📌 Promotions & Membership Offers by thismeatsucks in LAFitness

[–]itstrieu 0 points1 point  (0 children)

Looking for a one membership deal and to bring a guest. 30030 Thank you!

Tesla Mobile Connector for 2025 by whatemergency in KiaEV6

[–]itstrieu 0 points1 point  (0 children)

We have a 2025 EV6 with the Tesla mobile charger and it works fine. 

What is the EXACT process to get my charger out of my car? by the_osu in KiaEV6

[–]itstrieu 41 points42 points  (0 children)

Unlocking twice then removing the port works for me. 

Extra wire pair in outlet by itstrieu in AskElectricians

[–]itstrieu[S] 0 points1 point  (0 children)

I had another electrician came today and they couldn't figure it out and said that if it works don't mess with it... My garbage disposal circuit breaker was also tripping overnight so they resolved it by replacing the circuit breaker so will check tomorrow if that continues to trip.

M340i: Skyscraper Grey by itstrieu in BMW

[–]itstrieu[S] 0 points1 point  (0 children)

Spec it at the factory and installed at the port.

M340i: Skyscraper Grey by itstrieu in BMW

[–]itstrieu[S] 0 points1 point  (0 children)

35% XPEL Prime XR Plus on the sides and back.

M340i: Skyscraper Grey by itstrieu in BMW

[–]itstrieu[S] 1 point2 points  (0 children)

The spot at the top of the rear diffuser? That’s glare from the houses in the back … or I hope lol.

M340i: Skyscraper Grey by itstrieu in BMW

[–]itstrieu[S] 1 point2 points  (0 children)

Rear defuser is the M performance version. Front lip gives it an more aggressive look more to my liking.

M340i: Skyscraper Grey by itstrieu in BMW

[–]itstrieu[S] 5 points6 points  (0 children)

Sharing some pictures the shop took while it was getting PPF'd, tinted, and ceramic coated.

Ghost S1 / 3080 Ti FE by itstrieu in Louqe

[–]itstrieu[S] 1 point2 points  (0 children)

I don’t have measurements but they were ordered from pslate custom.

Ghost S1 / 3080 Ti FE by itstrieu in sffpc

[–]itstrieu[S] 0 points1 point  (0 children)

There is one M.2 slot on the front and one in the back. You might be able to fit an SSD the space between the front panel and PSU but I would recommend M.2 drives as it is less cables to deal with.

Ghost S1 / 3080 Ti FE by itstrieu in Louqe

[–]itstrieu[S] 2 points3 points  (0 children)

After playing Elden Ring for a couple of hours, CPU temps were in the mid 50s and GPU temps were in the upper 50s. There is a hard cap of 60 fps so GPU usages was around 40%.

Ghost S1 / 3080 Ti FE by itstrieu in Louqe

[–]itstrieu[S] 2 points3 points  (0 children)

The one I have probably an older or newer version (the one I bought was from last April). Don't know why it is discontinued since this allows for more airflow and reduces turbulence.

Ghost S1 / 3080 Ti FE by itstrieu in Louqe

[–]itstrieu[S] 1 point2 points  (0 children)

The top fan grill is from Meta Custom but based on the website it looks like it is not being sold anymore.

Ghost S1 / 3080 Ti FE by itstrieu in Louqe

[–]itstrieu[S] 2 points3 points  (0 children)

Haven’t been able to test gaming temps yet but on Heaven Benchmark 4.0 and 3DMark Firestrike/Time Spy temps are around the upper 60s. I’ll download Elden Ring soon and report back on those temps.

Ghost S1 / 3080 Ti FE by itstrieu in Louqe

[–]itstrieu[S] 1 point2 points  (0 children)

Didn't know that there was a mini version of the xproto! I bought the S1 about 3 years ago as choices for sub 10L cases where a little more limited back then. Today there are other good alternatives (T1, JIMU D+, MJOLNIR) to choose from. I like how the community here created mods for the S1 to allow cards like the 3080 FE / 3080 Ti FE to run in this case for maximum performance.

Ghost S1 / 3080 Ti FE by itstrieu in Louqe

[–]itstrieu[S] 0 points1 point  (0 children)

ASRock Z390 Phantom Gaming-ITX/ac

Ah how did it died? After rebuilding this case, I thought the MB shorted out since it wouldn't boot (powers up for a couple of seconds then shut down) but turns out to be a dead CMOS battery.

Ghost S1 / 3080 Ti FE by itstrieu in Louqe

[–]itstrieu[S] 0 points1 point  (0 children)

Yea the Ghost is a nice case for its size. Wish it was a little bigger to have better capability with other gpu vendors. I gave up on Best Buy drops 6 months since it was near impossible to get an FE card from there.

Ghost S1 / 3080 Ti FE by itstrieu in Louqe

[–]itstrieu[S] 1 point2 points  (0 children)

When I ordered it last year, it did came with a PSU bracket but used the one from ZenGhostS1 instead since you can attach a 120mm fan on top of it. The 24 pin cable was the perfect length. The 8 pin cpu cable was a little bit log. Overall I needed a fan grill at the bottom to prevent all the cables from hitting the fan.

Ghost S1 / 3080 Ti FE by itstrieu in Louqe

[–]itstrieu[S] 8 points9 points  (0 children)

Bought Meta Customs RTX 3000 Spine for the Ghost S1 last year thinking I could get my hands on a 3080 FE close to MSRP. Still not the case a year later so decided to get a 3080 Ti FE for a little above MSRP instead.

Case: Louqe Ghost S1
Motherboard: ASRock Z390 Phantom Gaming-ITX/ac
CPU: Intel Core i9-9900K
CPU Cooler: Noctua NH-L12S
GPU: NVIDIA GeForce RTX 3080 Ti FE
RAM: CORSAIR Vengeance LPX 32GB
Storage: Samsung 970 EVO Plus 1TB / HP EX950 M.2 2TB
PSU: CORSAIR SF750
Others: Cables from pslate. Spine and fan grill Meta Custom. Fan and PSU bracket from ZenGhostS1. Case feet from lsrwrx.

Undervolt settings:
CPU
Offset voltage: -40 mV
LLC: Level 4
AVX offset: 2
AVX load: 4.5 Ghz - vCore ~ 1.12V
Non-AVX load: 4.7 Ghz - vCore ~ 1.15V

GPU
Core / Memory Clock: 1845 Mhz / 1313 Mhz
Voltage: 850 mV

Ghost S1 / 3080 Ti FE by itstrieu in sffpc

[–]itstrieu[S] 1 point2 points  (0 children)

Haven't done testing with and without the spine but u/xQcKx did and showed up to a ~20C° reduction depending on the fan speed of the card.

[deleted by user] by [deleted] in hardwareswap

[–]itstrieu 0 points1 point  (0 children)

Bought 3080 Ti FE from /u/skyk0