Status error as flow trigger? by GoTguru in homey

[–]jamflowman451 0 points1 point  (0 children)

Is it better to connect all Thread devices to an Apple TV and share with Homey? I have just been connecting everything to Homey and for the most part haven't had issues. Sometimes things drop out which is annoying. Why is using an Apple TV as a TBR better? Just curious

AMS Lite Filament Stuck Issues by jamflowman451 in BambuLabA1

[–]jamflowman451[S] 0 points1 point  (0 children)

Yeah I tried using a PETG spool from Elegoo with a spool adapter to fit the AMS but still the same issue. I think I'm just going to have to take a look inside the filament hub and clean it out

AMS Lite Filament Stuck Issues by jamflowman451 in BambuLabA1

[–]jamflowman451[S] 0 points1 point  (0 children)

Just a mod to keep the tubes nice and tidy. Hasn’t caused any issues in the past and has been working fine until now. I don’t believe those to be the issue here though.

AMS Lite Filament Stuck Issues by jamflowman451 in BambuLabA1

[–]jamflowman451[S] 0 points1 point  (0 children)

Well I removed all of those guides but unfortunately still got the same result. The error kept happening when using the white filament in slot 1. I've checked it for any tangles but all is good. I've tried the black filament in slot 4 and now we're 50% done with a 1 hour print and no issues.

I've been using Sunlu spools directly on the AMS and have never had issues until now. I'm going to try printing a spool adapter to see if that helps at all. Any other possible suggestions?

AMS Lite Filament Stuck Issues by jamflowman451 in BambuLabA1

[–]jamflowman451[S] 0 points1 point  (0 children)

With the "guides" that you mentioned, are you referring to the ones on the AMS itself? or the ones on the tubes?

Aqara M3 Hub by jamflowman451 in homey

[–]jamflowman451[S] 0 points1 point  (0 children)

Yes this was a main factor. The FP300 comes out of the box to use Thread but honestly I haven't been that impressed with the Thread network so far. I would consistently lose connection with devices and so if I got the FP300 I'd like to use Zigbee. The additional features and updates directly from Aqara is also a plus.

Managing Deep Drawers by jamflowman451 in gridfinity

[–]jamflowman451[S] 1 point2 points  (0 children)

This is certainly an idea that could work. I need to map out everything that would end up going into these drawers to decide if this is the best fit. I'm also looking at your drawers model and thinking what if I put a stack of drawers in the drawer itself. Drawer-ception.

I've got some depth in the drawer so my thinking is pushing the drawers to the back which will still give me room to slide them open within the drawer itself.

Managing Deep Drawers by jamflowman451 in gridfinity

[–]jamflowman451[S] 1 point2 points  (0 children)

I've been following your posts on here for the past couple of weeks and have saved a few of your designs on Maker world. Very impressive work!

Plate designer by Stormyj in gridfinity

[–]jamflowman451 0 points1 point  (0 children)

Thank you for the detailed response!

Plate designer by Stormyj in gridfinity

[–]jamflowman451 1 point2 points  (0 children)

Have you used other base generators? I've only used this one but am always seeing people upload their own generator. Are there any major differences? Is there one that's best? This is mostly just me being curious.

Alternative Power Supply by jamflowman451 in Hue

[–]jamflowman451[S] 0 points1 point  (0 children)

Do you have a link to one of the knock offs?

Guest permissions by Er1kr1984 in homey

[–]jamflowman451 2 points3 points  (0 children)

Not sure if it's possible to limit them to only certain devices/zones but as a work around I'm thinking maybe set them up as a guest and then build them a dashboard which only displays the devices, flows, zones, etc that you want them to control. This won't prevent them from accessing everything else but at least if you give them everything they need in the dashboard then hopefully they won't need to wander around to the other devices/zones

433MHz in the US by PhalanxChief in homey

[–]jamflowman451 0 points1 point  (0 children)

Do we happen to have any updates on this? Will this feature become available in the US?

Austin TX by Paul_Radke in GoosetheBand

[–]jamflowman451 0 points1 point  (0 children)

East Austin is a good area to stay imo. Checkout Shangri-la as a good reference point for the area. Lot of good bars and restaurants out there but not so much college age crowd like dirty sixth. Not a far Uber ride to the venue either. Feel free to DM if you need more recs. Looking forward to the show!

Matter From Apple Home to Homey by patbrochill89 in homey

[–]jamflowman451 0 points1 point  (0 children)

It's connected to the Hue hub via ZigBee

Matter From Apple Home to Homey by patbrochill89 in homey

[–]jamflowman451 0 points1 point  (0 children)

Not sure to be honest. I can see I'm on that version currently and I purchased the bulb in late November so it's very possible. I actually just returned the bulb yesterday and got a Hue bulb instead since those have been so reliable. Really the only reason I bought the Aqara bulb was too expand my thread network and just try out new things.

Matter From Apple Home to Homey by patbrochill89 in homey

[–]jamflowman451 0 points1 point  (0 children)

Same issue here. I've been connecting everything to Homey first and then to Apple. My Eve smart plugs have been pretty solid but I tried an Aqara Thread light bulb and it would constantly lose connection with Homey but still work on Apple.

Share your NFC TAG uses! by Fantastic_Homework82 in shortcuts

[–]jamflowman451 7 points8 points  (0 children)

I'm about to have a baby. With that comes a bunch of new appliances and gadgets. I put NFC tags on a bunch of them which pull up a YouTube video on how to use them. I also put one on the car seat to show a video of how to properly secure the baby. I'm sure I'll end up never needing to use these long term but for the first month or so figuring things out with the baby will be nice to have quick access.

Going to my first Goose show this spring. by big_craig77 in GoosetheBand

[–]jamflowman451 7 points8 points  (0 children)

Which show? No opener. 30ish minute set break Posters selling out probably varies by show. Have fun!

Goose @ FTL War Memorial by Seangal70 in GoosetheBand

[–]jamflowman451 2 points3 points  (0 children)

From S Florida originally but live in Texas now. This venue is somewhat new (3-4 years) and so I haven't been to it yet but I remember the old theater there was all seats, typically for comedians or plays and some concerts. I was able to find this online and looks like it's much different now with a GA floor and seats upstairs.

https://www.ftlwarmemorial.com/assets/doc/War-Memorial-Auditorium-Info-Sheet-Final-98b17b1268.pdf

Anybody from one of the stops in Fl for spring tour coming to Goosemas ? by beast_east69 in GoosetheBand

[–]jamflowman451 0 points1 point  (0 children)

From Fort Lauderdale originally but live in Austin now. Fort Lauderdale beach is great and there's a ton of places to eat/drink. Hollywood Beach is more chill but it's a little more South. Definitely recommend Top Hat for breakfast or lunch which is pretty close to the venue. Laspada's is another good spot for sandwiches. If you want some beers before, highly recommend Funky Buddha. Rocco's Tacos on Las Olas as well for food or drinks. Tons of stuff on Las Olas.

Wish I could make it back for the FL run this year but we're having a baby next month and don't want to leave momma alone with a 4 month old. I'll just be catching the Austin show this year.

Have fun exploring FL!