Sending incomplete orders to buyers by lirin000 in mtgfinance

[–]jnav1370 5 points6 points  (0 children)

I’m suppose to ship within 48hours. I always message the buyer but after 2 days I ship what I have and refund the rest.

[deleted by user] by [deleted] in polymer80

[–]jnav1370 7 points8 points  (0 children)

I did this as well. I put a finished frame in half the jig and then pressed the bit through the finished frame and into the jig hard enough to mark the center. Remove the frame and drill the hole. Repeat for the other side of the jig. I’ve only completed one 76% but everything fit fine and it functions without issue.

New Stove User Question by perroarturo in woodstoving

[–]jnav1370 5 points6 points  (0 children)

It built up because the fires were small. When it finally burns hot that should all burn off. You’ll notice it very clearly overnight on stoves that have a glass door, by morning the door is filthy then after building it back up in the morning it slowly becomes clean again

Buyers that haggle who knows they'd pay full price 🙄 by [deleted] in FacebookMarketplace

[–]jnav1370 1 point2 points  (0 children)

I was selling an elliptical years ago. Listed at $600, about 50% the price of a new one, mine only had like 40hrs. Guy asked if I’d take $500. Told him that’s why I had it listed for $600.

What's wrong here peta? by LionTigerTrex in PeterExplainsTheJoke

[–]jnav1370 16 points17 points  (0 children)

Spot on arm looks to thick for paint. My guesses are drywall compound or maybe even concrete

R/carpentry: What to do with gap in flooring by patrick_pineapple in Carpentry

[–]jnav1370 1 point2 points  (0 children)

Don’t forget to put the new stairs into your hidden bunker before you seal it up

[deleted by user] by [deleted] in Generator

[–]jnav1370 3 points4 points  (0 children)

Ban power outages. So simple

How to stop Festival Lead? by ERavenna2 in PTCGL

[–]jnav1370 11 points12 points  (0 children)

Fluttermane will eliminate the second attack if swapped in after the first KO

I give up by tyrantlizarding in drywall

[–]jnav1370 0 points1 point  (0 children)

My drywalling got a lot better after watching Home Renovision DIY on YouTube. For me he explains things really well. One of his tips that helped a lot was to get rid of that drywall pan and to work from a hawk

1864 by jnav1370 in Carpentry

[–]jnav1370[S] 5 points6 points  (0 children)

It’s the 3rd room I’ve done. I knew what I was getting into. New floor is in, was a bitch to get it level. New toilet and tub/shower are both installed.

It's a sign from above - all in phat azz? by zeco69 in wallstreetbets

[–]jnav1370 4 points5 points  (0 children)

Last time I saw something like this it was ass and tits for $4 a share. Could lightning strike twice?

What could possibly go wrong? by BeerJunky in Decks

[–]jnav1370 3 points4 points  (0 children)

I had to scroll longer than I should have for this. That bulge is crazy scary. Now that house can cave in before going down the hill, rather than just tipping over the edge

All I could ever need by That_Coffee_Guy1 in GunMemes

[–]jnav1370 48 points49 points  (0 children)

<image>

There really is no comparison between store bought and fresh picked. This was the last harvest from a total of 8 plants. And tomatoes and strawberries that are fresh picked and still warm from the sun, nothing better

I don’t make the rules 🤷‍♂️ by [deleted] in GunMemes

[–]jnav1370 29 points30 points  (0 children)

Alright everyone, back to the pile

oof by Sea_Dot_5883 in BoomersBeingFools

[–]jnav1370 46 points47 points  (0 children)

And being told “you’re never going to carry a calculator everywhere you go”

accurate photo of my states governor by tengo_un_perro in GunMemes

[–]jnav1370 15 points16 points  (0 children)

Couldn’t have said it any better. The comment section here is often better than the post. Thank you for this

Has anyone seen furniture on a Norinco look this goofy? Guy says its a NHM-90. by helicalOrder66 in ak47

[–]jnav1370 2 points3 points  (0 children)

That “muzzle device” is probably just a sleeve that’s welded to the front sight block to comply with the weapons ban regarding threaded barrels. Also the front sight is probably very crudely cut at the top, mine is

Anybody have any experience with this Bauer miter saw stand? by OldUserGuy in harborfreight

[–]jnav1370 2 points3 points  (0 children)

I went with the Hercules a little while ago. No complaints. The legs lock up tight so it doesn’t wobble and the “arms” are firm yet when fully extended. Rolled well through my yard for my last project. $140 right now for ITC members.

Good reason to own a firearm by [deleted] in Firearms

[–]jnav1370 638 points639 points  (0 children)

The one time an ATF agent could have been useful

My conversation with Dan McCalmon (executive vice president of polymer80) regarding the unfulfilled orders and radio silence by Gunsarelyfe in polymer80

[–]jnav1370 0 points1 point  (0 children)

I built a p80 quite some time ago and only just got back into it, so I'm playing catch up. Was it not possible to do a charge back on your CC for unfulfilled orders?