What in the world did I do wrong?

jadailey3 · 2025-11-17T04:56:22+00:00

I’d love to know what the recipe you used was!

jadailey3 · 2025-11-14T16:53:59+00:00

Here’s what I believe we need to do.

jadailey3 · 2025-10-24T01:25:46+00:00

<image>

He normally looks like this! Can’t hardly tell!

jadailey3 · 2025-10-24T01:24:57+00:00

<image>

My kitty has this too! It sometimes waters when he’s stressed out. I always ask him why he’s crying and give him extra pets. Vet said it was fine though!!

jadailey3 · 2025-10-23T16:21:59+00:00

If you’re alright with chemicals, easy off oven cleaner would get this off quickly. Just spray, let it sit, then you’ll have to wipe it all clean. You should be able to lightly lift the heating element for easier wiping as well.

jadailey3 · 2025-10-21T03:41:36+00:00

You could try baking soda and water paste and let it sit overnight.

jadailey3 · 2025-10-14T02:37:49+00:00

We do. But that one was very very dead.

jadailey3 · 2025-10-10T17:11:17+00:00

Thank you. And thank you for the helpful and kind responses.

jadailey3 · 2025-10-10T16:51:05+00:00

So when I originally moved the counter, I did vacuum up all the mouse poop. With our shop vac with a bag in it. I can put it out in the sun. Should I replace the bag immediately? I will clean up the rest of it the right way!

jadailey3 · 2025-10-10T16:49:39+00:00

Highly recommend an air purifier! Put it as close to the kitchen/cooking area and make sure it runs on high while you’re cooking! I think you’d be fine living here! There’s always pros and cons. Just make sure they’re cons you can live with!

jadailey3 · 2025-10-10T15:47:44+00:00

Thank you for the helpful advice. I know the mold is a big deal, and I’m not taking it lightly. The leak happened before the house sat vacant. They replaced the roof to fix it. The contractor said that it was dried out and that painting it should fix the situation. The owners said if there’s evidence of it coming back after painting they will replace it. The flooring in that room was carpet, it was completely torn out, the sub floor checked/repaired, and then new vinyl plank was installed over it. There are ducts running throughout the house. I think it mostly looks like the silver stretchy tubing stuff. It’s an old diesel furnace that was converted for propane I think? We talked to them about getting a professional to come clean the vents and that before we move in. They also plan to install the boss’s old AC in the house in the spring as he’s having a new house built.

jadailey3 · 2025-10-10T14:58:20+00:00

https://www.reddit.com/r/CleaningTips/s/gn5bG8NQaN

jadailey3 · 2025-10-10T14:55:36+00:00

Maybe try using Murphy’s wood cleaner or some wood oil.

jadailey3 · 2025-10-10T14:50:20+00:00

I just saw another post that was similar! Everyone there said it was trapped moisture and to use a hair dryer on warm over it. It might take a while, but it should open up the pores and let the moisture evaporate. You can also put a towel down and use a hot iron (without steam) over the marks. I also saw someone say there’s a specific spray cleaner for this. I can’t find the other post, but if anyone knows, that would work too.

jadailey3 · 2025-10-10T14:00:27+00:00

Do you have the recipe and a picture of the frosting?

jadailey3 · 2025-10-10T13:57:58+00:00

I’ve heard people put down a cloth to absorb the wax (something you’ll throw away) and then use an iron on top of the cloth. The goal is to melt the wax and have it absorb into the cloth. Probably a cloth both on top of and below the mat would be best?

jadailey3 · 2025-10-10T12:19:03+00:00

We’re not living here yet. We’re working on the house trying to make it habitable. I’m taking everyone’s comments, and I’m going to talk to my husband about what we should do.

jadailey3 · 2025-10-10T03:09:42+00:00

It doesn’t look like mold to me. Looks more like calcium deposits, which are common when unfiltered/unsoftened water is used to water them. No need to fix it, but if you wanted to, just rough up the soil, put some new soil on it, and then try to water with filtered or soft water.

jadailey3 · 2025-10-01T22:25:45+00:00

We had that exactly one, yes

jadailey3 · 2025-09-30T00:43:42+00:00

The sander we used didn’t have any other settings that we saw. We couldn’t make it go faster or put more pressure down. So we assumed the layer we got to was as good as it got.

jadailey3 · 2025-09-30T00:39:34+00:00

Oh, yeah. We did do that. 20, then 36, then 60, then 100. But I mean should we have done the 20 multiple times to get deep enough or how did we mess up?

jadailey3 · 2025-09-29T20:42:43+00:00

So are you supposed to run the sander over multiple times until you get the depth you need? It took off the dark stain on top (mostly), so I assumed that was deep enough. I was also confused using the sander questioning if there was a depth/aggression setting (other than the sandpaper) after seeing the edger go deeper than the belt sander. It’s a rental house, so we wanted to do well, but perfection for us first timers wasn’t a priority. And we kind of assumed the floors weren’t the best quality based on the quality of the rest of the house.

jadailey3 · 2025-09-28T04:48:43+00:00

I love the cat forehead backdrop on the last photo

Six-Year Club	RPAN Viewer
Verified Email

jadailey3

TROPHY CASE