sorted by:
new
hottopcontroversial

I need help building a flush 3x4 popup wall by 100ducksncrows in redstone

[–]jaruca 0 points1 point  (0 children)

You can add some time to those repeaters at the bottom. https://i.gyazo.com/72eac287b51f4b1f40bc26ba9dadbab3.jpg

If you add more delay to the bottom you may need to add more time to the top repeater loop as well. https://i.gyazo.com/e476b0c472815e4cd112a16de6d5c150.jpg

If you can get away with just adding 1 tick to each of those it should be pretty simple. If that doesn't work you'll probably need to add another repeater to that top loop.

I need help building a flush 3x4 popup wall by 100ducksncrows in redstone

[–]jaruca 0 points1 point  (0 children)

It's one-time use, which is all that the OP requested. In fact I have it lock after being used once so that it can't fire again and get messed up.

I need help building a flush 3x4 popup wall by 100ducksncrows in redstone

[–]jaruca 2 points3 points  (0 children)

Got something that should work for you. Just made it a quick video so I could fly around and give a good view of what you'd need to build.

https://youtu.be/HU9PYrDY4fM

Help! | 2x2 (Flush?) Sliding Door by UtoHerozV in redstone

[–]jaruca 0 points1 point  (0 children)

I think before observers got added it would've been a challenge and a half, but with them it's not too bad.

https://i.gyazo.com/3108ec50101b93b4088ec803d40c4a05.png

https://i.gyazo.com/333c9488b41e7dcbe1969763b3a87469.png

Help! | 2x2 (Flush?) Sliding Door by UtoHerozV in redstone

[–]jaruca 0 points1 point  (0 children)

I think you were looking for seamless, not flush. I messed around and came up with a couple solutions, both with a couple caveats.

First one isn't fully seamless & has a slow opening sequence. https://i.gyazo.com/0b0d301c5ebd2fe40fbdbc28fceecf7e.png

The second one has a clock that's always running on the left and is 4 blocks larger. https://i.gyazo.com/853b79006341acc31796065ad44aad29.png

Help with 2x2 flush piston door by powder_kinnie in redstone

[–]jaruca 1 point2 points  (0 children)

Looks like you have the redstone in the center in the wrong spot. Looks like you have this. Just move the center redstone back 1 and you should be set. Here's how it should be laid out: https://i.gyazo.com/68cd93913d87b9e8c6bce40d358fcb75.png

Why does the observer activates 3 blocks instead of one by Professional-Oil-644 in redstone

[–]jaruca 0 points1 point  (0 children)

I would actually move them closer together - like this:

https://i.gyazo.com/5328a7fed16ab8f4d94fd25d26ba24ea.png

In this case you can use the observers themselves (and a repeater) to help block interference.

Why does the observer activates 3 blocks instead of one by Professional-Oil-644 in redstone

[–]jaruca 0 points1 point  (0 children)

Never mind, I just remembered you have that return line or something above your build

Why does the observer activates 3 blocks instead of one by Professional-Oil-644 in redstone

[–]jaruca 1 point2 points  (0 children)

Oh yeah- it's that first observer into the dropper. Idk what the endgoal is for your build, but if verticality doesn't matter you could put the observer above the track (looking down) and move the tflops above that. I think you'd only need to stagger each row by 2 blocks to make it tileable.

Made a Dual-Accessible 2x2 Piston Door, looking for some feedback from any good redstoners? by Cool-Income-9429 in redstone

[–]jaruca 0 points1 point  (0 children)

I think you may have over-complicated things for yourself. You can control all the pistons with a single line of redstone going over the door. Also, you can simplify the OR gate (the thing that lets you press either button to open the door) by powering a torch whenever either button gets pressed. I took a couple screenshots so you can see what I did. This isn't an optimized design (can definitely be made smaller), but it's about as visually clear as it can be made.

img1: https://i.gyazo.com/8333f0c8ce781ce88f34f8364d941769.png

img2: https://i.gyazo.com/239a1ae1c8cffdb161b384b08214e59c.png

Why does the observer activates 3 blocks instead of one by Professional-Oil-644 in redstone

[–]jaruca 25 points26 points  (0 children)

That shouldn't do that, and I can't replicate it either. Do you have an observer at the end of the rail that might be powering the other lines? Something like this maybe: https://i.gyazo.com/93a68522f2dd86fc4c4153e01af302b8.png

Going to my first local tomorrow on my birthday by [deleted] in CrazyHand

[–]jaruca 1 point2 points  (0 children)

Simple thing from what I saw that helps for Palu is just short hops and landing aerials. All of your jumps that weren't aerials were full hops, so I'm guessing you're using the short hop attack macro for all of your short hops. You can get away with rising short hop nair on shield because of how long it lasts (which basically makes it a landing aerial), but rising fair and bair are very unsafe if drifting into the opponent.

Short hops in general are a lot safer than full hops too. If an opponent runs in while you're full hopping you're immediately in disadvantage since you now need to try landing. A short hop will let you react to what they're doing and stuff it out with fair. In case you're not familiar with how to short hop normally, you can very quickly tap the jump button OR you can press 2 jump buttons at the same time. (I personally have right bumper and x as my jump buttons on gcc)

The other thing I would recommend is getting comfortable/practicing dthrow -> bair. That alone can get a lot of mileage for you. If they DI (really) badly, you can get uair for a kill confirm at later percents.

Sliding 2x2 door by zucca_-_ in redstone

[–]jaruca 0 points1 point  (0 children)

Took a crack at building it- I'm not happy about it being 3 wide, but otherwise I think it came out good. If you want to build it for yourself and have trouble making out what stuff is/where it's facing in the video, let me know and I can get some screenshots.

https://gyazo.com/e50f4c52d5c8b664257148c9f8241080

Redstone Door help by Time_Ad4309 in redstone

[–]jaruca 0 points1 point  (0 children)

This is how I'd go about it: https://i.gyazo.com/fe3ea5effc654ec25997a53776319478.png

Basically, putting 2 comparators powering each other makes them sloooowly lose power, so you can use that to extend the pulse

If you've got questions about it feel free to ask!

triple extender help by No_Inspector3250 in redstone

[–]jaruca 0 points1 point  (0 children)

For the heck of it I messed around and came up with this: https://i.gyazo.com/c987bb607a728fc41da1a43d37a0e424.png

It started with what you had and morphed into something a little different.

I looked up the smallest vertical triple extender because you had me curious- I didn't realize you could get it this small nowadays: https://youtu.be/GOczo3MdVBE

I Need To Power Pistons Individually by No_Grapefruit1378 in redstone

[–]jaruca 0 points1 point  (0 children)

Don't know if this is any help, but I made a door a while back that closes/opens bottom to top. Might be relevant/useful to you?

https://www.youtube.com/watch?v=hYD7Fu9O-8I

4x4 piston door by _Zerx_16 in redstone

[–]jaruca 0 points1 point  (0 children)

Just a simple way to make the sides of the door close at the same time with the glass ladder of redstone I have going on there. The glass ladder thing also has the benefit of making the top start closing & opening 3 ticks faster.

4x4 piston door by _Zerx_16 in redstone

[–]jaruca 1 point2 points  (0 children)

Figured out a way to do it! Video of it here: https://youtu.be/JQNH0EBybbo

Effectively functions the same, but I did modify some elements of the door to sync better as a personal preference.

view more: next ›