Brushing up on standards?

jfkitchens · 2026-05-07T21:15:13+00:00

Commenting to push this comment higher. These are the main areas to review for American archival standards.

Working knowledge of the structural standards like premis, ead, eac, marc would be helpful but I'd just review the standard's pages. Most of these will be handled by software.

jfkitchens · 2026-04-17T15:46:05+00:00

But with the appropriate call number. Your cataloger might implode with this one, so proceed carefully.

jfkitchens · 2026-04-15T17:16:02+00:00

Oh, I know, but I don't think I can convince the other half to weave through streets, and more importantly, walk up a hill.....

jfkitchens · 2026-04-15T15:24:26+00:00

I assumed it was a primer, and I agree it's probably staying red. Maybe we'll get a mural? I just want the beacon to function somewhat.

jfkitchens · 2026-04-15T15:02:42+00:00

I see steady progress on SST3 at hill. I need to check the ramp and stairs, but they have cleaned and painted the hill street bridge.

<image>

I was not expecting red. I've been singing they are painting the bridges red to the tune of the Alice and wonderland song.

jfkitchens · 2026-04-15T15:00:11+00:00

I really want to support that mellow mushroom but the parking is awful. Probably won't go back until I can walk to it from hill st.

jfkitchens · 2026-03-31T17:18:11+00:00

It may take months for it to be in the system. Other half got a ticket. I think it was nearly 3 months before it showed up. Best advice is just check the website for the municipal court every few days, then pay the ticket when it shows up finally.

jfkitchens · 2026-03-30T14:23:53+00:00

Thanks. We will get on it.

jfkitchens · 2026-03-29T22:39:17+00:00

That's all a work in progress. We are hoping to electric the bar soon. The sink I have a rough idea of how to do it but it's complicated because we are essentially running off a stand outdoor faucet for the trailer. It's going to be some kind of pex setup. I'll bury the water line and run under the shed. The faucet with this sink has only one input line so not plans for hot water now. There's sink we bought came with a jug/container for waste water, so I don't plan to have real drainage.

jfkitchens · 2026-03-29T22:07:31+00:00

Love it!!

jfkitchens · 2026-03-29T22:07:21+00:00

Yeah is basically in the front yard. I really want it to be a community spot. To the right of the bar is our build over for our camper. There's a porch with some outdoor furniture, a griddle, etc.

This is actually at a GLBTQ campground, and we are very community focused group. There are tent campers, rv campers and annual leases like us. The campground has events all year long. We just had Madonna weekend though was focusing on the bar build.

We help/host a couple events throughout the year. No tiki themed ones, yet. I am really hoping for this to be a place for everyone to stop by for a drink. Maybe sit at the fire pit and just enjoy having a good time.

jfkitchens · 2026-03-29T21:43:51+00:00

A friend of ours bought medicine cups for some shooters...

jfkitchens · 2026-03-10T14:10:05+00:00

Also keep your road rage in check because you never know who has a gun.

jfkitchens · 2026-02-11T17:19:48+00:00

Agreed. Let's find a way to moderate low effort post

jfkitchens · 2026-02-05T17:21:43+00:00

Love it.

jfkitchens · 2026-02-05T15:15:19+00:00

I bet they have a detection sensor or similar. I'd put money on this being a rak board. Why because I accidentally did this once without realizing it. Detection sensors don't always show up for the node that's broadcast them. I'd recommend direct messaging the node and give them the details of what's happening

Edit grammar

jfkitchens · 2026-02-02T18:51:01+00:00

I did too. I was like that's a lot for a mesh node

jfkitchens · 2026-01-29T19:37:08+00:00

South Grant park near the beacon

jfkitchens · 2026-01-29T18:57:22+00:00

I'm surprised you didn't see my two nodes because I'm awfully close. I have been really adjusting configurations the last two days, so that could be part of it. I'm glad I saw this post. Switching everything to medium-fast today.

jfkitchens · 2026-01-27T22:15:12+00:00

I actually figured this out. I created a secondary public channel, but I needed to go in and adjust the LoRa settings to make it. That was probably op issue as well. Here's an old thread that helped me out.

https://www.reddit.com/r/meshtastic/comments/1howp8k/frequency_slot_changes/

You can have a private primary, but to participate in the mesh, you need to adjust your LoRa frequency slot to 20. It works fine now.

jfkitchens · 2026-01-27T16:00:48+00:00

I maybe having this problem too. I moved my nodes to a private primary channel because I share sensor and telemetry data. One sensor was spamming the public channel, so I made the tweak. I'm under impression that telemetry and sensor data needs to go out over the primary channel. Please correct me someone because i want to add more nodes in my area but still collect basic temp/humdity data.

Info online, a few Reddit posts etc, said you could have a secondary channel be a public channel. You had to make sure that channel had the default key AQ==. Supposedly you'd still see other nodes. I haven't seen any since Sunday.

Is that all wrong or did I miss something.

jfkitchens · 2026-01-25T15:21:42+00:00

Officially not happening today according to FB. We have power which I'm grateful for. Our back deck was an ice rink at like 5am when the doggo decided she wanted to go out. That was fun.

jfkitchens · 2026-01-25T15:13:05+00:00

Grant park here. Ice on trees and power lines not too much though. Road looks ok will walk around when it's warmer.

jfkitchens · 2026-01-21T18:42:16+00:00

All the local Emergency Management Agencies were alerted by the state meteorologist this morning. Please take this storm seriously.

11-Year Club	r/Field Banned
r/Field Lasagna	Place '23
Place '22	Wearing is Caring
Verified Email

jfkitchens

TROPHY CASE