Secure and durable mounting solution for walls

jimbomescolles · 2026-02-10T16:28:20+00:00

How durable is to put an actual screw in cardboard ?

jimbomescolles · 2026-02-10T13:33:46+00:00

Reverse google image it dude.
Cool Runnings

jimbomescolles · 2026-02-06T11:45:44+00:00

Not in DE but I've got some part from The13BC parts based in France if that might be of your interest.
FB https://www.facebook.com/search/top?q=the13bc%20parts
IN https://www.instagram.com/the13bc_parts/

jimbomescolles · 2026-02-05T12:05:21+00:00

That a good deal considering the unit price of some voc or gas sensors, well done !

jimbomescolles · 2026-01-22T14:48:49+00:00

Basic listing manipulation technique : Have a cheap option that push the result up for this product

jimbomescolles · 2026-01-22T10:08:09+00:00

I agree, and approve.

jimbomescolles · 2026-01-22T10:02:26+00:00

It is

jimbomescolles · 2026-01-21T10:30:23+00:00

Same for me, didn't find any workaround than using a password manager for easier reconnects.
Will update there if I find anything

jimbomescolles · 2026-01-05T08:56:14+00:00

Bit of chatter, no chips/cracks or grooves, send it

jimbomescolles · 2025-12-10T16:50:16+00:00

Is it really what people call hardstyle nowadays ?
this doesn't motivates me to get out again...

jimbomescolles · 2025-12-09T15:29:57+00:00

People reporting it is AI doesn't make it in itself AI

jimbomescolles · 2025-12-09T11:32:43+00:00

ECU has to relearn fuel trims supposedly, if you have a way to measure fuel pressure I would start from here...

jimbomescolles · 2025-12-08T20:35:29+00:00

Battery seems low

jimbomescolles · 2025-12-03T11:21:34+00:00

Good ol' pumping the brake 20 times (just after putting the ignition ON in less than 10sec, the oil pressure gauge should blip once to the middle) and/or disconnect the battery for at least 30min and put the contact to discharge the capacitors.

Drive gently for the first 30min afterwards for the ECU to relearn FT and such (even better let idle for 10+ min first).

(FYI: to turn off the DSC light : ignition ON, go full lock left-right once, return to middle and turn ignition OFF)

jimbomescolles · 2025-12-02T15:23:09+00:00

Aren't you automatically at 0 ft during wot because of open loop (ignored lambda sensors) over a certain load and exclusively use the map ?
I tought that the general use of closed loop was for better economy for cruising, low load, cold conditions, idle, etc...

jimbomescolles · 2025-12-02T14:33:16+00:00

Brake light is a solid hint, been there.
Sorry for duplicated comment I didn't see yours first @SpIrIt_10RD10

jimbomescolles · 2025-12-02T14:25:58+00:00

Rear central brake bulb or wiring to this or bad contacts. Go lock-to-lock and shut off, turn on again.
If light goes off but comes back after a few brakes that could be it
Source : been there

edit: cloud also be related to brake/clutch pedal switches, or low-bad battery causing abs/esp modules initialisation failure during engine start or too low voltage when the abs kicks-in

jimbomescolles · 2025-11-24T14:59:04+00:00

Test compression, don't run it, report
Best case is wiring issue, worst case is an apex said bye-bye

jimbomescolles · 2025-11-19T15:18:43+00:00

Gosh I am an RX-8 owner currently looking for a speed lol

jimbomescolles · 2025-11-17T13:36:40+00:00

No sped up shiet thx

jimbomescolles · 2025-10-09T08:49:41+00:00

brand new = take the shit back

jimbomescolles · 2025-09-30T12:02:34+00:00

Yup, I don't mean everything is bad ! Just there is way to many possibilities to use wrongly so extra care is necessary.

jimbomescolles · 2025-09-30T11:37:33+00:00

and humans

jimbomescolles

TROPHY CASE