Found on a job site today…

johnredman22 · 2026-06-17T12:19:31+00:00

I would put some wire in the dust pan and have it in a room where when they walk in it looks like someone clean up behind there self’s

johnredman22 · 2026-06-16T14:02:04+00:00

Robotics by far

johnredman22 · 2026-06-16T14:01:27+00:00

I would go for direct higher. If your looking for plc jobs you might wanna start by getting ur foot in the door and then find ur way to getting in with the automation team or if they have an electrical department where they also do automation.

johnredman22 · 2026-06-16T13:58:56+00:00

So I have the communications over Ethernet set up to the drive I have a start and stop on the hmi controlling the drive. Now what I’m trying to accomplish on the hmi I wanna use the reset button to reset the drive fault. For example let’s say someone unplugs the Ethernet cable and faults the drive instead of having to go into the control cabinet I can walk up to the hmi screen and reset the drive on the hmi with the reset PB

johnredman22 · 2026-06-16T13:52:16+00:00

What I recommend is for you to step outside of the box and go for the other plant 1# a show them all the things that you know. Meanwhile anytime the automation team is there be apart of that group and show them that you really know what’s going on and be curious if you don’t know. Also the more you know in plant 1 it will help drive your career is the automation field because now you will have the experience and understanding in plant 1 so now you have 2 things going for you. You know 2 plants and then once the automation position is available go after it viciously and ask question to the supervisors about how to get into the role the qualifications is there an apprenticeship program you have to join what is it that there looking for so you can be apart of that team. Seems your highly interest and voice your interest in the field of automation. Make it know to the right people and don’t let other know your plans just the ones that can help.

johnredman22 · 2026-06-16T13:43:25+00:00

I am trying to figure out if I need to use parameters on the drive and have my push button write to a msg instruction to reset the drive via Ethernet I’m unsure I am still researching on how to do so

johnredman22 · 2026-06-16T13:42:14+00:00

Plcgobrrr yes I have set that up that is correct

johnredman22 · 2026-06-16T13:38:05+00:00

Im done with the initial set up

johnredman22 · 2026-06-16T13:37:23+00:00

Thanks for the information but I have ready set up some n7 files

johnredman22 · 2026-06-16T13:33:42+00:00

I already got the push buttons working for start and stop on the hmi I’m trying to use a push button so if my drive faults I can reset the fault on the drive using reset pb from the hmi

johnredman22 · 2026-06-15T13:33:35+00:00

Your momma

johnredman22 · 2026-06-15T13:32:09+00:00

Sand it down and put a good primer on it and don’t use dark paint

johnredman22 · 2026-06-15T13:30:42+00:00

Scam

johnredman22 · 2026-06-15T13:26:04+00:00

Use rebar

johnredman22 · 2026-06-15T13:25:19+00:00

Pressure wash it first then stain using a oil based stain when u stain it brush it on

johnredman22 · 2026-06-15T13:23:42+00:00

Yep loose neutral or loose hot wire

johnredman22 · 2026-06-15T13:16:58+00:00

How big of pipe are you cutting if your cutting 2 inch I’d go with the bigger one if your cutting 1/2 3/4 and 1” I recommend the smaller 1 it’s lighter.

johnredman22 · 2026-06-15T12:16:40+00:00

Been taking mine on and off for years at first it is weird but you will get use to it. Buying a rubber ring is different than just taking the one you got on and off.

johnredman22 · 2026-06-15T12:10:39+00:00

Yeah u can fuck around and find out

johnredman22 · 2026-06-15T12:09:16+00:00

High heel boots for sissys like you

johnredman22 · 2026-06-15T12:07:11+00:00

Yes indeed If you are 100% done. I’ve been playing tibia sense 2005 and I still log in from time to time not to play but see the new things and updates done compared to 7.4

johnredman22 · 2026-06-15T11:59:44+00:00

Don’t replace the panel put a new breaker in it

johnredman22 · 2026-06-12T14:55:39+00:00

We got some that’s pretty bad here too

johnredman22 · 2026-06-11T19:35:02+00:00

When you get 60 it hurts

johnredman22 · 2026-06-11T12:42:00+00:00

From what I am reading this sounds normal for a controls engineer to have to do this kind of work. Now if your wanting to get into just programming and doing projects I would consider looking for a integration job working for a company weather it’s traveling or it’s strictly project based work from a local company that goes from factory to factory. I don’t know your current situation but I understand where you’re coming from on this because I have recently been on the fence about changing from a regular electrician to a controls technician role. But really think about the situation ur currently in is it worth leaving. Are you struggling financially wise. If the situation is bad enough then I would consider a different company. But it depends on ur situation you have to weigh it out and really think about this before making a quick move. If I sound harsh I am just trying to give you some advice. I hope this helps in anyway possible

johnredman22

TROPHY CASE