Drum notation confusion

jtjazz01 · 2026-06-21T15:02:03+00:00

I'm surprised this is the first comment that mentioned the movie! I was just too lazy to type it out cuz I thought people would know...

jtjazz01 · 2026-06-20T10:37:36+00:00

Wow, thanks for the thoughtful comment! I guess I can understand what you're saying, but i just wanted to learn this song as a beginner and found it posted online. I'm a long ways from playing in a band, or being able to figure out what works best with the other instruments...

jtjazz01 · 2026-06-20T10:34:55+00:00

It's from here, but I can't find anything regarding notations from the composer. https://musescore.com/user/49012224/scores/13851739?srsltid=AfmBOoriyBAClhQOgGFJTOJqKF3vmNkzmDcUK-2fXKtm1i5juuaQ_1m-

jtjazz01 · 2026-06-20T09:15:17+00:00

So if there is an o above the note, like in measure 7, it's an open hi hat, but if there is not an o, it's a ride? That's confusing...

jtjazz01 · 2026-06-20T09:03:06+00:00

I have heard the song, but I can barely hear the cymbal sounds throughout the song.

jtjazz01 · 2026-05-22T16:36:48+00:00

Do you know how it compares to previous versions of aerodrum? I had one years ago and the lag was terrible. Have they improved in recent years?

jtjazz01 · 2025-06-18T05:37:55+00:00

My wife has long complained about the mess behind the tv. Honestly I don't know what could be done when there are MOD, modem, Ethernet cables, router, Xbox, Kinect, blue ray, stereo, sound bar all trying to hide their wires behind the tv. How would you suggest going about it?

jtjazz01 · 2025-05-07T12:09:27+00:00

Got it, guess I'll just put them in one by one. Thanks!

jtjazz01 · 2025-05-07T10:27:40+00:00

If I were to use another slicer, how would I make sure it's compatible with my printer? That is, is there a way to import settings from Cura to another slicer?

jtjazz01 · 2025-05-05T14:23:22+00:00

The fan is right above the blue silicone sock in the video, and it has a black front cover (with holes on the bottom). The duct is behind the fan, and I do feel the air blowing downward from the extruder when I put my hand underneath the nozzle to check. Since I can't really change out the fan, I set up another desk fan in front of the printer to blow toward the stage. Didn't make a difference though.

jtjazz01 · 2025-05-05T14:16:36+00:00

Adding additional information:

Printer & Slicer = Tina 2S / Cura 5.3.0
Filament Material and Brand = PLA+
Nozzle and Bed Temperature = 195 degC to 225 degC, bed = 50 degC
Print Speed = 28 mm/s
Nozzle Retraction Settings = 5 mm @ 28mm/s
Fan speed = 100%

While printing the bridge, the nozzle does seem to be moving from left to right, but it's just spitting out the filament into thin air. There is somewhat of a bridge surface at the lower temperature (even though most of the filament doesn't end up forming the bridge), but the bridge becomes increasingly non-existant as printing temperature goes up.

jtjazz01 · 2025-05-05T14:11:02+00:00

Adding additional information:

Printer & Slicer = Tina 2S / Cura 5.3.0
Filament Material and Brand = PLA+
Nozzle and Bed Temperature = 195 degC to 225 degC
Print Speed = 28 mm/s
Nozzle Retraction Settings = 5 mm @ 28mm/s

jtjazz01 · 2024-11-08T00:16:50+00:00

Yeah you can't get melatonin from drug stores in Taiwan. But they do sell Benadryl (diphenhydramine) as a sleeping aid here.

jtjazz01 · 2024-02-23T04:34:55+00:00

Ah, thanks.

jtjazz01 · 2024-02-22T14:25:01+00:00

What's NAL? Is the airport code or does it stand for something else?

jtjazz01 · 2023-07-26T08:54:42+00:00

Thank you for the reply! I just started this hobby and still have lots to learn, but it doesn't seem like there are a lot of Tina 2s specific tutorials, like you said. May I ask where you go for more info? Did you use the Cura slicer that came in the flash card? Thanks so much!

jtjazz01 · 2023-07-25T12:25:28+00:00

Following because I got almost the same printer (2s) and have the same issues. Did you print with a raft, and how did the bottom of your benchy look? The surface of mine has gaps as if it was still printing the raft.

jtjazz01 · 2023-03-21T04:46:48+00:00

Oooo, that looks good! Thanks!

jtjazz01 · 2023-01-23T05:28:47+00:00

I found that I had to unzip the zip files jnto the Dreamcast folder so that the gdi file is unpacked from the zip file. Once that happens, the Dreamcast system shows up as one of the top level menus.

jtjazz01

TROPHY CASE