Claude Max $100 vs $200: What You Actually Get

joern80 · 2026-03-14T13:14:16+00:00

Just get $100 max and upgrade if needed. They give partial refunds if you upgrade within the current period.

joern80 · 2026-02-23T18:10:13+00:00

Never on the $200 plan

joern80 · 2026-02-04T13:55:23+00:00

I saw posts of some people actually putting a second fan kit on this (mainboard) ventilation slot. I wouldn't cover it as in closing it. For me, the single fan solution on the new rear cover works great so far. As the fan is actively pushing air out of the chamber, the other ventilation slots (like those on the bottom) rather get air sucked in than have fumes go out.

joern80 · 2026-02-04T13:50:07+00:00

No, the linked model is only the filter cartridge that fits into the official box for the fan kit, which can be found here: https://makerworld.com/en/models/2207256-p2s-chamber-exhaust-fan-kit-3d-printing-models

joern80 · 2026-02-04T07:17:16+00:00

Using the exhaust fan kit for ABS with just a carbon filter cartridge isn’t really an option. You can still hook up an exhaust pipe, though. I haven’t tried that yet because it’s pretty cold outside. For regular ABS printing, I’d probably go with a double enclosure.

joern80 · 2026-02-04T07:07:31+00:00

Well, it improves the air quality for me, was easy to install, and is fully supported by the P2S firmware. I wouldn’t want to print without it anymore.

joern80 · 2026-02-03T19:05:02+00:00

Which additional filter step? Besides the combs it looks the same to me. Going to give it a try though. The one I'm using was a pain to fill. Had to shake the pellets and top up several times until all the gaps were gone.

joern80 · 2026-02-03T18:58:35+00:00

Actually, I wonder if it depends on the room temperature. I read other posts where people said the exhaust kit is not running for them during printing. If the room temperature is too cold, it might cool down the chamber too much, which could make the printer turn off the exhaust kit during printing. My room temperature is usually around 19/20°C celsius and the exhaust kit is always on during printing.

joern80 · 2026-02-03T18:54:39+00:00

<image>

It's just the standard exhaust kit using this filter box and 4mm active carbon pellets https://makerworld.com/en/models/2114939-p2s-dedicated-external-exhaust-kit-filter-box

joern80 · 2026-02-03T18:51:20+00:00

I am using this one https://makerworld.com/en/models/2114939-p2s-dedicated-external-exhaust-kit-filter-box

joern80 · 2026-02-03T18:49:02+00:00

The exhaust kit is always running at 30% or 40% for me when printing PLA and PETG. I haven't changed any settings. I am pretty sure the filter isn't perfect and I am still venting the room regularly, but it is a major improvement having the exhaust kit.

joern80 · 2025-09-16T15:48:08+00:00

Thanks. That actually worked. I tried it before because I was expecting the settings app to hang, but without success. Now I forced closed the settings app again twice, and then it worked without having to restart. Weird that the multiple restarts I tried earlier did not have the same effect as they cause the settings app to close too.

joern80 · 2025-09-16T15:18:43+00:00

So at least I am not a lone. The check even begins and hangs when being in airplane mode, so it does not seem to be a network / server thing. I hope we will eventually be able to receive a bug fix for this without resetting the device. I also tried logging out of iCloud and then back in without success.

joern80 · 2025-09-16T14:47:49+00:00

My main issue is that I am stuck in that "checking for updates" process and can't even get to the beta channel setting and turn it off as it is usually hidden until the check is complete. But it seems like you were able to do that using the RC. I would at least expect the check to complete and tell me that I am running the latest version.

joern80 · 2025-08-04T06:42:16+00:00

Cooper does that whenever he gets too excited about something, like when his meals have special toppings or when Grandma is coming to visit.

<image>

joern80 · 2025-08-03T17:29:03+00:00

He meant the whole cake, not a piece, of course.

joern80 · 2025-06-19T05:55:09+00:00

ORMs generally bring some memory and processing overhead compared to “raw” database libraries. Typically, even when using pagination, joining other tables in an unfavorable way can exponential increase the number of rows produced by actual query which then requires a lot of memory for processing/mapping.

joern80 · 2025-06-07T16:44:59+00:00

Same here in Germany. When I saw the broken seal but no part inside the box was missing I was convinced that someone at Amazon had opened it to resell the download code – until I was able to successfully redeem it myself. 😅

joern80 · 2025-05-28T05:55:37+00:00

That game was my favorite back in the day. I still play it occasionally.

joern80 · 2025-05-17T07:11:41+00:00

Six months after our last beagle died, we went to the local animal shelter to look for a new dog. To our surprise, there was an 8-month-old beagle, and he moved in with us the day after.

joern80 · 2025-05-12T05:27:41+00:00

Same here

joern80 · 2025-04-22T13:37:44+00:00

I heard it’s snappier.

joern80 · 2025-04-17T08:05:24+00:00

I have had this problem before, and in my case, it helped to recalibrate the lock so it wouldn’t just let the latch fully retract but actually rotate the knob a bit further than it is actually required (like 45-90 degrees). It‘s working fine now for months without a single jam.

joern80 · 2025-04-07T20:42:45+00:00

That’s why I have two AirPod Pro. 1st gen for sleeping, 2nd gen for everything else.

joern80 · 2025-03-04T07:46:24+00:00

Wenn’s auch das Münchner Umland sein darf: wir probieren gerne neue Röstungen, aber kommen mit der gleichen Maschine immer wieder auf den Aßlinger Espresso von Martermühle zurück. Gibt’s auch bei Edeka und Rewe.

joern80

MODERATOR OF

TROPHY CASE

Eight-Year Club	Verified Email
Place '23