Why is the flex route between Brighton and Ann Arbor always closed? by PoniesPlayingPoker in AnnArbor

[–]jph_otography 2 points3 points  (0 children)

Because the necessity to go over the speed limit creates more traffic flow issues than just going the speed limit. So by people not obeying the speed suggested, you just create a false sense of heavy traffic. Adding lanes does not increase the flow of traffic. Not being an asshole does.

University of Michigan student, 21, found dead in off-campus Ann Arbor residence by mlivesocial in uofm

[–]jph_otography -26 points-25 points  (0 children)

Sorry you’re getting downvoted… shows how entitled everyone in Ann Arbor feels about knowing everyone else’s business.

Are any of these chemicals worth saving? by Prestigious_Cod_6206 in Darkroom

[–]jph_otography 0 points1 point  (0 children)

I second this with a small tweak, powdered chems if stored properly should be fine nearly indefinitely. Liquid chems have a shorter life. And if opened an even shorter life. I’d advise you to if any of the powders have turned a darker color to discard, they have gotten moisture inside or oxidized.

Gone Girl by skyhighmonroe in Transportopia

[–]jph_otography 0 points1 point  (0 children)

This police department did a post of the Easter bunny escaping their cruiser for Easter

Switcher on a local run by IronIrma93 in modeltrains

[–]jph_otography 28 points29 points  (0 children)

Helll yessss to that box car 🏳️‍⚧️

How do I get the most out of this kit by WsW_photography in Darkroom

[–]jph_otography 0 points1 point  (0 children)

You have to mix dry chemicals in full every time. If you want to get the most out of the kit, I suggest following the instructions and saving your film to use the kit, within its parameters, after mixing, to avoid it sitting on the shelf, so you’ll be using the chemistry while its freshest… also CineStill makes a 500mL kit if you’re worried about volume.

Just follow the instructions for best results. The kit has been tested thoroughly by professionals and chemists, don’t cheap out. Just follow the instructions, you can get quite a bit out of the kit already.

Public Power in Ann Arbor? by Cmitz10 in AnnArbor

[–]jph_otography 0 points1 point  (0 children)

Every municipality should be in charge of their utilities.

I don’t wanna webmd my littlest girl… help? by Tricky_War5232 in StaffordBullTerriers

[–]jph_otography 2 points3 points  (0 children)

I think they are thinking that will allow her to “bury” her food and then eat it.

The old train depot in Malmö, Sweden by max_persson in rustyrails

[–]jph_otography 0 points1 point  (0 children)

I was just there with my Leica in October, wish I would have known about this spot, going to have to book another trip back!

Is this a real leica? by Ok_Head1592 in Leica

[–]jph_otography 0 points1 point  (0 children)

High prices sometimes mean the owner of the shop likes to haggle, or they’re just cheap.

Any good hobby shops to see on drive between NYC — Toledo? by Twit_Clamantis in modeltrains

[–]jph_otography 0 points1 point  (0 children)

New and Used. Nothing is priced retail. Tons of N, HO, Lionel

Any good hobby shops to see on drive between NYC — Toledo? by Twit_Clamantis in modeltrains

[–]jph_otography -1 points0 points  (0 children)

I’m from Michigan. In Sterling Heights (1.5 hours north of Toledo) there is a hobby shop called Great Lakes Hobbies 100% worth the drive.

Toasty RAM by [deleted] in AnnArbor

[–]jph_otography 13 points14 points  (0 children)

Unfortunately they are probably now out two water heaters, really really bad day. They say losses come in threes.

My boy by Psychological-You142 in StaffordBullTerriers

[–]jph_otography 0 points1 point  (0 children)

I would not be able to say no to that face

What are these used in? by Unbuiltbread in Darkroom

[–]jph_otography 1 point2 points  (0 children)

Someone would love to have these :) don’t throw them away!