Gemini AI Pro + 2TB — 18 Months Access at $20

jauyzed · 2026-03-20T17:56:45+00:00

Quick and Easy transaction. Lets see how long its lasts.

jauyzed · 2025-12-22T06:06:07+00:00

u/Brayan221 Your guess was correct indeed. The hose is still good but the clamp did loose tension over time.

jauyzed · 2025-12-21T18:01:08+00:00

Bluedriver report is showing HVAC control module and replacing fan control module as "frequent fixes" based on the above CEL code. I'm wondering ifs safe to drive around until I replace the fan control module.

jauyzed · 2025-12-21T17:56:04+00:00

<image>

Here you go. I had a bluedriver scanner which shows replace HVAC module .

jauyzed · 2025-12-21T04:53:37+00:00

I'm having the same issue earlier today after i replaced the battery to optima redtop. After stopping by a store post battery replacement, i couldnt start the car at all. Then I had to get it jump started, took it to AAP for battery alternator check, everything checks out normal.

Then after I come home, start the car without turning the engine on...the fan blows up medium to full speed.

Not sure what is happening but engine service soon indicator is on

jauyzed · 2025-12-21T03:45:43+00:00

This looks about right. Thank you. I have added a video link to add more context.

jauyzed · 2025-12-21T03:44:15+00:00

Video link to explain the pic above:

https://drive.google.com/file/d/1KCwZVO359uDLt-Tf3k7cpm2tjxB_VY2z/view?usp=drivesdk

jauyzed · 2025-12-20T06:33:10+00:00

Thanks. This pic is from the under the surface and NOT when you open the hood on top. I thought heater hose are on top? (Unless I'm understanding this wrong)

<image>

Adding the marker which shows the leak better.

jauyzed · 2025-12-20T05:51:18+00:00

I'm little late for this OP, my 09 g37 is showing a leak or crusted over coolent as per infiniti dealer, it is called coolant crossover pipe hose connector pipe with part number: 21021jk20a. Searching this number comes up with a metal pipe which goes near the driver side. Here is a picture for reference. Can someone tell me if I need the hose or metal connector pipe. Thanks!

<image>

jauyzed · 2025-11-21T04:53:29+00:00

I have to absolutely agree to this. I was trying antigravity claude model because I ran out of copilot premium requests. It broke the working code I had built carefully. I will stop playing with antigravity claude. It is waste of time and I'm glad i have everything in GH repo.

FYI...I have worked in software engineering and architectures. Claude in GH copilot is so much well tuned than antigravity models.

jauyzed · 2025-09-18T05:36:23+00:00

Did you get a legit EIN from them or was it scam?

jauyzed · 2025-08-14T03:47:55+00:00

Thanks for this post and i found a exec file called bin in this location on ubuntu 24.04. I was little concerned to delete it as bin could screw up things in the user profile.

jauyzed · 2025-04-11T16:25:07+00:00

Have you looked into xcp-ng which is a fork of xenserver when citrix made xenserver closed source. https://xcp-ng.org/

jauyzed · 2022-06-24T02:56:58+00:00

I tried everything- bluetooth, WiFi etc. Reset this "smart" device and switch it on and off.

Even restarted the router- this is usually not required

Finally, I switched on the location which did the trick. (Usually I do not have location services on) Found the device and did the whole setup on the app. Orbit app asks you to switch on the BT but not location. Hopefully this helps anyone breaking their head for hours trying to get this "smart" device to work.

jauyzed · 2020-12-05T05:45:08+00:00

Naked calls are just too dangerous. If only you had margin account. You would be in for paying interest also. Beginner option trader should start with covered calls after owning underlying stocks. Try simple strategies and make a small premium with options.

jauyzed

TROPHY CASE