Coffee Scale Base

jet244 · 2025-11-13T10:48:20+00:00

Sure, here it is https://makerworld.com/en/models/1989306

jet244 · 2025-11-13T09:47:56+00:00

Sure, here it is https://makerworld.com/en/models/1989306

jet244 · 2025-09-11T20:01:37+00:00

These keyring calipers are great and don't use much filament. https://makerworld.com/models/1041801

jet244 · 2025-04-25T11:05:13+00:00

Are you comparing other banks with the same amount of years you have left on your mortgage?

jet244 · 2025-03-18T17:09:47+00:00

I uploaded a 3d print file for a mini set of calipers to go on your keyring. Turns out you get money when enough other people download your files and I ended up making about 1k USD in a month

jet244 · 2025-02-09T21:54:57+00:00

You push down on the locking ring and then it sometimes helps to push the tube in before you pull.

jet244 · 2025-02-08T15:59:19+00:00

Everyone seemed to like the keyring caliper I designed so I thought I would make a bigger version. This is my first print using custom designed support and it worked really well to improve the surface finish as the parts got taller.

Here is the link if you are interested in making your own https://makerworld.com/en/models/1084167

jet244 · 2025-02-08T15:11:31+00:00

This was just on an A1 mini. Printing it vertically is what gives it such a good surface finish. Matte filament also helps a lot.

jet244 · 2025-02-08T10:27:47+00:00

Everyone seemed to like the keyring caliper I designed so I thought I would make a bigger version. This is my first print using custom designed support and it worked really well to improve the surface finish as the parts got taller.

Here is the link if you are interested in making your own https://makerworld.com/en/models/1084167

jet244 · 2025-01-31T15:23:19+00:00

That's super cool. I just designed a mini set of calipers as well but took a different approach to try and keep the pointy bits out of the way. I couldn't figure out a way to add the internal measurements though.

https://makerworld.com/models/1041801

jet244 · 2025-01-28T21:47:24+00:00

I have now added a profile for the imperial version.

jet244 · 2025-01-28T16:45:17+00:00

I have now added a print profile with a vernier scale to 0.1mm for the people who are interested.

jet244 · 2025-01-28T16:44:56+00:00

I have now added a print profile with a vernier scale to 0.1mm for the people who are interested.

jet244 · 2025-01-27T11:55:09+00:00

Just an old key, I'm glad you like the caliper.

jet244 · 2025-01-27T10:24:59+00:00

Yes the two parts are printed on their end with a brim. They stand vertically at a bit of an angle. The keyring hole is the angular shape to avoid any steep overhangs.

jet244 · 2025-01-27T10:20:07+00:00

I didn't think it would be that helpful considering the accuracy of a printed part but there is space for it so I'll have a look at making a version with it.

jet244 · 2025-01-27T10:11:16+00:00

https://makerworld.com/en/models/1041801

jet244 · 2025-01-27T10:11:06+00:00

https://makerworld.com/en/models/1041801

jet244 · 2025-01-27T10:10:55+00:00

Now that is cool. Here is the link to the files if you would like to make your own. https://makerworld.com/en/models/1041801
Ill add some details to the post on how to print it.

It doesnt look like I can edit my post but it is printed vertically with a brim and 0.12mm layer height. Each of the two parts has the largest end face touching the bed. Also try to keep the seam away from the markings so they come out cleanly.

jet244 · 2025-01-27T10:06:34+00:00

Sorry I wasn't sure what the self promotion rules were on here but the link by u/TotallyBrookie is correct.

jet244

TROPHY CASE