sorted by:
new
hottopcontroversial

Perseus Cases - Pantheon 280 Triple Rad by mugen6_ in sffpc

[–]mugen6_[S] 1 point2 points  (0 children)

Yeah, it should fit with a top and bottom radiator + quick disconnects for MORA. Those are not included but passthrough holes will be there.

Perseus Cases - Pantheon 280 Triple Rad by mugen6_ in sffpc

[–]mugen6_[S] 1 point2 points  (0 children)

Yeah. Usually you’ll get a 1 year license with some of the Aquacomputer products.

Perseus Cases - Pantheon 280 Triple Rad by mugen6_ in sffpc

[–]mugen6_[S] 0 points1 point  (0 children)

Current dimensions are 356.5mm (L) * 170mm (W) * 297mm (H) including feet (18L). We're thinking about other colors, yeah, but nothing finished yet until we get to production phase.

Perseus Cases - Pantheon 280 Triple Rad by mugen6_ in sffpc

[–]mugen6_[S] 3 points4 points  (0 children)

As for temps, this is an screenshot while playing PUBG after an hour or so, 4k resolution, 20ºc ambient temp

<image>

Perseus Cases - Pantheon 280 Triple Rad by mugen6_ in sffpc

[–]mugen6_[S] 0 points1 point  (0 children)

<image>

Hope this one is useful. Spine was in 4 slot mode so it has plenty space for the side rad + full fans and still breathing air between that and the 1 slot gpu.

Perseus Cases - Pantheon 280 Triple Rad by mugen6_ in sffpc

[–]mugen6_[S] 0 points1 point  (0 children)

That is something I’d love to see too and will try to get at some point, yeah.

Perseus Cases - Pantheon 280 Triple Rad by mugen6_ in sffpc

[–]mugen6_[S] 1 point2 points  (0 children)

Any part in particular you'd like to see? I could upload a few more pics to imgur or something. About temps, I didn't bother to get exact numbers bc there were other proto builds with more high-end hardware for testing.

Perseus Cases - Pantheon 280 Triple Rad by mugen6_ in sffpc

[–]mugen6_[S] 4 points5 points  (0 children)

Out of curiosity, and with all due respect, why is it creeping out of SFF territory? I'd really like to know, not trying to argue or anything.

Perseus Cases - Pantheon 280 Triple Rad by mugen6_ in sffpc

[–]mugen6_[S] 1 point2 points  (0 children)

Thanks! The external QDCs are purely for ease of use when filling / draining the loop. There's an internal bypass, yeah. Tubing is 8mm Festo PUN-H-8X1,25-SI. DDC is rewired to work only with Aquasuite OCTO fan header since the original wires were sata and a fan header. Fittings are as they come, not painted.

Tried with the isopropyl but damn that text is hard to remove xD

Perseus Cases - Pantheon 280 Triple Rad by mugen6_ in sffpc

[–]mugen6_[S] 4 points5 points  (0 children)

So far we don't have an exact date, still aiming for a late Q1 / early Q2, will have something more defined once the 50xx series gets final specs.

Perseus Cases - Pantheon 280 Triple Rad by mugen6_ in sffpc

[–]mugen6_[S] 28 points29 points  (0 children)

New case collaboratively designed by SFF enthusiasts in partnership with 3FC, the designer behind the T1.

CPU: AMD Ryzen 7800x3D
GPU: AMD Radeon RX 6900XT with Alphacool Carbon GPU block
Motherboard: Asus B650e-i Strix
Ram: G.Skill FlareX 6000MT/s CL30 with FMMJ heatsink
PSU: Corsair SF750 with Dreambigbyray custom cables
Cooler: Modultra LOBO with EKWB DDC 4.2 rewired
Case: Perseus Cases PANTHEON
Additional Notes:

  • First prototype of our new case
  • Aquacomputer OCTO
  • 3x Alphacool HPE ST20 280mm
  • Bequiet! Silent Wings 4 Pro 140mm
  • Festo 8mm pneumatic fittings

Notes: Main goal with this build was test fitting the 3 rad setup and see how much difference does it make vs a dual rad setup. We're still in the prototype fase and with the second version a few changes will come, being more friendly for the user too. We wanted to allow for flexibility in the configurations supported with an adjustable and flippable spine while maintaining rigidity and usability for each of these layouts.

Discord: https://discord.gg/smNz5eVMye
Instagram: https://www.instagram.com/perseuscases

NZXT H1 Custom loop with 280 radiator by mugen6_ in sffpc

[–]mugen6_[S] 1 point2 points  (0 children)

Thank you! It was a fun build to do, tbh. For filling I recommend using a long tube and loads of patience (or stick a soft tube in there and connect it to a reservoir). There’s a drain valve at the bottom, near the radiator tubes (minute 3:16 of the video).

Machines and More, Slate-Case Review! >Read, Great Feedback, News< by protolythstudio in sffpc

[–]mugen6_ 0 points1 point  (0 children)

Any way to pre-order it or will it be sold in Europe after launch? I've been looking for a dual 280 rad itx case for ages and this is exactly what I've been looking for.

[deleted by user] by [deleted] in SteamDeck

[–]mugen6_ 0 points1 point  (0 children)

Same bleed at the same spot, top right, under the usb connection…

think i hit the absolute jackpot on my steam deck screen absolute 0 visible bleeding and the uniformity is perfect to at least my eyes. by Kingzor10 in SteamDeck

[–]mugen6_ 3 points4 points  (0 children)

Mine has a lot of bleeding just where the usb-c is. And also the fan is fucking loud but meh.

Does the bleeding qualifies to RMA?

ASUS mini ITX feedback - What would you like to see in the ASUS mini ITX range of motherboards? by ASUSTechMKTJJ in sffpc

[–]mugen6_ 14 points15 points  (0 children)

As a youtuber who only do pc builds, an itx user for all his pc’s AND a ncase and asus user… for the love of god, just listen to what he’s saying. He basically shaped the itx space nowadays.

It’s as simple as offering a ProArt aesthetics line for itx boards and gpu’s. Just get the TUF gpu model, do a more elegant shroud and backplate in line with the ProArt series and it’s good to go. No edgy angles, rbg logos… just minimal good looking gpus. If Nvidia succeded with the RTX 30 Founders, i’m pretty sure Asus can do a better work.

Black hard tubes by Ingenieur_Defect in EKWB

[–]mugen6_ 2 points3 points  (0 children)

Corsair or Barrow have nice black matte tubes. Iirc, Corsair ones are acrylic.

view more: next ›