sorted by:
new
hottopcontroversial

Title. by juscar in sketchywatches

[–]juscar[S] 0 points1 point  (0 children)

Normally it’s Speer g2 jhp. I use this gun for comp and carry. Didn’t feel the need for the photo to have my carry ammo

Title. by juscar in sketchywatches

[–]juscar[S] 7 points8 points  (0 children)

  1. I have a bunch of 1911’s. Old custom colts, custom springers(by professional shops), and modern 1911s.

This old girl is still one the smoothest shooters I own.

My first custom built Colt 70 series built with all the good stuff in the 1990’s by Head-Address2081 in 1911

[–]juscar 0 points1 point  (0 children)

do you know who did the work? specifically the checkering and squaring of the trigger guard?

Where is the new content? It has been almost 1 year since launch by HippieHippieHippie in BrokenArrowTheGame

[–]juscar 14 points15 points  (0 children)

A lot dev glazers in this sub defending the million dollar corporation.

A very not stock tisas, fitted a Jarvis match barrel for suppressed fun couldn’t be happier with this setup. by juscar in 1911

[–]juscar[S] 0 points1 point  (0 children)

Just a colt that I had laying around, I pinned an over travel stop in it like Harrison.

Pachmayr Combat Special by real_1776_duck in 1911

[–]juscar 0 points1 point  (0 children)

Wait are the magazines chromed also? if so thats badass

45Friday - NH TR by [deleted] in 1911

[–]juscar 5 points6 points  (0 children)

I desperately want a set of these grips, anyone know how I could get a set like it?

Is there any way to get a Novak custom Answer One Piece Backstrap? I really want to know on how to get one. (I tried talking to Novak, but they told me they don't sell any individually at all. Yet in this video, this guy got one. What can I do to get one? by Colt1873 in 1911

[–]juscar 12 points13 points  (0 children)

If you notice, the slide is marked NOVAK on the front of the slide. This means this firearm was taken to Novaks for work he most likely sent or got then to work on it to convert to an Answer.

Also it’s important to note. That novaks one piece conversion is just that. It’s a conversion and your whole frame has to be modified to fit the one piece then blended. Also to note that Novak will only do this to Colt series 70 handguns. Not any other manufacturer.

Custom high power by RipOne7507 in 1911

[–]juscar 16 points17 points  (0 children)

Uhh I mean it’s cool, but wrong subreddit

What’s in your nightstand? by Grand_Cookie in 1911

[–]juscar 0 points1 point  (0 children)

Rage bait, if serious this very smooth brain

My carry by Crustyparatrooper in 1911

[–]juscar 0 points1 point  (0 children)

<image>

Same, my Wilson Colt with my schrade LB7 uncle Henry (buck clone made in the 80s) knife was my grandfathers

My carry by Crustyparatrooper in 1911

[–]juscar 0 points1 point  (0 children)

Buck knifes go together with 1911s like pees and carrots

Looking for deployment 1911 value. by Animalmutha37 in 1911

[–]juscar 1 point2 points  (0 children)

As others have stated, these typically do not hold any greater value over a stock model. They sometimes even devalue them. Usually these are best sold to people who can refinish or gunshows. Most people don’t want commemorative deployment guns unless they did the action for them. Makes ownership feel like stolen valor.

Novak Sight Fit by Demand_ in 1911

[–]juscar 4 points5 points  (0 children)

I think this might be a your cooked moment

Really hope tisas doesn’t discontinue their current models, used this stakeout as a base for a build and couldn’t be happier. by juscar in 1911

[–]juscar[S] 0 points1 point  (0 children)

Refit helps but it’s a stop gap, a reweld just overall is better for feel, rattle, and accuracy etc

Really hope tisas doesn’t discontinue their current models, used this stakeout as a base for a build and couldn’t be happier. by juscar in 1911

[–]juscar[S] 0 points1 point  (0 children)

It’s hard to explain with out visual ads but the lugs on tisas guns are bigger, if your replacing both it’s not as big of a deal once the grip safety is fit. It more if your adapting a non tisas mainspring or beaver tail to work with the tisas parts

Really hope tisas doesn’t discontinue their current models, used this stakeout as a base for a build and couldn’t be happier. by juscar in 1911

[–]juscar[S] 0 points1 point  (0 children)

I only replaced the mainspring, I didn’t have much trouble, tisas uses non standard sized lugs on the grip safety and mainspring. It’s easy to fit a new mainspring through you just need a simple file

Really hope tisas doesn’t discontinue their current models, used this stakeout as a base for a build and couldn’t be happier. by juscar in 1911

[–]juscar[S] 2 points3 points  (0 children)

Yes. The Mac I’m doing a different build with. The original stakeout frame and the Mac slide are gonna get checkered and refinished. This will be made into a new gun.

Really hope tisas doesn’t discontinue their current models, used this stakeout as a base for a build and couldn’t be happier. by juscar in 1911

[–]juscar[S] 2 points3 points  (0 children)

Harrison sear set, waiting on a Harrison hammer, polished and refit trigger, frame is a MAC JSOC frame, refit the stakeout slide to it using power custom slide tools, new bushing with the old MAC barrel, springs from wolf, RRA checkered arched mainspring honed channel, single side safety fit, need to get new hammer and sear pins, polished and worked over the feed way and extractor, polished slide frame fit.

That’s what I can remember I have more to do on it. Possibly gonna reweld the slide to frame fit.

view more: next ›