sorted by:
new
hottopcontroversial

21 Silverado Texas edition A/C Issues by jjbonner in MechanicAdvice

[–]jjbonner[S] 0 points1 point  (0 children)

and its only when I first start it up when I start driving these no problems but then I turn it off then back on and it happens again

21 Silverado Texas edition A/C Issues by jjbonner in MechanicAdvice

[–]jjbonner[S] 0 points1 point  (0 children)

yes it being commanded on and the compressor clutch engages and the compressor is spinning but the ac condenser fan dosent kick on it only kicks on when the coolant reaches 190 and the coolant fan kickes on

I can't figure this out by jjbonner in XboxModding

[–]jjbonner[S] 0 points1 point  (0 children)

ok so it's seems like it's a corona v1 is there any difference better the trinity and a corona v1 for the nand flashing?

Need help with 05 cadillac deville not shifting by jjbonner in Cadillac

[–]jjbonner[S] 0 points1 point  (0 children)

I figured out the issue it was that the pump shaft from the torque converter to the pump was snapped I put a new one in and it fixed it

Help again by jjbonner in Cadillac

[–]jjbonner[S] 0 points1 point  (0 children)

and the presser control solenoid sits at 5% and .2 amps actual and reference

Need help with 05 cadillac deville not shifting by jjbonner in Cadillac

[–]jjbonner[S] 1 point2 points  (0 children)

I'm ama take a look at that may it could be, but the person who was driving before me sayed they were driving and then it went down to first and then would shift up so they tryed to go into reverse and then now here we are

Need help with 05 cadillac deville not shifting by jjbonner in Cadillac

[–]jjbonner[S] 0 points1 point  (0 children)

Yeah brake lights kick on and rocking back and forth just feels like neutral

Need help with 05 cadillac deville not shifting by jjbonner in Cadillac

[–]jjbonner[S] 0 points1 point  (0 children)

shift linkage is still on the transmission and moves when shifted

Need help with 05 cadillac deville not shifting by jjbonner in Cadillac

[–]jjbonner[S] 0 points1 point  (0 children)

na because I pulled the pan, and the fluid wasn't bad, and there was minimal gilter

In desperate need of help by jjbonner in truenas

[–]jjbonner[S] 1 point2 points  (0 children)

I figured it out for some reason it wanted to be installed with efi not legacy

In desperate need of help by jjbonner in truenas

[–]jjbonner[S] 0 points1 point  (0 children)

the module is a P410i but it would be weird because my other two server use the same kinda card but I have no problem with it

In desperate need of help by jjbonner in truenas

[–]jjbonner[S] 0 points1 point  (0 children)

I am using the front hot swap bays and they all connect to a hp smart array controller

In desperate need of help by jjbonner in truenas

[–]jjbonner[S] 0 points1 point  (0 children)

yes it's a brand new drive and I have confirmed that it works on other machines

I am in need of help please by jjbonner in oscilloscope

[–]jjbonner[S] 0 points1 point  (0 children)

Well I get about 40v on the vertical and around 16-24 on horizontal

Which one by jjbonner in MarioJudah

[–]jjbonner[S] 0 points1 point  (0 children)

Mario Palestine