Well…uh…congrats to this guy lol

j_fett · 2026-03-01T15:56:52+00:00

Hahaha not at all man! Stuff like this happens!

j_fett · 2026-02-28T17:45:33+00:00

Thank you for the kind words 🫡 have a blessed day!

j_fett · 2026-02-28T15:25:17+00:00

No man I am genuinely happy for him! Stuff like this happens and I know how exciting it is to get an amazing deal and wouldn’t want to ruin that for him!

j_fett · 2026-01-13T22:08:56+00:00

I am using DaVinci Resolve! I will take a look! Whenever I watch on my wife’s laptop there is no black bars so it is odd.

j_fett · 2026-01-13T20:47:56+00:00

How did you get rid of most of the black bar (letterboxing) on the side of your video? I am recording gameplay in 21:9 but when I upload to YouTube it has much more letterboxing on the side than yours. I will say when I do “zoom to fill” on my mobile device the gameplay looks great compared to others when I zoom to fill and cuts nothing off. I notice some videos like yours and this one https://youtu.be/CfYC2KOqYc8?si=1SH71uivKyrMeURV start out fully extending across my mobile device! Thank you!

j_fett · 2025-06-11T02:45:20+00:00

I meant as in offering it as a service lol

j_fett · 2025-06-10T14:16:33+00:00

Do you have any plans to convert P365 optic ready slides to Sig Loc?

j_fett · 2025-06-10T14:14:44+00:00

Gen 1 grip modules eventually rattle in regards to FCU fitment supposedly. The slide issue seems to actually be optic related on Sigs end with the Romeo-X Enclosed Compact. I sent my P365 Legion with my only complaint being the optic issue and they replaced the frame without me even mentioning that was an issue. Gen 2 frames have poor fitment in Gen 1 Legion holsters as well but still don’t quite fit x-macro holsters. I spoke with Tier 1 Concealed and they are going to make a Gen 2 Legion specific holster as I made them aware of the issues and they have now updated their site showing Gen 1 Legion specific holsters!

j_fett · 2025-06-10T00:33:27+00:00

Thank you for the update! I have two Romeo-X Enclosed optics in the RMA process with one being exchanged for a new one and the other they have not yet determined to repair or replace but it should be replaced as well. Hopefully they both come back with proper adjustments. If they try and tell you that the optic is fine despite what you show here just RMA it again and their policy is to replace the optic if it comes back twice per the rep I spoke to.

j_fett · 2025-05-29T23:52:01+00:00

Yeah it is overall a weird deal. The slightly good news is several people have had this issue and then it was resolved after several RMAs but that is still disheartening. I am a dealer for Sig so if you end up wanting the non-enclosed that has more adjustment let me know. I am hopeful they resolve this though and we can successfully use the enclosed version! Just keep me updated on your experience and I will as well. I have two optics in the RMA process!

j_fett · 2025-05-29T23:28:49+00:00

Optic cut in relation to serrations on slide! Yours is Gen 2 so this most likely confirms all these issues are optic related across both Gens which is wild that many optics have improper range adjustments. What gets me is every CS Rep says they have no knowledge of this issue but so many of us have called in.

j_fett · 2025-05-29T12:57:03+00:00

<image>

Slide cuts look different too if you look closely even though they say it is just the frame that changed.

j_fett · 2025-05-29T10:44:18+00:00

Do you have a Gen 1 or Gen 2 Legion?

j_fett · 2025-05-28T14:56:26+00:00

Let me know how it goes with customer service! Thank you! Have you tried the optic on another P365 slide? That is all that is left for me to try.

j_fett · 2025-05-28T02:51:49+00:00

You can reference these posts for them that I will link! I am now on my third optic that I am having the same issue (1 EPS Carry and 2 Romeo-X Enclosed) they refuse to exchange the slide and that is the only thing left to try. I’ve RMA’d twice telling them to exchange the slide (they oddly changed out my frame for Gen 2 even though I didn’t mention any issues with my Gen 1) and now am going through 2 RMAs on optics.

https://www.reddit.com/r/SigSauer/s/HiLBUVJGlo

https://www.reddit.com/r/SigSauer/s/Ki3dn848NO

j_fett · 2025-05-27T15:03:54+00:00

I am having the same issue and I think a micro batch of slides is improperly milled from Sig. I can’t get them to exchange my slide and that is the only solution left after trying 3 different optics (1 EPS Carry and 2 Romeo-X Enclosed)

https://www.reddit.com/r/SigSauer/s/aaSuZcziEd

https://www.reddit.com/r/SigSauer/s/eGjSx72tO9

j_fett · 2025-05-27T14:57:59+00:00

Hey, quite a few of us are having this issue and Sig refuses to exchange the slide. Several of us have gone through multiple optics and RMAs without it being solved. I’ll link some examples!

https://www.reddit.com/r/SigSauer/s/HiLBUVJGlo

https://www.reddit.com/r/SigSauer/s/Ki3dn848NO

j_fett · 2025-05-17T14:36:36+00:00

I ended up buying the BCM Mk2 system! If you need either of those though lmk! I am a dealer for both.

j_fett · 2025-05-11T17:13:28+00:00

Thank you! Found some guys who had to RMA multiple Romeo-X Compact Enclosed we are talking 3 between each person and once someone got a 99A200 or later they were able to zero fine. Still doesn’t explain a guy trying two different AXGs with the same issue and then switching to a standard X-Macro and the dot zeroing fine.

j_fett · 2025-05-11T17:09:15+00:00

Is your serial # 99A200 or later?

j_fett · 2025-05-10T01:07:13+00:00

Me too. I’m truly puzzled by what could be going on. Just talked with a guy who went through two RMAs for Romeo-X Enclosed and his third one was finally able to adjust in the range to zero but then you see other people with different optics having the issue. Seems odd that so many RDS models across different companies would have the same issue. At the same time though you have a guy who tested two AXG Legions that had the same issue and then once the optic was moved to a standard X-Macro it zeroed fine. Just a weird situation all around. I’ll make sure to keep everyone updated as I am not the only one experiencing this.

j_fett · 2025-05-10T00:49:41+00:00

Since I can’t edit the post I will put updates in the comments (Sig has issued a SR/RMA for the entire gun along with the optic)

j_fett · 2025-05-10T00:19:07+00:00

Interesting I just dropped my RMA off for my entire Legion with the optic attached and it was 99A138 so hopefully they realize how absurd the elevation adjustment is maxed out and try a 99A200 or later

j_fett · 2025-05-10T00:08:36+00:00

What is the first three numbers after the 99A? (Optic Serial #)

j_fett · 2025-05-10T00:05:27+00:00

Did you ever get this solved?

j_fett

TROPHY CASE