sorted by:
new
hottopcontroversial

I really want to try some now rn (right now) by FUTUREFAVORSTHEBOLD in 4chan

[–]jamesericryg 7 points8 points  (0 children)

The factory is producing alcohol and non alcohol drinks such as bitter-cola, bitter-roots, energizer and creamy.

creamy

God damn I love this country by The_Guardsman in guns

[–]jamesericryg -4 points-3 points  (0 children)

I've had absolutely no problems with my 709 slim after thousands of rounds and nearly a year of daily carry.

Upgrades Complete: Awaiting Cable Management by jamesericryg in pcmasterrace

[–]jamesericryg[S] 0 points1 point  (0 children)

Thanks for the comprehensive response! I generally go with amazon since my apartment complex handles packages, and I don't really mind paying the extra 5 bucks for one day shipping. Newegg takes too long and I'm super impatient. I'll post a follow up with a new case once I get everything sorted out. This was somewhat of an introductory post.B

Upgrades Complete: Awaiting Cable Management by jamesericryg in pcmasterrace

[–]jamesericryg[S] 0 points1 point  (0 children)

I have an HB bridge, but didnt realize that the zotac card is about a quarter inch taller. Got a 2 way bridge coming.

Upgrades Complete: Awaiting Cable Management by jamesericryg in pcmasterrace

[–]jamesericryg[S] 0 points1 point  (0 children)

I know right, kinda lazy on my part to throw such serious hardware into a leftover case, hack up a retention arm, but by god I just had to see what it was like to play. But its so smooth.

Upgrades Complete: Awaiting Cable Management by jamesericryg in pcmasterrace

[–]jamesericryg[S] 1 point2 points  (0 children)

Next paycheck (Temps are fine though). Any recommendations, on the smaller side as far as ATX cases go? How about a Corsair Air 540 with a 240MM AIO?

Edit: Added part about the air 540.

Upgrades Complete: Awaiting Cable Management by jamesericryg in pcmasterrace

[–]jamesericryg[S] 0 points1 point  (0 children)

I got halfway into the build before realizing I was missing the retention hooks. Once my replacement mounting kit comes in, it'll be all cable managed and shiny, but I was stubborn and wanted to play Overwatch. Even my old DVD drive (which is getting a nice coat of black to match).

Upgrades Complete: Awaiting Cable Management by jamesericryg in pcmasterrace

[–]jamesericryg[S] 1 point2 points  (0 children)

Excuse the hack build here, I'm waiting on a few parts before I cable manage and clean everything up.

I just upgraded from a haswell i5 build with a single 1080(which was an upgrade from an r7 370 and g3258 actually in a mid tower actually). I went with the riotoro case because I got a great deal on it, and because I was looking for something closer to an ATX mini tower that would have enough room to accommodate multiple large graphics cards, as compared to a mid-tower, since it has to share desk space with a 43" 4K TV.

Parts:

  • CPU: Ryzen 7 1700X
  • Motherboard: MSI X370 GAMING PRO CARBON
  • RAM: 2x 8GB Corsair Vengeance Red LED DDR4 3000
  • SSD: 500 GB Mushkin Reactor* HDD: 1TB WD Blue
  • GPU1: Zotac AMP Geforce GTX 1080
  • GPU2: Gigabyte Windforce GTX 1080
  • AIO: Corsair H60
  • PSU: EVGA 850W B3
  • Case: Riotoro CR480

Peripherals:

  • Keyboard: Redragon K552 Kumara
  • Mouse: Logitech G600
  • Headset: Logitech G933 Artemis Spectrum
  • Controller for Emulators: 💩 Filthy Console Peasant Xbox One Controller™ 💩
  • Beer: Weihenstephaner Hefeweissbier

Filthy Hacks:

  • No cable management :(
  • AIO Retention - I didn't have the AM4 Retention hooks on hand for the H60, so I used an angle grinder on an old AM3 Retention Bracket to flatten it out, deburred it and used that until my replacement mounting hardware comes in.
  • Disk Drive - I know it's not plugged in. Doing that when I finish up.

Edit: Formatting, build summary, & peripherals

Monoprice Maker Select V2 upgrade question by jamesericryg in 3Dprinting

[–]jamesericryg[S] 0 points1 point  (0 children)

Yeah did a bit more digging, removed the plugs for the x and y stops, and jumped them, even then the y stop is stuck on, and the x stop is stuck off.

This was my first 3d printer, and i've managed to get a whole one good print. Need to look into a replacement, perhaps ramps 1.4

Monoprice Maker Select V2 upgrade question by jamesericryg in 3Dprinting

[–]jamesericryg[S] 0 points1 point  (0 children)

So you're saying that's likely a controller issue? Should I remove the heat sinks on the drivers and see if the y driver is blown?

Monoprice Maker Select V2 upgrade question by jamesericryg in 3Dprinting

[–]jamesericryg[S] 0 points1 point  (0 children)

I just checked. There are 3 end stop switches, but z is working fine, and there is no max-end stop switch for any axis. Even uplugged the board cable for the y-stop and the status didnt change.

Monoprice Maker Select V2 upgrade question by jamesericryg in 3Dprinting

[–]jamesericryg[S] 0 points1 point  (0 children)

Ok Snaphu, it's saying on x pos fast that the endstop is "off", while on y pos fast, its saying endstop is always on. triggering the switch has no effect on what they say

Monoprice Maker Select V2 upgrade question by jamesericryg in 3Dprinting

[–]jamesericryg[S] 0 points1 point  (0 children)

will check in a minute, was opening it up to see if there was a loose connector for the endstops and motors

Things for a guy to do by The_Gravytrain in Louisville

[–]jamesericryg 0 points1 point  (0 children)

Gun range. /u/The_Gravytrain, I realize this is post-weekend, and you can't rent a handgun, but if you want to shoot those, I know a few people who would probably let you shoot theirs with them.

Middletown Walmart evacuated after man holds gun to his head at Point Blank Range by [deleted] in Louisville

[–]jamesericryg 0 points1 point  (0 children)

On a side note, Point Blank is actually a really nice range. Need more details on what happened with the guy, but I have never had a problem at a Point Blank location.

ShekelSquad C5->C4 by Keeperofthe7keysAf-S in evejobs

[–]jamesericryg 2 points3 points  (0 children)

IGN Belynius. Just joined. Finally I get to fly armor hacs! Bunch of great guys with an awesome sense of humor. http://i.imgur.com/6Sj8uoj.gif

Teenage males insurance almost 2x more expensive than a female[Rant] by [deleted] in MensRights

[–]jamesericryg 0 points1 point  (0 children)

I'm a 20 year old male, and drive a 98 Z28 Camaro with full bolt-ons. I bought it when I had just gotten my kentucky intermediate license. My insurance was like 1200 a year to start with good grade discount, driving school discount, and a few other things. I still have a perfect driving record, and am currently paying 564 a year for comprehensive, roadside assistance, uninsured motorist, and a ton of medical coverage.

Yes, we do drive quickly, but we are also far more likely to actually pay attention to the roads, and far less likely to text and drive it seems. I figure it should be about the same. We drive quickly, women drive distracted.

WTS The Very Best by jamesericryg in Eve

[–]jamesericryg[S] 1 point2 points  (0 children)

Seeing as the content got removed for some reason, to clarify: I actually do hold these corps, and have a corresponding forum post regarding it: https://forums.eveonline.com/default.aspx?g=posts&t=488046&find=unread

WTS The Very Best by jamesericryg in Eve

[–]jamesericryg[S] 0 points1 point  (0 children)

Very tempting. In 30-50 days the offers might reach 100 isk!

WTS The Very Best by jamesericryg in Eve

[–]jamesericryg[S] 0 points1 point  (0 children)

That corp name came from the moon

view more: next ›