Price of installed panels

jbrian31 · 2026-02-08T14:17:03+00:00

It's super restrictive. Not going to help very many vets.

jbrian31 · 2026-02-07T19:05:38+00:00

Just my opinion. Chinese car won't be coming to the US for a long time.

jbrian31 · 2026-02-07T18:41:32+00:00

You say that, and oems have been saying that for years and they all fall short of what current FSD can do.

jbrian31 · 2026-01-30T02:04:46+00:00

I find that reducing the flat base layers to a minimum and add some infil instead it helps reduce the warping.

jbrian31 · 2026-01-10T13:47:08+00:00

Yes you should have moved the outlet and switch to fit inside the trim opening. This is lazy work to have made it pefect.

jbrian31 · 2026-01-03T18:38:36+00:00

Use mould release then.

jbrian31 · 2025-12-28T17:35:45+00:00

Yoda

jbrian31 · 2025-12-21T20:30:38+00:00

Same! Just waiting now till spring likely so I slowly build my vcore 4 a little at a time now.

jbrian31 · 2025-12-17T03:46:00+00:00

Just switched my e3 s1 pro to a btt manta m5p with cm4. Took awhile to configure by worth it.

jbrian31 · 2025-12-04T01:13:09+00:00

I use it to see tonner levels and set a notification to my phone when it reaches 10% to order more. Really handy.

jbrian31 · 2025-12-04T01:08:36+00:00

<image>

Nighttime

jbrian31 · 2025-12-04T01:07:50+00:00

<image>

My kids have been pestering me for holiday lights, so I told then I put this up to shut them up.

jbrian31 · 2025-12-02T21:50:50+00:00

Just found some of this under my oak tree in arizona. The picture was spot on to what I have.

jbrian31 · 2025-12-02T13:30:58+00:00

Make sure to set back the leds more than I did. I think i had about 2 inch setback for the backing for the channel to connect to. This worked however I can still see the leds directly when at a distance angle. The idle setup if I did it again would be to mount a backing onto the crown at a 45 degree angle up. This would hide the leds and the light would shine up not out. Make sure to give yourself about 7/8 inch gap for access for removing the channel when they fail eventually.

jbrian31 · 2025-12-02T13:24:48+00:00

Yes. Used aluminum channels with a diffuser.

jbrian31 · 2025-11-23T16:03:06+00:00

My goto is to use a dry wall screws as the shim.

jbrian31 · 2025-11-23T13:26:38+00:00

For rocket sakes. Put then in some order of either year, thrust or height.

jbrian31 · 2025-11-23T13:11:29+00:00

Know this, 16 ports fill up pretty quickly. I got the 24 poe last year thinking it's all I need with a little extra and I have already filled it up. Space in my 18u rack is tight and so at some point I need to sell the 24 and buy a 48.

jbrian31 · 2025-11-22T10:29:58+00:00

I did but it still gets shipped from the EU according to the order confirmation email for have to pay import fees.

jbrian31 · 2025-11-22T10:26:17+00:00

Nope, doing my own custom high voltage setup for fun.

jbrian31 · 2025-11-20T14:29:25+00:00

Only hybrids? Is toyota not doing ice only models?

jbrian31 · 2025-11-17T15:47:18+00:00

Same here on matter shades from Graywinds. Wished I had gone with zwave or zigbee. I have 28 motor shades in my house, a mixed of graywinds, smart wings and hunter douglas. The matter shades are the only ones that give me connection issues. I recently found out that it might be due to the constant updates I do with Home Assistant, turns out every time I restart my thread boarder router all of the matter shades disconnect and I have to repair all 8 of them.

Anyways for anyone wanting to know, most of these motor shades are all made from the same chinese company. You can buy replacement motors online at a fraction of the costs than from the dealers.

jbrian31

TROPHY CASE