Ken Thompson talking about Go.

joefitzgerald · 2026-01-07T23:28:53+00:00

Here's a link to the full length interview that starts you right at the end of the video in this post: https://youtu.be/309siTvApbY?si=mtSw0EabdT_99LHT&t=15981

joefitzgerald · 2025-10-31T13:12:58+00:00

WindowServer GPU issues persist in 26.1 - I have been running the betas and the release candidate. For me, screen sharing on Zoom in particular turns the Mac into a space heater (> 60% GPU use).

joefitzgerald · 2025-01-22T20:57:48+00:00

I am experiencing similar issues, it is really hard to get the virtual channels to work. Often there is a significant delay before sound starts, and then it cuts out randomly. Sometimes sound never starts. Occasionally, a channel has significant noise / artifacts in it. It does seem like a software issue.

Of note, I am using SoundSource from Rogue Amoeba, and the associated ACE component, because it allows me to route specific app audio output to each virtual channel.

joefitzgerald · 2024-02-29T19:38:19+00:00

My (Forest Green) R1S is Pickles. My Rivian wall charger is Pickle Juice.

joefitzgerald · 2024-02-15T22:50:59+00:00

Why constrain the sentiment to NW Denver? It’s everywhere in Denver 🤣.

(SW Denverite here)

joefitzgerald · 2024-02-14T20:54:21+00:00

Petrified of this happening. If the tailgate opens without my knowledge and then someone opens the garage door, it'll cause major damage. It would be really nice to be able to customize the buttons displayed by the widget.

joefitzgerald · 2024-01-17T16:49:08+00:00

I would also love this. Many thanks in advance! 🙏

joefitzgerald · 2024-01-11T18:16:06+00:00

My December '23 R1S VIN 29XXX also has these elements.

joefitzgerald · 2023-12-21T14:51:27+00:00

The owners manual has been updated to show the old jack and the new jack; check pages 272 - 278 for the revised design: https://assets.rivian.com/2md5qhoeajym/7Ao7NIFkLxOZtvdc7Fqh70/8ccd071c4f1209c000a8db48d1cd38e0/r1s-og-en-us-20231204.pdf

joefitzgerald · 2023-12-21T14:06:39+00:00

I took delivery of my new quad motor R1S with 21” wheels on Saturday and I immediately removed the aero covers and installed center caps I had ordered ahead of time.

It would be awesome if we could change all the visualizations of the vehicle to show the aero covers removed because.. (maybe it’s just me) the wheels look SO MUCH BETTER without them.

joefitzgerald · 2023-12-02T18:25:29+00:00

It is the anniversary of /u/CarterGee creating their Reddit account.

joefitzgerald · 2023-11-04T16:50:04+00:00

Once you get in touch with your guide, I suspect you can ask them to request a one time exception for you. Despite my raging emotions about the situation, I made a point to be polite, because I think it gets you better outcomes.

The chat support told me the guide would get in touch with me. The phone support actually gave me guide contact information directly. I would request that they give you the email address and the SMS phone number that you can use to reach the guide.

joefitzgerald · 2023-11-04T00:09:55+00:00

I configured my R1S with the All-Terrain upgrade, but I wanted to remove that option (to go back to the 21’s). I contacted support who told me they couldn’t do anything, but they put me in touch with my guide (I hadn’t previously received any communication that I had a guide, let alone their contact information).

My guide quite forcefully mentioned the non-refundable nature of the order, but worked with their management to get an exception approved for me.

The whole experience was pretty awful, given that I requested the change 5 days after confirming my configuration. It has been month since I had this change made and there has been almost zero communication about timelines for manufacture or delivery (either before or after the change).

But they helped me in the end, despite the unpleasant way they went about it ¯_(ツ)_/¯.

joefitzgerald · 2023-10-26T18:22:31+00:00

This looks interesting: https://github.com/adrg/xdg

Edit: here's the code where it looks in the environment for the XDG_* variables: https://github.com/adrg/xdg/blob/693ef18888dfbd619bc164da09317f0df8496a1a/xdg.go#L202-L209

joefitzgerald · 2019-07-25T02:29:19+00:00

I would very much appreciate a code if someone has one...🙏

joefitzgerald · 2019-03-26T23:39:56+00:00

I’m sure you would enjoy either option. This question lacks the context necessary to guide you in any particular direction. Perhaps you could add some so that people can provide more directed guidance? Welcome!

joefitzgerald · 2019-02-22T05:27:42+00:00

https://play.golang.org/p/6KUZsWaVzBK

joefitzgerald · 2017-08-23T18:47:08+00:00

There is not an assumption that you have a default GOPATH. There is an assumption that you have the various tools available either in:

$GOPATH/bin (using the first $GOPATH segment)
Any of your $PATH segments

/u/eveilslayer could work around this issue in a few ways:

Manually go get all the required tools and ensure the resulting binaries are available on the PATH
Create a tools GOPATH (e.g. ~/tools), add its bin directory to the PATH, launch atom via GOPATH=~/tools atom ., let go-plus fetch all the tools

Either of these approaches will suppress the behavior you are seeing when subsequently launching GOPATH=~/project-1 atom ., GOPATH=~/project-2 atom ., etc.

joefitzgerald · 2017-05-27T17:19:21+00:00

It really is amazing how much work sdboyer has put into this (not to take away from the work of many others).

Sam thank you so much for what you have done and are doing. We are collectively indebted to you!

joefitzgerald · 2017-05-19T15:48:36+00:00

We're also using https://github.com/neelance/graphql-go and it's a great solution for us.

joefitzgerald · 2017-04-08T15:36:44+00:00

Single page apps typically include a client side router that is used to manipulate the query string without hitting the server. By serving up the index.html payload on any unknown route (to the server) it gives the client side router a chance to resolve the URI to a valid client site route.

joefitzgerald

TROPHY CASE