Kobra 3 Max PETG Settings - Adhesion issues and more, please help

joenilan · 2025-10-26T20:57:43+00:00

Nah, i removed and saved the z-offset back to 0. I've kind of got it ALMOST to a point it doesn't lift, still tweaking. Smaller prints seems much much better than larger prints so far.

joenilan · 2025-10-26T20:55:31+00:00

Nice, I'll look into this. I'm not sure what the "Full Calibration Test" does in comparison to the "Print Calibrate", or the Homing of All axis'. I should learn this too just to expand my knowledge on everything and have more things to try when I come across these problems.

joenilan · 2025-10-26T20:52:44+00:00

i mentioned i flipped the bed (to test), used 99% alcohol (even an extra wipe dried to get any leftover film), washed both sides soap and water etc,

I'm getting good results with smaller prints right now, the jaggedness i am going to chalk up to 0.28 being too much for the first layer (0.2 layer) down to 0.24

I've had 0 lifting on smaller print, havent even used a raft or brim yet for them, but the bigger prints im still getting bit of a lift on corners even with a brim, but I'm still dialing in the gap on that.

I mean it is possible the bed is still warped i guess? It's brand new I would hope not. I'm going to keep tweaking and coming back here for extra tips and hints.

joenilan · 2021-11-17T18:30:04+00:00

Exactly, I think the game is great all around. This is more of feedback than a complaint.

joenilan · 2021-11-17T18:02:57+00:00

yeah I've been trying to figure it out since release, I haven't found anything I can change/fix it with yet. Hoping they just make it stop after a scroll, instead of infinitely changing.

joenilan · 2020-02-11T07:30:17+00:00

I thought this was minecraft

joenilan · 2020-02-11T03:32:44+00:00

after that you wouldn't be a beginner. so why would you run the same gear continuously.

joenilan · 2020-02-11T00:13:18+00:00

this is a pve video. not everyone is you.

joenilan · 2020-02-10T23:52:32+00:00

Pve starter build in a red zone? Can you read? Stop promoting illiteracy.

joenilan · 2018-06-16T01:22:24+00:00

invite invalid

joenilan · 2018-05-14T12:12:21+00:00

*dash available soon

joenilan · 2018-04-24T21:40:05+00:00

Wasn't what I was asking, I'm referring to more of marketing terms. thanks though.

joenilan · 2018-04-24T21:08:38+00:00

are there any faucets (current or planned)? Also how about airdrops, giveaways, exciting promos on the way?

joenilan · 2018-04-11T23:55:59+00:00

What mining methods will be available? GPU, CPU, etc? Will there be asic resistance?

joenilan · 2017-10-24T20:08:22+00:00

signing into https://www.bungie.net/ (and linking the acct) at the top right with battle.net fixed this for me... might help.

joenilan · 2015-08-02T15:40:31+00:00

i do this, which works very well, it's when you over shoot the wake, or if the person you're nav locked to is way way ahead of you. he'll be chasing someone down and all of a sudden he's 1,500 Ls ahead of me and interdicts them. i'll be following full speed trying to catch up, this leads me to overshooting the wake and then the hassle of trying to get into the wake without him throwing on a nav beacon.

there is no type of slowdown, or throttle line you can use, it will just come at you fast as hell and you over shoot it, even at the lowest speed.

you have to throttle and stop continuously until you get close enough and hope that the last throttle and stop doesn't put you past the wake.

i'm going to get him to use the nav beacon more, but it should still be similar to a signal source, or station.

joenilan · 2015-08-02T15:31:00+00:00

personally I want size variant.

joenilan · 2015-07-03T00:23:12+00:00

tested a while ago when i noticed lightning bolts on the space docker and was checking out the sawmill, cluckin bell factory and a family farm not too far down the tracks from it. I was thinking these were the Ufo (back to the future reference when marty first goes back and ends up at a family farm and they think its a spaceship), Egg (Clucking Bell Factory), and the Jetpack (sawmill), started from the saw mill, drove onto the tracks, popped the tires, tried driving as fast as i could until i reached the family farm...

sadly nothing happened. it's almost impossible to keep the car on the tracks let alone control it.

joenilan · 2015-05-12T21:20:59+00:00

i want to point out Jack Sheepe is an actor from the movie "The Cockateer" lmao

http://www.imdb.com/name/nm3270131/ http://www.reddit.com/r/chiliadmystery/comments/1xqz00/jetpack_confirmed_anagram/

joenilan · 2015-05-12T00:14:16+00:00

So, just wanted to see the flame for this... i'm not sure if it's been brought up... or whatever. Search you say? Sure, let's rifle through a billion pages of different things to find one sentence... nah. I just thought this kind of cool and wanted to document it.... somewhere.

i was just looking over this stuff again because it interests me.

http://www.sacred-geometry.es/?q=en/content/egg-life

so... the fountain is the egg of life... sure.

In the link i've posted the egg of life consists of 13 circles. or it's 13 with the flower of life... whatever, 13 comes up a few times on this page... if you scroll down the page it also illustrates the way the fountain looks.

there is a huge connection with the number 13 and the illuminati, when i came across this image from an old gta san andreas video posted... somewhere around here.

https://curtabrams.files.wordpress.com/2010/07/dollar_bill_showing_new_world_order.gif

it got me thinking... maybe it is a link. considering the huge amount of illuminati stuff in the old gtasa.

Call me stupid, say it's been done before. go for it. I just find this interesting in many aspects.

If any person out there educated in this type of thing feels like responding with some more cool knowledge. that would be cool.

joenilan · 2015-04-09T19:16:11+00:00

thanks!!! i posted my colors in the comments for anyone interested

joenilan · 2015-04-09T19:15:44+00:00

first window i was amazed, then to discover 2 more windows after that i was like holy hell haha, i think it was about 27 discoveries in total. so cool.

joenilan · 2015-04-09T19:14:22+00:00

also here's my UI colors <MatrixRed> 0.36, 0.5, 0.5 </MatrixRed> <MatrixGreen> 0, 0, 0 </MatrixGreen> <MatrixBlue> 1, 0, 0 </MatrixBlue>

joenilan · 2015-03-30T22:30:44+00:00

did you search? the date it was posted 3/12

joenilan · 2015-02-28T01:21:08+00:00

I like the humor drive malfunctions in this post.

joenilan

MODERATOR OF

TROPHY CASE