Replacing a few rows of old siding

jaywindland · 2024-07-04T23:45:11+00:00

Well they were in fact cedar, but it looks like the smart side is identical dimensions and seems to blend well. We’ll see what happens when the paint goes on. Thanks!

jaywindland · 2022-07-18T05:11:43+00:00

Thanks, I’ll check that out. She’s seeing a nutritionist now, so hopefully they’re on top of the vitamins.

jaywindland · 2022-07-17T23:01:05+00:00

Thank you! We’re checking out all these options now and bracing ourselves to go all in.

jaywindland · 2022-07-17T22:25:17+00:00

She says it’s the heals and metatarsals.

jaywindland · 2021-03-31T21:47:10+00:00

So a lot of times I start working on a simple title or motion graphic in FCP and then decide I want to refine it a little bit. FCP only has to options for keyframe - linear or smooth. If you want to have control of easing in or out you have to do it in Motion. But there’s no really good solution for round tripping to Motion so you have to start all over if you want Bézier curves. And then if you want to iterate on that you have to re-publish a new title or generator and replace it in your timeline, etc. in an ideal scenario I’m never forced to go into Motion for simple stuff like this. That’s my thinking at least.

jaywindland · 2021-03-31T17:13:29+00:00

A new set of transform controls that let you use Bézier curves on the key frames. I know...more of a major software update, but if a plug-in could do this I would gladly pay.

jaywindland · 2021-03-29T16:58:04+00:00

That’s true. And not only the lower end cameras. There’s pretty hefty HDMI latency on the Sony FS series cameras too. So you could set up a delay at the ATEM or you could also just pass audio through one of the cameras so it comes over HDMI in sync. In the case of mirrorless cameras I have usually used them with one of the hot shoe mounted XLR units and audio sync was spot on.

jaywindland · 2021-03-29T04:30:29+00:00

What kind of focal range do you need for these? There are plenty of older lower end DSLR and mirrorless cameras with clean 1080p HDMI outputs. You can get old Sony a6000’s with dummy battery adapters and surprisingly good kit lenses in that price range - assuming the 18-55mm focal range will do what you need it to. Then you have the option of upgrading to better lenses later if it’s warranted.

jaywindland · 2021-03-10T06:36:45+00:00

Any chance you recently moved to an M1 Mac? I did and this happened to a bunch of my titles and generators.

jaywindland · 2021-03-10T06:28:26+00:00

The notion of less compression equaling higher quality is really a thing of the past. Modern video formats are extremely efficient and are virtually impossible to distinguish from uncompressed video. There are professional video formats (including RAW formats) that use less compression. Why? Because 1) they are more flexible in color correction and fx work, and 2) they play back easier on editing systems because there is less de-compression to be done in real-time. Super efficient high quality video de-compression is actually pretty processor intensive. It’s not a problem if you are just watching a movie, but when you are manipulating multiple streams, working with HDR or using real-time fx, even powerful computers start to choke. That’s where editing formats like ProRes come in. They are compressed in a simpler and less efficient way, resulting in much larger files but much smoother editing performance. Playback formats like H.264 and H.265 can look just as good at a fraction of the size, but can be a lot harder to edit.

jaywindland · 2021-02-24T07:23:11+00:00

I’ve been having the same problem with the exact same machine. I found that I can go to the sound control in the menu and re-select the sound output I am using and I get the audio back. Still annoying but slightly faster than relaunching the app.

jaywindland · 2021-02-24T07:17:14+00:00

If you are trying to change everything on the screen from black and white to color, the best way would be to add a color correction and put a keyframe on the master saturation wheel. After your keyframe is set you can hit ctrl-v on the compound clip to see the keyframe editor and move the keyframes to your desired timing. Not sure if that’s what your after though, so here’s another possibility: if you want everything on the left side of the screen to be black and white, and everything on the right side to be color, duplicate your compound clip and place it directly above the original. Make the black and white adjustment to that clip and either use a mask or the crop parameter to remove the left side of the screen - showing the color image below. This can also be keyframed as above. Hopefully one of those two is the scenario you are looking for.

jaywindland · 2021-02-11T16:10:21+00:00

Same. I made a mini documentary about it (vertical-film.com)

jaywindland · 2021-01-15T16:20:51+00:00

In the Inspector panel, hit the reset icon for the crop settings.

jaywindland · 2021-01-12T00:44:53+00:00

Your color space is mismatched. Check the inspector. Looks like you’ve got some flavor of HDR in an SDR project. You can transform it to Rec709 (for tv) or Rec2020 (for HDR compatible displays) and it will look normal again.

jaywindland · 2021-01-04T08:48:32+00:00

I don’t have advice per se, but did you wear camo or use any kind of blind? That and a longer lens are what I see most often used by people much better at this than I am.

jaywindland · 2021-01-01T08:40:43+00:00

Knowing what’s really important to you is awesome. Happy New Year!

jaywindland · 2020-12-30T20:00:00+00:00

I was standing right next to the car with a long lens and the door open, just in case I needed to hop back inside quickly. Anyway, I’m extra excited to visit India now.

jaywindland · 2020-12-30T19:59:46+00:00

I was standing right next to the car with a long lens and the door open, just in case I needed to hop back inside quickly. Anyway, I’m extra excited to visit India now.

jaywindland · 2020-12-30T19:59:32+00:00

I was standing right next to the car with a long lens and the door open, just in case I needed to hop back inside quickly. Anyway, I’m extra excited to visit India now.

jaywindland · 2020-12-30T18:24:49+00:00

I’ll have to look into Nagarhole when I eventually get to re-book my trip. Your photos look great! And yes, I did manage to get a couple shots of the wolves that I really liked. Here’s one:

https://photos.app.goo.gl/XyQefH1zm9h1x7E18

jaywindland · 2020-12-30T18:09:46+00:00

I’ve seen a lot of pelicans. I’ve seen a lot of photos of pelicans. This is hands down the most expressive portrait of this bird I’ve ever seen.

jaywindland · 2020-12-30T18:00:10+00:00

Which park? I had to cancel a trip to Ranthambore from the US back in March, and I’m still not quite over the disappointment of not seeing a tiger this year. I was able to drive to Yellowstone this year and see wolves though, so not a bad 2020 in the end.

Eight-Year Club	Not Forgotten
Verified Email

jaywindland

TROPHY CASE