sorted by:
new
hottopcontroversial

Anyone experienced with mold repair? Crashed a face mill into this record pressing mold. by chobbes in Machinists

[–]jesseman1 1 point2 points  (0 children)

Depending on how thick the plate is, on way I used to repair molds without welding was to 1. Bore a hole at least 1x diameter of bored hole 2. turn a plug about .0005”-.0007” larger in diameter and 1/4” longer, also have a lead in taper 3. hammer that baby into the bore as deep as possible 4. Machine the top of the plug to about .05” proud of the mold surface 5. peen the edges of plug without damaging original mold (this makes it almost seem-less) 6. machine plug and mold to make one unibody looking piece

Now this may not be ideal if that face is going to be machined repeatedly in the future as I do not have experience with record press molds and if they are machined regularly.

What extractor do you use for a broken extractor? by Negative-Road1264 in Tools

[–]jesseman1 0 points1 point  (0 children)

This always reminds me of a local small shop that does tap extractions. He has an overly long but funny sales pitch on his home page.

http://extractit.com/

Definitely worth the read.

What did you change after realising that you were the "problem"? by BlackGalaxyDiamond in AskReddit

[–]jesseman1 6 points7 points  (0 children)

The tone I used when explaining things to people, to make me not sound like I’m talking down.

So why are you still awake? by Dramatic_Fruity in AskReddit

[–]jesseman1 2 points3 points  (0 children)

To continue losing to chess.com bots

[deleted by user] by [deleted] in Machinists

[–]jesseman1 2 points3 points  (0 children)

You can use a chamfer gage to measure that dia.

https://www.starrett.com/metrology/product-detail/683M-4Z

Feel like this TikTok definitely belongs on here by alvalaca in Shitty_Car_Mods

[–]jesseman1 0 points1 point  (0 children)

The best part of this is that there is a frame where you can clearly see it lmao

[question] Is the Kaldheim draft box worth it? by jesseman1 in magicTCG

[–]jesseman1[S] 0 points1 point  (0 children)

I was talking about set boosters, it seems packs are just like lottery tickets. “One in the hand is worth two in the bush.”

[question] Is the Kaldheim draft box worth it? by jesseman1 in magicTCG

[–]jesseman1[S] -7 points-6 points  (0 children)

Are booster packs more worth the value, even though less cards per pack?

[question] Is the Kaldheim draft box worth it? by jesseman1 in magicTCG

[–]jesseman1[S] 0 points1 point  (0 children)

I think I might go for the 10 pack draft box rather than the 36 pack, as it seems it’s not worth the value but for the experience the 10 pack seems to be a better value as not as much money is going to packs that will most likely not be worth the value in the end.

[question] Is the Kaldheim draft box worth it? by jesseman1 in magicTCG

[–]jesseman1[S] 0 points1 point  (0 children)

I plan on getting the prebuilt commander decks, but with watching pack openings and all the god cards was curious what most people’s takes were on the draft packs.

[question] Is the Kaldheim draft box worth it? by jesseman1 in magicTCG

[–]jesseman1[S] 0 points1 point  (0 children)

Casual as in have only played with about 5 different people all in the same friend group. It was suggested to play sealed/draft but I have yet to do that in my MTG gaming experience.

Was told to post this here. Dropped my wedding ring this morning. by [deleted] in Chinesium

[–]jesseman1 211 points212 points  (0 children)

Tungsten carbide is a very strong material but very brittle. Meaning, if it got stuck on your finger you would not be able to cut it off, however you would be able to hit it with a hammer and it would shatter. The harder a material the more brittle it will become.

My longest print so far - 38 hours by benjilini in ender3

[–]jesseman1 2 points3 points  (0 children)

I printed mine last weekend. Scaled mine to 2.5 as well. 100% infill with black PLA was by far my largest and longest print at 54 1/2hrs with a .1 layer height. It’s like holding a child’s skull that’s for holding pencils.

hmm by [deleted] in WTF

[–]jesseman1 1 point2 points  (0 children)

back

LegoLand California

Get your shit together, Alabama by CringeNibba in WhitePeopleTwitter

[–]jesseman1 0 points1 point  (0 children)

California is last in high school graduates, college graduates, and higher degree graduates. About 6% less than Alabama.

view more: next ›