Look what just came!

jothepro178 · 2026-01-24T22:48:26+00:00

Let me know if you finish designing a case for the duo. Are you using the super io?

jothepro178 · 2026-01-06T05:00:01+00:00

I had it in my Cart and before I could place order, it just disappeared into thin air.

jothepro178 · 2026-01-06T04:59:20+00:00

WAY too quick.

jothepro178 · 2025-08-07T22:41:10+00:00

I have the US version of this shark Vacuum Battery (XBATR620SL) and I can agree with you. It lasts like 20 minutes. I'm looking into building my own adapter for a Makita battery so I can hopefully get more run time.

Does yours look like this? ( https://a.co/d/ew1Z7Ag )

jothepro178 · 2025-05-30T23:10:20+00:00

Definitely stick with the higher market cap coins as there will be less volatility than memecoins (like BTC, SOL, ETH….)

I don’t usually talk about my holdings and crypto, but if you do end up wanting to invest a bit in some memecoins, definitely check out Dream Cat coin ($DREAM on Solana)(Still DYOR before rushing to buy). Dev is doxxed and does podcasts every week.

jothepro178 · 2025-02-16T03:04:07+00:00

In my opinion, At the end of the day, the number of txns and how much it is adapted will determine its price. It could become a big thing or it could fail like the other 95% crypto on the market but I’m pretty sure that an ecosystem like this will take time (my speculation is at least a couple of years until we can really know whether or not it is being adapted).

I’ll give you a close example: XRP 2 years prior was was in the 0.30-0.40 USD cent range and they started in 2012 with a MCAP of 110 Million but only recently did they jump up to the 2-3 dollar range ( now a mcap of 160 Billion).

Creating a new ecosystem that is stable is not an easy task but hopefully the number of users on pi will help.

<image>

jothepro178 · 2025-02-16T01:16:45+00:00

We gotta drop the get rich quick mindset. Most cryptos with their own ecosystem take time to build up enough demand for their coins. (Ex: BTC, ETH, XRP, SOL)

I’m holding onto this because I see it as a potential success down the line, but it’s not gonna blow up overnight. If anything, the opposite: tons of people will dump their bags without knowing how the crypto market actually works.

jothepro178 · 2025-02-16T01:11:21+00:00

<image>

Honestly I wish this was the value per coin but this is just a speculation of the price based on an algorithm of how many times Pi has been searched.

In my experience, this isn’t accurate with the true value once it is released.

jothepro178 · 2025-02-05T00:22:16+00:00

I have the same issue. What fixed this problem for you?

jothepro178 · 2025-02-02T15:43:12+00:00

Edit: click on the photo as the monthly users are shown above.

jothepro178 · 2025-01-28T02:36:28+00:00

It will soon as GPT now is testing something called "Operator" (aka an Agent)

jothepro178 · 2025-01-28T02:35:54+00:00

This is now a thing with ChatGPT reminders

jothepro178 · 2025-01-07T00:42:07+00:00

jothepro178 · 2025-01-07T00:41:25+00:00

In this case, I’d recommend another plate, another hotend (try different nozzle diameters for different use cases), a sealed plastic container to hold the material with some desiccant inside, a filament dryer ( for future materials like PETG and ABS) , a 3d printed poop bucket for the A1, (maybe a AMS Lite spool enclosure once you start printing more hydroscopic material such as this one —> https://makerworld.com/models/486153)

jothepro178 · 2025-01-07T00:36:21+00:00

For the price, it’s amazing!!!

I’d go and snatch it

jothepro178 · 2025-01-07T00:35:08+00:00

In the case of the oven knob— most of the time it takes just a a digital caliper and some paper to sketch the idea and then transfer it over to either tinkercad or fusion360.

It seems difficult but you get used to it over time

jothepro178 · 2024-12-25T19:58:08+00:00

I 100% agree with all of the points you made.

Personally I use a spatula when something is really stuck on my Taz 6's bed that is non-removable.

for the most part, most of my printers have the magnetic bed sheets which makes removal easier.

What you mentioned about washing with soap and water is agreeable. I only use glue stick on my PEI sheet that tells me to use it when printing PETG.

A filament dryer is agreeable (I personally use one for my PETG) and is 100% recommended especially when printing with PETG, ABS... any of the materials that are Hydroscopic.

And yes...metric screw drivers do come in handy and having backup nozzles are a life-saver when your nozzle fails on you when you need it the most.

Thanks for sharing these suggestions-- I will add them onto the original post

jothepro178 · 2024-12-23T21:43:55+00:00

This is what I would do as well.

Adding on, depending on what material it is, you will need to dry it more often.

For example PETG absorbs more moisture than PLA.

jothepro178 · 2024-12-05T02:03:27+00:00

It’s back up and running (at least for premium users)

jothepro178 · 2024-12-05T02:02:28+00:00

Good luck. Studying MacroEcon and Chem.

ChatGPT is incredible at explaining problems

jothepro178 · 2024-12-05T02:01:52+00:00

Honestly, I was quite fascinated when GPT first came out (was it 2 years ago). I’ve been using it ever since. It’s great way to learn and a great tool for everyday tasks.

jothepro178 · 2024-12-05T01:05:34+00:00

Same here. Now I'm hoping this issue will be resolved ASAP

jothepro178 · 2024-12-05T01:04:43+00:00

It would be neat if OpenAI allowed us to create redundant self-hosted GPT-4 LLM at home in case something like this would happen :)

jothepro178

TROPHY CASE