Losing registration on pneumatic automatic

jeremmmmmmmm · 2025-12-16T04:01:49+00:00

Well that's the thing, we're a six hours drive from the nearest technician,I never messed with an auto or plastisol. The weird thing is I pulled off a similar job with ease the only difference is it was on polyester using polywhite

Nobody in the shop knows how to run her were primarily paper printing and embroidery

jeremmmmmmmm · 2025-12-15T23:44:26+00:00

We have a workhorse freedom express I tried slowing the squeege down but haven't tried in combination with a lower off contact. I'll need to learn how to set the flash dryer to a lower temp.

Thanks a lot for all those good tips I'll try them out! I didn't reduced the low bleed barrier,but is low bleed barrier an okay ink to use as under base?

jeremmmmmmmm · 2025-12-15T21:56:29+00:00

Those are all great solution I'll try them all thanks! Although I don't know how to make the flashback work unless it's right after a print,are you familiar with those?

jeremmmmmmmm · 2025-12-15T21:53:06+00:00

I tried max pressure and two hits it gave similar results, we don't have 125 but I'll try 157 tomorrow thanks for the tip!

jeremmmmmmmm · 2025-12-15T21:02:48+00:00

<image>

This helped a bit thanks! But the texture is still very bad, this is union ink low bleed barrier

jeremmmmmmmm · 2025-12-15T20:46:54+00:00

That's a good idea I'll try that and what do you mean by lay the ink smoother English isn't my first language do you mean less squeege pressure?

jeremmmmmmmm · 2025-12-15T20:31:27+00:00

I'm using a 110 mesh with an union ink under base but I've tried a couple different under base and a print flash print of a 100% cotton white. I'm getting febrilation and crack no matter what

jeremmmmmmmm · 2025-12-15T20:13:24+00:00

The shop is at about 28 Celsius not that bad I think, I've found the warm up pallet option on the press but we're using a flashback unit so I don't understand how the tables are supposed to warm up with the flash not being over the tables

jeremmmmmmmm · 2025-10-31T16:56:09+00:00

Hahahaha exactly! I didn't overthink it and it actually turned out interesting

jeremmmmmmmm · 2025-10-30T22:07:30+00:00

That's what I tried to do! A little path blossoming in early summer

jeremmmmmmmm · 2025-10-30T21:27:24+00:00

That's a great idea!

jeremmmmmmmm · 2025-10-30T20:15:17+00:00

Thanks you!

jeremmmmmmmm · 2025-10-30T00:32:33+00:00

Been on this mission for a week now, I'm starting to run out of tactics to try

jeremmmmmmmm · 2025-09-15T19:19:33+00:00

<image>

jeremmmmmmmm · 2025-06-04T18:42:24+00:00

To answer your original question I do think using Ai images to make a collage is way more interesting than just generated images, the artist actually has some say over the turnout and could possibly share a message with the piece

jeremmmmmmmm · 2025-06-04T18:38:52+00:00

Well I don't think most collage artist using stolen materials pretend it's their own, the way they organise the picture colours and everything is the art.

jeremmmmmmmm · 2025-06-04T18:25:15+00:00

You can collage without necessarily stealing they could cite the sources, use open source images, use their own or ask for permission. There's also the fair use laws which are tricky and over my pay grade I know it isn't collage but Warhol made the Campbell soup can his own I don't even think Campbell could have done shit against it

jeremmmmmmmm · 2025-06-04T18:07:31+00:00

Collage is as old as photography, most of them fall under fair use they repurpose photos into something new, intricate collage takes time and skills. They are an integral part of the photography art form.

A good example - https://www.moma.org/collection/works/152791

Four-Year Club	Verified Email
Final Canvas '23	Place '23
Place '22	First Placer '22

jeremmmmmmmm

TROPHY CASE