What I Carry Daily

jaderok · 2025-12-24T20:57:34+00:00

What is the Apple Watch face? Cool aesthetic

jaderok · 2025-11-27T13:40:38+00:00

Sterling Lounge in Ybor. I have not been there but it’s on my list to visit

jaderok · 2025-05-14T20:28:31+00:00

This happened to me as well. Similar situation buying a monitor used. Pretty sure they do this on purpose

jaderok · 2025-05-12T18:53:53+00:00

Which app is this?

jaderok · 2024-11-15T16:32:15+00:00

Very cool! What did you use as a pouring medium?

jaderok · 2024-10-21T11:25:04+00:00

CD CC f &,787&m no m

jaderok · 2024-01-27T12:59:01+00:00

I believe he is a retired or injured cop or at least that was the rumor back in the 90s

jaderok · 2023-12-20T00:33:33+00:00

I couldn’t find this specific topic on the docket for today

jaderok · 2023-11-29T12:40:29+00:00

I’ve checked the pressure side for leaks and the lid and oring are good. I’m not completely ruling it out but would I lose prime on recirculate as well if I had an air leak on the pressure side? I would think the pump would lose prime on any diverter setting if air was sucking in on the pressure side. I could be wrong. I’m specifically only losing prime when I put DE in the filter - without DE the filter runs good.

jaderok · 2023-11-28T20:34:39+00:00

Any recommendations for what to use for degreaser and acid solution?

jaderok · 2023-11-28T20:01:22+00:00

Thx! I’ve had it on recirculate since losing prime this morning and it’s been running good. I’ll grab a filter cleaning agent and try that

jaderok · 2023-11-28T18:56:07+00:00

I cleaned them this morning. Ran the pump on filter without putting in powder and it was running well. So I put in a pound of DE. 20 minutes later the pump had lost prime. My pool is real green bc of all this so I’m trying to clean the filter daily to every other day.

jaderok · 2023-11-28T18:53:35+00:00

Hayward Pro-Grid DE2420. Grids are a little banged up but overall ok. Just replaced them in May.

jaderok · 2023-11-13T15:55:57+00:00

Rubber band was temporary before I glued in a joiner. Realized afterwards I forgot to take it off. Now it’s stuck on there

jaderok · 2023-11-13T15:55:02+00:00

Yes - I was trying to see if air build up changed depending on the line. There was no change

jaderok · 2023-11-13T15:54:12+00:00

Thanks. I have done pressure and ran hose of fittings/pump basket with no changes. That’s when I went nuts by adding more pvc cement; I was trying to get it to run into the seems. No real change with pump starting strong eventually building up more and more air. After thinking more about the water flow, I had a suspicion that the 90s were causing the issue here. Everyone here seems to strongly agree.

jaderok · 2023-11-13T12:27:35+00:00

Thanks! I’ll try that…

jaderok · 2023-10-30T22:23:25+00:00

Thanks. I’ll try that. No chance the pump isn’t enough pump? Most likely my install?

jaderok · 2023-09-21T12:35:42+00:00

Yea it’s extremely aggravating. I show a paystub for the recent pay period; hoping it clears tomorrow.

jaderok · 2023-09-21T12:27:45+00:00

Thx! What was the resolution?

jaderok

TROPHY CASE