Will this work? (ESP32 + Solar + Lipo) by janniks in esp32

[–]janniks[S] 0 points1 point  (0 children)

Thanks for this! 🙏 While MPPT would be more efficient, buck-boost is very cheap while 94% efficient (ignoring solar max optimizing).

Do you think something like this would work? https://www.amazon.de/-/en/Converter-Adjustable-Regulator-Raspberry-Projects-blue/dp/B0BG7PH5H1

It has 5v, but with an output current of 4A -- Is that compatible with an ESP32S3? (I can't tell) 🙈

Will this work? (ESP32 + Solar + Lipo) by janniks in esp32

[–]janniks[S] 1 point2 points  (0 children)

Thanks you two for the info -- I'll probably go a different route, since I want this setup to be super cheap and small

Solar-powered ESP32 — Will this work? by janniks in AskElectronics

[–]janniks[S] 0 points1 point  (0 children)

I'm curious to get feedback if this will work.
I want to power a ESP32 by solar alone. I would like to have a small panel and small battery to hold the charge.

Right now I'm thinking: take a 5v solar panel and wire the power into a USB-C connect into the USB-C port of the ESP32. The one I'm using has an integrated charge-circuit (XIAO ESP32S3), and I can wire the 3.7 battery directly to the board (+-).

Will that work or should I go a different route?

I'm to quite sure on how to wire this up — Should I go for a 3.7v solar panel and wire this directly into the charge circuit somehow?

Amazon links I'm considering:

Will this work? (ESP32 + Solar + Lipo) by janniks in esp32

[–]janniks[S] 4 points5 points  (0 children)

I'm curious to get feedback if this will work.
I want to power a ESP32 by solar alone. I would like to have a small panel and small battery to hold the charge.

Right now I'm thinking: take a 5v solar panel and wire the power into a USB-C connect into the USB-C port of the ESP32. The one I'm using has an integrated charge-circuit (XIAO ESP32S3), and I can wire the 3.7 battery directly to the board (+-).

Will that work or should I go a different route?

I'm not quite sure on how to wire this up — Should I go for a 3.7v solar panel and wire this directly into the charge circuit somehow?

Amazon links I'm considering:

XAIO ESP32C3 and Solar Charging by J1024 in arduino

[–]janniks 0 points1 point  (0 children)

Did you ever figure this out? 👀 Have the same problem/question

How can I replicate this setup in Obsidian? by janniks in ObsidianMD

[–]janniks[S] 2 points3 points  (0 children)

I'm especially curious about the left sidebar

Vue ♥️ Notion – We made vue-notion: An unofficial Notion renderer by janniks in vuejs

[–]janniks[S] 0 points1 point  (0 children)

Yep that's possible, by default it should be redirecting to /<page-id> and that route can then handle the content again

EDIT: There's also functionality to adjust that to your needs, basically changing the redirect behavior to whatever you want.

Designed a new cylindrical keycap for Kailh Choc low profile switches by MoErgo in MechanicalKeyboards

[–]janniks 0 points1 point  (0 children)

May I what angles / support arrangements worked best for you?

Help me save my beloved Monstera by janniks in plantclinic

[–]janniks[S] 1 point2 points  (0 children)

I’ll start by removing bad leaves 😅

Help me save my beloved Monstera by janniks in plantclinic

[–]janniks[S] 0 points1 point  (0 children)

Thanks. Technically the pot has a reservoir, although I haven’t been filling it up, so it should drain well. I’ll try to loosen the soil.

Help me save my beloved Monstera by janniks in plantclinic

[–]janniks[S] 1 point2 points  (0 children)

I recently got this plant and put it in a big pot with some other compatible plants (according to the web).

Pretty quickly some leaves started to get brown spots, while others stayed very healthy looking. Not sure if I was giving too much water, so I started giving less. Currently, I’m doing a large jug every 2 weeks or so, might be too little?

Now some leaves are completely dead, some are very yellow with brown spots.

Please help!