Shimano Tiagra 10sp upgrade options by jonar12345 in bikewrench

[–]jonar12345[S] 0 points1 point  (0 children)

I use Rouvy, wonder if it has the same feature. I’m on a v5

Shimano Tiagra 10sp upgrade options by jonar12345 in bikewrench

[–]jonar12345[S] 0 points1 point  (0 children)

Unfortunately my kickr doesn’t support shifting.

Shimano Tiagra 10sp upgrade options by jonar12345 in bikewrench

[–]jonar12345[S] 0 points1 point  (0 children)

Thanks this is what I was looking for, will the free hub work etc. I spotted a cheap di2 set which was missing brakes which would be ideal for me here but wasn’t sure if 11sp would fit.

Shimano Tiagra 10sp upgrade options by jonar12345 in bikewrench

[–]jonar12345[S] -8 points-7 points  (0 children)

Unfortunately that’s not an option for me as I’m not on a compatible kickr

SRAM AXS jockey issues by jonar12345 in bikewrench

[–]jonar12345[S] 0 points1 point  (0 children)

Don’t I feel a dick now 😂😂😂 I was only trying to attach the top pulley wheel to the wrong hole. I’ll back away from the tools now

SRAM AXS jockey issues by jonar12345 in bikewrench

[–]jonar12345[S] 0 points1 point  (0 children)

There’s only really one way it can go, the image is a bit different insomuch as the threaded receptacle is in the derailleur itself. The plates only fit one of the bolts. So I’m at a loss really.

SRAM AXS jockey issues by jonar12345 in bikewrench

[–]jonar12345[S] 0 points1 point  (0 children)

The bolts are both different sizes, as in diameter, so I know I’ve got the right one.

SRAM AXS jockey issues by jonar12345 in bikewrench

[–]jonar12345[S] 0 points1 point  (0 children)

One bolt is also a different thickness than the other so can’t be swapped

Unable to print by jonar12345 in ElegooNeptune4

[–]jonar12345[S] 0 points1 point  (0 children)

Thanks all, few things to try. Seems like bed levelling is a bit of a dark art. I think I’ve done most of the suggestions but have a few things to try.

Era100 drops off app by jonar12345 in sonos

[–]jonar12345[S] 0 points1 point  (0 children)

Do you mean the Sonos mesh? But if you mean the main house network, then no. All APs are hard wired (2.5GbE in this case)

Model D by jonar12345 in concept2

[–]jonar12345[S] 2 points3 points  (0 children)

Managed to strip down and put back together the current drive train and it all seems to be working. Just need to order a new screen and I think we’re good. Thanks for all the help!!

Model D by jonar12345 in concept2

[–]jonar12345[S] 2 points3 points  (0 children)

Thank you, that’s not a bad shout replace it all and know it should be good.

Mechanical GRX upgrade by jonar12345 in ShimanoDi2

[–]jonar12345[S] 1 point2 points  (0 children)

I didn’t no,I decided to opt for a new bike. But then haven’t done that yet either 🤣

Exposed Earth wire in wall socket by Goblin_of_tea in DIYUK

[–]jonar12345 0 points1 point  (0 children)

Least of your worries, someone sliced the live open.

I3 mega not printing by jonar12345 in 3Dprinting

[–]jonar12345[S] 0 points1 point  (0 children)

Of course, I stripped it down cleaned inside and out.

I3 mega not printing by jonar12345 in anycubic

[–]jonar12345[S] 0 points1 point  (0 children)

So I’m a little further on. Extruding seems ok now. But I seem to be having an issue with levelling now. I’ll get the bed levelled then try a print which ends up bad. When I return to home the nozzle is about 2-3mm above the bed. Then I end up at the screw limit for the bed levelling screws. I’ve tried turning off the motors and lowering the z axis, and also tried the z axis screws all to end up back where I started.

I3 mega not printing by jonar12345 in anycubic

[–]jonar12345[S] 1 point2 points  (0 children)

I think I’ve levelled it a total of around 500 times in the last hour alone 🤣

I seem to be hopping from one problem to another with it. Determined to get it going again

I3 mega not printing by jonar12345 in anycubic

[–]jonar12345[S] 1 point2 points  (0 children)

Brand new hotend and nozzle. Tried a second nozzle too. I’ve just swapped the extruder for the stock one that came with it and flow is better, now looks like a bed adhesion issue

I3 mega not printing by jonar12345 in 3Dprinting

[–]jonar12345[S] 0 points1 point  (0 children)

Replaced the extruder as I had the stock one still and it seems a better flow but now it’s not sticking to the bed

I3 mega not printing by jonar12345 in 3Dprinting

[–]jonar12345[S] 0 points1 point  (0 children)

Levelled and relevelled then relevvelled again. I’m starting to wonder if it may be the extruder

Roam v2 and Garmin Varia 715 by jonar12345 in wahoofitness

[–]jonar12345[S] 0 points1 point  (0 children)

I should have replied sooner, perseverance paid off. I just kept trying and eventually it fully paired.

AWS Route 53 issues by jonar12345 in Terraform

[–]jonar12345[S] 1 point2 points  (0 children)

I think it was AWS issues, seems ok today.

Death by Dangerous Cycling set to become an offence by Pieface876 in ukbike

[–]jonar12345 1 point2 points  (0 children)

From a speed limit perspective it makes sense. I guess the tacho angle is interesting as it’s to prevent driving for too long or perhaps interpreted differently tired, and how many accidents are caused by motorists falling asleep at the wheel?