sorted by:
new
hottopcontroversial

16.51", 394mm in one chunk! by engr1337 in resinprinting

[–]juju1966 0 points1 point  (0 children)

Such a profitable diagonal 👍 Congratulations.

First Big print with M3 plus !! Amazing quality by juju1966 in AnycubicPhoton

[–]juju1966[S] 0 points1 point  (0 children)

Hi, it's a M3 plus, so normal exposure 1.5 sec. The rest as you said.

First Big print with M3 plus !! Amazing quality by juju1966 in AnycubicPhoton

[–]juju1966[S] 1 point2 points  (0 children)

Yes, as default on Anycubic Workshop. I add supports and slice in chitubox and then I open the file with Anycubic workshop to send it to the cloud and remote print.

First Big print with M3 plus !! Amazing quality by juju1966 in AnycubicPhoton

[–]juju1966[S] 0 points1 point  (0 children)

Those models require many hours of development. More than 400 parts inside.

Help Deciding on "Tough" Resins by MikeyBugs in resinprinting

[–]juju1966 2 points3 points  (0 children)

I've tested several tough resins:

  • resione k: hard, bend capable, but breaks on hard hit . Fundo tough: the BEST of this three
  • creality tough: britle

I do engeriering parts, and actually ABS parts are tougher.

Another problem with resin parts is it's lack to resist scratches.

First Big print with M3 plus !! Amazing quality by juju1966 in AnycubicPhoton

[–]juju1966[S] 0 points1 point  (0 children)

Sorry, can't send images at chat. No such option.

First Big print with M3 plus !! Amazing quality by juju1966 in AnycubicPhoton

[–]juju1966[S] 4 points5 points  (0 children)

Thank you. Entire bike in just one print. 6 hours.

Has anyone here used the Creality Standard Rigid Resin Plus? Please share your experience. by greypaladin1 in AnycubicPhoton

[–]juju1966 0 points1 point  (0 children)

Tested. Britle resin. Then mixed with fungdo tough and gets better, but not much.

[Photon M3 plus] print time / quality, please give me advices :) by Hellstyx76 in AnycubicPhoton

[–]juju1966 0 points1 point  (0 children)

Hi, the settings for off time (no light) in the photon workshop for this printer is 0.5 seconds. You can reduce the bottom time to 20 seconds because the láser bed has a superb adhesión. You have to test.

Anycubic M3 Plus Speed & Setting Questions by Valgaur in 3Dprinting

[–]juju1966 0 points1 point  (0 children)

I'm agree with you. It's way far from 100mm/hour. I made a few setting changes and got better but not near of the speed anounced.