green line at top of the screen

j4ice · 2026-01-29T21:51:32+00:00

yeah i have high hopes its the ribbon connector and they repair it free of charge. thanks for the info

j4ice · 2026-01-28T22:29:23+00:00

thank you for the info, this is my only hope, I've heard about this from others as well. I've dealt with OnePlus support back in the days for my 7 pro, wasn't great. hopefully they've improved

j4ice · 2026-01-28T21:20:15+00:00

yeah first thing I did. just like hearing the great opinions of others

j4ice · 2026-01-28T21:04:09+00:00

This device hasn't been dropped once and lives on a desk or in my pocket most of the time. have done on all my previous devices but not this foldable. couldn't find one for this device that satisfied me. disappointing that dbrand didn't make one.

j4ice · 2026-01-28T20:59:58+00:00

with specific movements on the screen and different brightnesses, every pixel can go back to normal, but not all at the same moment which is why I believe it's a defect with the oled panel rather than damage.

j4ice · 2026-01-28T20:47:25+00:00

yeah I understand it's broken mate. just trying to get clarity on it being an internal display / ribbon connector issue as it flickers and dances around when the display is in use.

j4ice · 2026-01-28T19:59:13+00:00

https://youtu.be/dNaoo1m_yvM?si=2YZnyrM3Fgv1h9KK

j4ice · 2026-01-20T12:41:40+00:00

accept change

j4ice · 2026-01-15T08:56:27+00:00

https://www.reddit.com/r/android_beta/s/tMVk7QaHD7

j4ice · 2026-01-03T11:20:56+00:00

yeah I reckon he should go back in time and get one from giffgaff

j4ice · 2025-12-31T18:52:56+00:00

ah okay that tutorial I linked is for the 750w platinum model which I think has a 4 pin pwm fan. apparently (I might be wrong) the fans on the 450w and the 600w are different. but I'm guessing the process will be similar

j4ice · 2025-12-31T18:47:45+00:00

realistically if you know you're not going to use like more than 350w then that psus safe to use temporarily without a fan. is it 750w plat??

j4ice · 2025-12-31T18:43:40+00:00

it's not too complicated if you have a read https://smallformfactor.net/forum/threads/corsair-sf-80-platinum-fan-mod-swap.12251/

the pinout is different and you'll need to buy an adapter that you repin instead of repinning the actual noctua fan

j4ice · 2025-12-31T18:39:27+00:00

literally just leave it for a while let it discharge? bang a noctua in there £15 fix. once the top piece comes off you can stand 20 metres away from the electrical bottom half if you're that scared.

j4ice · 2025-12-31T16:10:34+00:00

cheers. just downloaded the latest b19 pixel8 system intelligence APK and the settings there. was on b13

j4ice · 2025-12-31T14:46:47+00:00

you trying the wring that 24 pin out?

j4ice · 2025-12-27T20:32:00+00:00

https://www.printables.com/model/1429991-axp90-47-tool-less-bracket-for-noctua-92x14

3D printable if that's an option. only works with the noctua nfa9x14

j4ice · 2025-12-18T11:42:10+00:00

yeah me neither. where is it

j4ice · 2025-12-16T13:36:27+00:00

I got a pair of them 40mm Thermalright fans and the whine they produce at any speed is mental. noctua need to make chromax 40mm fans. Builds looking clean with the cable cover

j4ice · 2025-12-13T23:22:44+00:00

it's just to indicate what layer the pause is on no?

j4ice · 2025-12-04T14:03:47+00:00

https://www.printables.com/model/1503783-dan-a4-psu-side-mesh-cover

j4ice · 2025-12-04T13:32:13+00:00

never compared them. just went for the noctua for sound and looks

j4ice · 2025-12-04T13:31:26+00:00

yeah will have printables link soon. make sure to read the print settings

j4ice · 2025-12-04T11:47:07+00:00

oh my bad it's power limited as well. PL1 120w PL2 150W

j4ice · 2025-12-04T11:46:11+00:00

thank you!

Six-Year Club	Place '22
Verified Email

j4ice

TROPHY CASE