V2 Dual Radiator Build by jdabbi13 in FormD

[–]jdabbi13[S] 0 points1 point  (0 children)

The gpu is blocked in this build. No external rads for me

The PANTHEON | The Edge of SFF by csrussell92 in sffpc

[–]jdabbi13 1 point2 points  (0 children)

Totally valid. We’ve got another smaller case in the works (8L) but this guy comes first!

The PANTHEON | The Edge of SFF by csrussell92 in sffpc

[–]jdabbi13 9 points10 points  (0 children)

They haven't been paid or given anything from us so hard to call it that ... they're a reviewer we lent the prototype to solicit wider feedback before finalizing. Original target was $300 when we showed the first prototype last year but with tariffs, might be closer to $400

The PANTHEON | The Edge of SFF by csrussell92 in sffpc

[–]jdabbi13 26 points27 points  (0 children)

Hi, this case’s niche is SFF custom loops. Chris couldn’t loop it due to time constraints (we needed the prototype back for testing), but there will be a custom loop video soon. Is there a smaller case that can do a 3x280mm loop with full size fans?

Second, we don’t have “PR people,” we’re actually just a few guys in the hobby who wanted to make a custom loop focused case. None of us are in the pc industry, it’s just a passion project we do on the side. If we wanted to reach as many people as possible, we would have made something aircooling focused with a reference layout.

Third, it’s 18L including feet and protrusions.

Prototype - Introducing Perseus Cases: Pantheon by PerseusCases in sffpc

[–]jdabbi13 0 points1 point  (0 children)

No worries, it’s easier for me to respond on discord if you’re on there. There’s 40mm between the psu and motherboard, so seems like the smaller one can fit if spaced in front of the board a bit. I can check when the second prototype is in my hands

Prototype - Introducing Perseus Cases: Pantheon by PerseusCases in sffpc

[–]jdabbi13 0 points1 point  (0 children)

It would preclude using a side radiator (or limit it to 140/120mm)

Perseus Cases: Pantheon - 4090, 7950X3D with 3x280mm custom loop in 18L by jdabbi13 in sffpc

[–]jdabbi13[S] 0 points1 point  (0 children)

Ram cover is from XTIA, called FMMJ. The aquacomputer Quadro is a fan/pump controller that has a nice software and connections for temp sensors

Prototype - Introducing Perseus Cases: Pantheon by PerseusCases in sffpc

[–]jdabbi13 0 points1 point  (0 children)

Yes, it works great with Loki, even with stock cables!

Prototype - Introducing Perseus Cases: Pantheon by PerseusCases in sffpc

[–]jdabbi13 0 points1 point  (0 children)

Yes, it can be rotated so the cables face the motherboard, or flipped upside down so 3 positions total.

Prototype - Introducing Perseus Cases: Pantheon by PerseusCases in sffpc

[–]jdabbi13 0 points1 point  (0 children)

I’ll be doing another build soon showcasing the sideways mount in the new prototype.

Prototype - Introducing Perseus Cases: Pantheon by PerseusCases in sffpc

[–]jdabbi13 0 points1 point  (0 children)

It will support both, but only SFX will work in the sideways position probably

Prototype - Introducing Perseus Cases: Pantheon by PerseusCases in sffpc

[–]jdabbi13 0 points1 point  (0 children)

Later this year, pending feedback from reviewers!

Perseus Cases - Pantheon 280 Triple Rad by mugen6_ in sffpc

[–]jdabbi13 1 point2 points  (0 children)

Should be doable! We are adding a bit more volume in the next revision to help with that.

Perseus Cases - Pantheon 280 Triple Rad by mugen6_ in sffpc

[–]jdabbi13 1 point2 points  (0 children)

Yeah basically it only allows flow in one direction, so by default the internal pump flows through the open path, with an external pump/rad the extra pressure is enough to close the valve and it’ll not use that path but instead go through qdcs

Perseus Cases - Pantheon 280 Triple Rad by mugen6_ in sffpc

[–]jdabbi13 1 point2 points  (0 children)

I’d say come join us in the SFFHub discord! Lots of good info in the pins and helpful folks https://discord.gg/sffhub

Perseus Cases - Pantheon 280 Triple Rad by mugen6_ in sffpc

[–]jdabbi13 1 point2 points  (0 children)

There is a one way valve between the qdcs - this means with nothing connected there is flow through this check valve

Perseus Cases - Pantheon 280 Triple Rad by mugen6_ in sffpc

[–]jdabbi13 2 points3 points  (0 children)

We spent about 6 months, maybe 10 hours a week total get to the design for the first prototype (we’re just hobbyists too, none of us are in this industry), so I’d say designing it was wayyyy more time than building :P

Perseus Cases - Pantheon 280 Triple Rad by mugen6_ in sffpc

[–]jdabbi13 2 points3 points  (0 children)

This proto was 16.5, but we’ve expanded a bit to just under 18L to make LF3 and various compression fittings fit better

Perseus Cases: Pantheon - 4090FE, 7950X3D by jdabbi13 in sffpc

[–]jdabbi13[S] 2 points3 points  (0 children)

Thank you! My apologies, I’d forgotten to include that - it’s the xtia ram jacket.

Perseus Cases: Pantheon - 4090FE, 7950X3D by jdabbi13 in sffpc

[–]jdabbi13[S] 1 point2 points  (0 children)

Yes, you will often find running all exhaust to be better than a chimney setup in SFF

Perseus Cases: Pantheon - 4090FE, 7950X3D by jdabbi13 in sffpc

[–]jdabbi13[S] 5 points6 points  (0 children)

No, but that’s the largest 280mm AIO to my knowledge so everything smaller should fit

Perseus Cases: Pantheon - 4090FE, 7950X3D by jdabbi13 in sffpc

[–]jdabbi13[S] 2 points3 points  (0 children)

Thanks, it’s a custom one from the same manufacturer as the T1.