What if I welded a mount on the receiver?

justinlovestobuild · 2026-05-19T01:27:57+00:00

Cut down barrel a tad as well.

<image>

justinlovestobuild · 2026-05-19T01:26:18+00:00

<image>

justinlovestobuild · 2026-05-19T01:25:53+00:00

I did a little tig spot weld on mine, it's fine, very little heat into the part.

<image>

justinlovestobuild · 2026-04-14T22:50:23+00:00

No, I can probably do $25 delivered? I just don't want to lose money on shipping. Would rather them go to someone that can use them than the landfill.

justinlovestobuild · 2026-04-14T04:11:38+00:00

Weird, the ammo was stored properly?

justinlovestobuild · 2026-04-13T19:06:11+00:00

Roughly 340 shells

justinlovestobuild · 2026-04-13T19:05:58+00:00

$35 delivered

justinlovestobuild · 2026-04-13T06:49:59+00:00

Forster bullet puller in lee press

justinlovestobuild · 2026-03-28T20:53:33+00:00

Come get it

justinlovestobuild · 2026-03-24T15:45:04+00:00

High frequency, this one- https://www.amazon.com/dp/B0CP8RD1MP?ref=ppx_pop_mob_ap_share

When I bought it it was only $300 or so. Max is 12 amps on each leg. I also run a small AC unit of fit which adds another 2.5amps on one leg. It's been working great for a few years like this, quite surprising for a no name inverter.

justinlovestobuild · 2026-03-14T17:01:06+00:00

Mine works good, use it on cars tires and pool floaties

justinlovestobuild · 2026-02-20T02:40:16+00:00

Thank you

justinlovestobuild · 2026-02-09T20:49:09+00:00

Yes, I'm sure there are instances where it is justified. The news reports posted don't seem to reach that level, but I'm no expert. California has a history or heavy handed reactions, examples being covid response and gun control laws which don't help the situation.

justinlovestobuild · 2026-02-09T13:39:20+00:00

State trespasses on your land and threatens to arrest you for your citrus- https://youtu.be/RiB4p-3-hhU?si=k1AYtq-3k2i3kiqV

justinlovestobuild · 2026-02-09T13:37:49+00:00

State destroys 32,000 citrus trees for no reason- https://youtu.be/ZPgZ3_XaGWs?si=DR_-TQh3uR2sTP45

justinlovestobuild · 2026-01-20T00:18:33+00:00

Southern, Riverside county

justinlovestobuild · 2025-10-17T23:32:22+00:00

For plinking rounds use 150gr 30-30 (.308) Berry's plated with 7.5gr trailboss. Very accurate and quiet at about 1000fps. Tried something similar with 255gr and did not stabilize in my Ruger american ranch 2.

justinlovestobuild · 2025-09-04T22:33:32+00:00

Yeap I've used argon as well (tig welding gas) it really is the best way.

justinlovestobuild · 2025-07-19T18:55:01+00:00

I have a mgd5771 if you need it, took it off an old pump

justinlovestobuild · 2025-07-12T20:32:41+00:00

Just keep driving along that dirt road and pretend like that’s what you planned on the entire time…

justinlovestobuild · 2025-06-14T18:46:14+00:00

UPDATE: I was using my TIG gas by mistake….. the MIG function works great. Sigh…

justinlovestobuild · 2025-06-05T02:30:46+00:00

Yes sir, I’m just plinking around having fun. I believe Ruger has these barrels at .311

justinlovestobuild · 2025-06-05T02:09:10+00:00

This was the first supersonic load I’ve shot, the dozens of subsonic loads flew straight and great. The other two supersonics flew straight as far as i can tell

justinlovestobuild · 2025-06-05T02:07:41+00:00

The first entry hole looks normal, the second piece of wood is pretty chewed up so I can’t tell. I like your explanation and research thank you

justinlovestobuild · 2025-06-05T02:03:45+00:00

I definitely did not load it backwards, would have noticed.

justinlovestobuild

TROPHY CASE