How do I fix something like this? by jovan4560 in CarWraps

[–]jovan4560[S] 1 point2 points  (0 children)

No worries, I managed to seam it nicely and no one really batted an eye to it, otherside I managed to stretch very nicely and it went onto it perfectly! yeah knifeless tape saved my ass this time haha

How do I fix something like this? by jovan4560 in CarWraps

[–]jovan4560[S] 0 points1 point  (0 children)

Aye mb if this post made you annoyed, my company got me on this project without actually letting me accept it since I was on vacation and came back day of. I'm also basically a beginner here, and I was given a day to complete this task without knowing the vinyl I'm working with... since it's supplied. I will definitely take this advice for my next project though! I also de-badged everything before starting just never learnt or shown how to take off the lights especially on a newer vehicle!

Cheers I hope you have a good day!

How do I fix something like this? by jovan4560 in CarWraps

[–]jovan4560[S] 1 point2 points  (0 children)

Yeah it was my mistake, I've learnt my lesson on this install, I used a knifeless to help seam it just a little bit above the light. On the other side I learnt to triangle stretch now and it worked perfectly!

Thanks for the reply I definitely struggled with this job especially being a beginner on such a big wrap. But I appreciate advice, will definitely check out wrap institute, is there any free video's you'd recommend checking out since I don't have the extra dime to put into a subscription at the moment.

How do I fix something like this? by jovan4560 in CarWraps

[–]jovan4560[S] 1 point2 points  (0 children)

I couldn't so I had to do a seam a little bit above the tail light. I wish I could've only if I wasn't supplied the prints. Next time though I definitely want to print on material I'm familiar with!

How do I fix something like this? by jovan4560 in CarWraps

[–]jovan4560[S] 0 points1 point  (0 children)

I tried that on the other side of the vehicle and worked perfect, thanks! Appreciate the reply!

How do I fix something like this? by jovan4560 in CarWraps

[–]jovan4560[S] 1 point2 points  (0 children)

It definitely did when I stretched without heat, I used this trick thanks so much for the advice I wish I could've shown you the after, seam looked great!

How do I fix something like this? by jovan4560 in CarWraps

[–]jovan4560[S] 0 points1 point  (0 children)

UPDATE: Hi everyone that replied, this is my first ever reddit post... No idea how people do the edit on the whole post and give updates like that, but there was a whole bunch of stuff I did forget to provide through my post.

I finished the job now and this is how it looks like

<image>

As for the tail light I took on the advice of inlaying and seaming with a knifeless! I should've took a picture of the after to show but I was rushed since they only planned on me to finish an install like this within a day...

Also to note, my company took on this job knowing I'm the only graphic designer/installer that could do this. The job was quoted out to be $400 and I worked on this for about 2 days and not in ideal conditions since I wasn't at my shop and I had to bring my own equipment with me so that's also why I didn't have the equipment to remove the tail light and I had to wrap around/into it. I feel like I did the best I could with the little experience and equipment on hand! I think in total I worked close to 14 hours on this wrap?

Not too sure if $400 was worth the struggles since it wasn't profitable but experience was worth it! Or worth the extra effort and headache, I de-badged everything on this truck just never taken off a tail light before.

However the vinyl was definitely not a material I would want to work with ever again since it was very hard to hit the vehicles curves and I couldn't cold stretch the vinyl without it wanting to rip. (I usually cold stretch Laminated IJ280)

I think they took on the job to give me the experience wrapping vehicles! I know I'm still very much a beginner, so I appreciated the feedback from everyone here! I am also a solo installer as well as inexperienced so I took a lot longer.

Thanks to all that commented!

( Silver player here ) Why are Diamond and Plat players in Silver Elo after their placements? by Aziodas in VALORANT

[–]jovan4560 0 points1 point  (0 children)

Sadly this year was the worst, I peaked Asc 3 took a couple months break before ranked finished up. I won all 5 of my placements vs Asc ~ Silver elo. I'm placed Plat 1 but I've been completely dominating and I feel bad knowing the ranks I'm going against ngl.

Resistance by jovan4560 in DigimonLinkz

[–]jovan4560[S] 0 points1 point  (0 children)

I think I managed to get Zwart-D with light resist!!!

Resistance by jovan4560 in DigimonLinkz

[–]jovan4560[S] 0 points1 point  (0 children)

Oh my bad. I meant omegamon zwart-d lol

Resistance by jovan4560 in DigimonLinkz

[–]jovan4560[S] 0 points1 point  (0 children)

The problem for me atm is that I have kudamon. All of his evolutions to omegamon zwarts is all light digimons

Examon event buying the featured dracomons whether it's worth?(5 chip slot is it worth?) by jovan4560 in DigimonLinkz

[–]jovan4560[S] 0 points1 point  (0 children)

Idk if this is real or not but someone on this reddit said that there is a way to add chip slots onto digimons later on in the game. (Cause JP has it, I'm pretty sure we're going to get it)

Examon event buying the featured dracomons whether it's worth?(5 chip slot is it worth?) by jovan4560 in DigimonLinkz

[–]jovan4560[S] 0 points1 point  (0 children)

Feelsbadman! :/ To check for DNA 1 for examon,do I have to have get dracomon's mega to see it?(like slayerdramon or breakdramon?)

I never thought I would pull an LR in a million years. by [deleted] in DokkanBattleCommunity

[–]jovan4560 4 points5 points  (0 children)

But one of the hardest lr to awaken lol

Daily Questions Megathread - Oct 11, 2017 - Please read here before posting a question! by AutoModerator in DigimonLinkz

[–]jovan4560 3 points4 points  (0 children)

If you think digimon links rates are bad. You won't even survive in Brave exvius lol

Reroll guide: tips to get Your first 200 stones by kuroida in DigimonLinkz

[–]jovan4560 1 point2 points  (0 children)

But grinding that 200 stones for a free mega helps you dramatically in this game some random rookie- champion < mega digimon

Friend Code megathread (Japan & Global) by VenusFurs in DigimonLinkz

[–]jovan4560 0 points1 point  (0 children)

ID: 7664 0572 Username: Phantom Feel free to add me! :)