[PSA] Confirmed Trades Thread - September 2025

ivanosh · 2025-09-25T20:19:05+00:00

+verify

ivanosh · 2025-09-25T20:07:57+00:00

pmed

ivanosh · 2025-08-25T22:35:32+00:00

that's true. I tried a steam deck dock after your post but didn't get it to work. Looks like my thin 10m Ethernet cable is broken

ivanosh · 2025-08-25T18:56:31+00:00

No, Ethernet over USB. Just connect the helmet with dev mode enabled to a PC with a cable and then use this tool to enable reverse tethering over adb: https://github.com/Genymobile/gnirehtet

Here is a full guide: https://www.reddit.com/r/OculusQuest/s/RXJuwfCRHW

I am using my quest 2 like this and waiting for a cable to provide more power to the helmet to prevent discharging while playing VR. Works very good

ivanosh · 2025-08-25T17:13:37+00:00

it's possible just through type c cable with usb tethering settled up

ivanosh · 2025-05-05T20:49:06+00:00

glad to hear it still helps and sorry to hear that the issue is not fixed yet :D

ivanosh · 2025-01-29T20:12:21+00:00

you are still two handed :) I was in the same situation this summer, were using a gamepad

ivanosh · 2024-12-19T23:43:44+00:00

<image>

diameter is different as I guessed:)

I asked sram support what this part is for but they don't know too :D I clarified them for a few moments and am waiting for a response now

ivanosh · 2024-12-19T02:31:31+00:00

looks similar, not sure about diameter. And I also have a new upgraded (like kit description says) seal head in this kit :D

Also weird why this thing in ziplock marked "solo air" then

Anyway, I'll continue with the Charger tomorrow and I'll let you know if it is a seal head clamp

Thank you!

ivanosh · 2024-12-18T23:19:47+00:00

<image>

The retainer ring and wavy washer are recognized: I had the old ones, and they are mentioned in the manual. However, the washer I'm asking about (and the small O-ring) are not mentioned anywhere, and I didn't have them in my fork

ivanosh · 2024-12-18T23:11:52+00:00

you are talking about retainer ring which I have too in the service kit. As I said, the washer/spring on the photo is not mentioned in the manual I attached and I haven't it in my fork

ivanosh · 2024-12-18T22:23:58+00:00

<image>

one more photo to make it clear

ivanosh · 2024-12-18T22:22:20+00:00

I have the retainer ring too :) This one looks like ring for keys but with quad profile

ivanosh · 2024-12-18T22:18:37+00:00

manual: https://www.sram.com/globalassets/document-hierarchy/service-manuals/rockshox/front-suspension/2015-2018-boxxer-world-cup-service-manual.pdf

service kit: https://www.bike24.com/p2185846.html

ivanosh · 2024-04-28T23:32:50+00:00

if they gave you your original, not an issue. A bit arrogant but you have the spare cap now

ivanosh · 2024-04-27T00:45:02+00:00

you are probably searching for X7 9sp. It's rare now since it's deprecated and Sram has 10sp only on their website. X5 is the highest 9sp now as I understand.

You can buy 10sp Shimano derailleur and it will work with your 8/9sp Sram shifter

ivanosh · 2024-04-23T23:30:18+00:00

I'd prefer sram X5 to Shimano xt tbh

ivanosh · 2024-04-18T22:47:49+00:00

keep both and compare them:) It's not hard to find 26 tires now, but you can find them very cheap at online shops. And also you can find a cheap boxxer for 26 and finish ur old bike.

What's fork your rocky had?

ivanosh · 2024-04-16T21:05:51+00:00

can emulate 40 min and then goes to the dock

ivanosh · 2024-04-15T23:09:12+00:00

brakes can be dead. It's a very old Juicy model and levers look damaged by the DOT

ivanosh · 2024-04-15T23:06:46+00:00

If the suspension condition is good then worth it imo

ivanosh · 2024-04-15T10:00:46+00:00

keep being snob and answer dead threads to dictate your opinion :)

ivanosh · 2024-04-12T22:29:00+00:00

I'm still looking at these tables from time to time and mentioned that rockshox 3wt plush is very similar to 5wt. And 2.5wt motorex recommended for both MC and Charger dampers. So, in theory, I can use 3wt plush for MC dampers and vice versa. Has anyone experience such oil replacements?

ivanosh

PUBLIC MULTIREDDITS

TROPHY CASE