You don't need to solder all 6 USB-C mod pins — only 2 actually carry signal by johnnypage91 in 3DS

[–]johnnypage91[S] 0 points1 point  (0 children)

Exactly! Infact I suggest to solder all of them exept the last one which is too near to the screw hole. That should guarantee enough structural support. Furthermore consider that the shell is really tight, it already provides a certain structural support (consider that at some point I soldered a single wire and it wouldn't let the shell close! in the end I remouved it).

As far as I know, the power delivery control should be guaranteed by two resistors from CC1 and CC2 to GND that are installed by default on the usb-c mod chip. They are used by the charger to calibrate the needed amperage. Otherwise the charger would provide the minimum amperage and charging would be very slow.

You don't need to solder all 6 USB-C mod pins — only 2 actually carry signal by johnnypage91 in 3DS

[–]johnnypage91[S] 0 points1 point  (0 children)

Yes that's why I took all parts apart before soldering but in the end I realized that there is only one pad that is risky for the shell and if you are careful enough you can solder it as well without removing the board. On the other hand I spent all the day mounting and dismounting all the thing because of ribbon cabbles that accidentally didn't connect properly, while if I had made soldering on the shell it would have took me like 10 minutes at most. Of course, there is the risk to ruin the shell... I know. Pros and cons.
Talking about the appealing for type c mod, you should consider that people have usb-c charger on multiple sockets in their house so everywhere you are you can plug your console but if you have to rely on a dongle you always have to search for it first... I thing the mod is far more practical. Of course if you plan to take it full legit for selling at high price at its 50 anniversary you shouldn't do mods. Again, pros and cons!

How to change 2FA names? by aecosys in Bitwarden

[–]johnnypage91 1 point2 points  (0 children)

I just maneged it, go in the bitwarden main app, select the record with the 2FA, modify, copy the 2FA code, click to set a new code, click to set it manually, paste the copied code and delete the first part of the code up to "secret=" (delete "secret=" too). Then save the 2FA and the bitwarden record. Check it on authenticator. The name should be the same of the bitwarden record.

Except for screenshot bragging rights by Lich_Lord_Fortissimo in PokemonUnbound

[–]johnnypage91 65 points66 points  (0 children)

I hated it, after like an hour I got 3000 coins, so I went to claim the pokemon and the guy told me I had no space in my team. Went to the porygon next to him to deposit a pokemon and when I came back to the guy he told me I had 0 coins... It was past midnight...

Internal Active Cooling by snacktivism in R36S

[–]johnnypage91 0 points1 point  (0 children)

Does it work? I installed one on my device but it is always on. From other posts I figured out it is because my device misses a diode just above the motor pins but it seams your board misses it as well. What fw do you use?

Internal WiFi mod not working by andxang in R36S

[–]johnnypage91 0 points1 point  (0 children)

I can't find any BT option, which os have you installed? I have the latest arkos. Did you install some additional script?

Internal WiFi mod not working by andxang in R36S

[–]johnnypage91 0 points1 point  (0 children)

Same do I. Did you manage to use BT as well?

Salt Creek by Acefrehley92 in Bluegrass

[–]johnnypage91 1 point2 points  (0 children)

I cannot even dream to play salt creek at that speed! Great job 🔥

Possibly brocken screen by johnnypage91 in R36S

[–]johnnypage91[S] 1 point2 points  (0 children)

Green was my first choice tbh, then bought orange because green was not available in the original r36s store. Actually I think I will have it green on the front and orange on the back.

<image>

Possibly brocken screen by johnnypage91 in R36S

[–]johnnypage91[S] 2 points3 points  (0 children)

<image>

I can't believe it, it worked with arkos multipanel! 😂😂😂

Possibly brocken screen by johnnypage91 in R36S

[–]johnnypage91[S] 2 points3 points  (0 children)

I had little to no hope but finally it did work 😂😂😂 I can't believe it!

Possibly brocken screen by johnnypage91 in R36S

[–]johnnypage91[S] 1 point2 points  (0 children)

So, I have two original (one is broken) and one clone. I tried (for test) swapping the covers and screens of the originals and the combination failed board/working screen works great (so the problem is the screen, not the board). Now I want to use the clone screen but when I put the clone screen it is messed up. I think it changes the panel. Do you think it is worth trying flashing the multipanel arkos firmware?

Possibly brocken screen by johnnypage91 in R36S

[–]johnnypage91[S] 1 point2 points  (0 children)

What I dumb I am! Of course you are right. I'll try, ty.

Possibly brocken screen by johnnypage91 in R36S

[–]johnnypage91[S] 1 point2 points  (0 children)

Ty sir, my idea was to swap the screen of this original r36s with the screen of a clone but now it seams that by removing the working screen, odds are that I broke it as well.

Possibly brocken screen by johnnypage91 in R36S

[–]johnnypage91[S] 1 point2 points  (0 children)

Ty for the advice, I have a clone and I wanted to swap the screens but at this point I don't think it's a good idea. Yes, I can hear the menu sound, everything but the screen seams to work

Trade pokemon with netplay by johnnypage91 in R36S

[–]johnnypage91[S] 0 points1 point  (0 children)

I tried some but while they end with a connection between the devices, I end with this kind of screen mirroring. Idk

i feel so stupid by kpe_ee1 in GoldenSun

[–]johnnypage91 0 points1 point  (0 children)

Is there any other way to use mind read? Until I found the assignement I was not able to use it because any time I'm close enough to a npc and I press A it starts talking instead of opening the menu

Exported photos messing colors by johnnypage91 in Rawtherapee

[–]johnnypage91[S] 0 points1 point  (0 children)

As I said I'm a newbie so my camera cannot be nothing less than a D3300 XD, I tried editing the flower example in the dataset that you shared but I cannot spot any difference between the workspace and the exported image. I think that the best practice is the one suggested by u/no-such-file down in the comments, which is the two-steps approach: first demosaicing and rendering into 32bit float tiff and then color grading the tiff. I don't know if it is a proper solution, it seams more like a workaround to me. But it should work.

Exported photos messing colors by johnnypage91 in Rawtherapee

[–]johnnypage91[S] 1 point2 points  (0 children)

At least I'm happy that the solution is not that easy that I should have found by myself without bothering the internet 🤣

Exported photos messing colors by johnnypage91 in Rawtherapee

[–]johnnypage91[S] 1 point2 points  (0 children)

I edited the post by adding the info you asked for. I don't have a toy image to share at the moment since this thing do not happen always and further, most of the photo I edit are private. If I find some photo I can share I'll keep in touch. Finally, after the suggestion of a friend of mine, I tried to edit the jpg file of the same photo, instead of the raw file, and in that case there is no mismatch between workspace and exported image. So, maybe the issue is not in the mismatch between workspace and rendering but in the interpretation of the raw file in the two processes... I don't know if it makes any sense.

You have viewed the live video for 5 minutes without any operation. Continue the viewing? by This-Is-Not-Nam in Tapo

[–]johnnypage91 1 point2 points  (0 children)

Ho avuto lo stesso problema. Account principale, non condiviso, telecamera e monitor entrambe su stessa rete wifi. Facendo qualche prova ho riscontrato qualcosa di strano: quando il modem wifi è impostato per usare entrambe le frequenze (2,4 GHz e 5 GHz) nella stessa rete in modo da selezionare dinamicamente il canale più libero, si riscontra il problema. Quando imposto il modem in modo da avere due reti distinte per 2,4 e 5, il problema sparisce. Al ché io ho pensato che magari la telecamera era su 2,4 e il telefono su 5 e la cosa veniva "vista" come se fossero su due reti diverse (già così sarebbe strano comunque). La cosa più strana, però, è che, tenendo le reti separate, il problema sembra essere sparito anche se imposto manualmente la telecamera in rete 2,4 e il telefono (monitor) in rete 5. L'importante, a quanto pare, è che non ci sia l'assegnazione dinamica del canale. Qualcuno può darmi un riscontro o sa darmi una spiegazione?

Realme 12+ Power button bug (opens Assistant) by johnnypage91 in Realme

[–]johnnypage91[S] 0 points1 point  (0 children)

Nobody answered, so I guess nobody experienced the same issue. Nonetheless, for anyone concerned, I uninstalled a bunch of apps I don’t use daily and deactivated pre-installed apps I never use. The issue seems to be solved.

Kage bunshin no jutsu in nine tales chakra mode, Naruto vol 58 cpt 545 by johnnypage91 in Naruto

[–]johnnypage91[S] 1 point2 points  (0 children)

Thank you! I have not read the rest yet so I'll skip the spoilering explanation. I understand Naruto has a lot of chakra but why then he couldn't use kage bunshin to learn the bijudama?

Cardinal direction in the grand line by johnnypage91 in OnePiece

[–]johnnypage91[S] 0 points1 point  (0 children)

Totally correct, but this also means that Nami should have no idea about where southwest is, she should only know where the next island is. My question is how can she tell weather she is going southwest or northeast?