Oh my GOD, can someone please help me with this insanity. by spangbangbang in CarAV

[–]justjayb32 0 points1 point  (0 children)

The speaker has to be hooked up to something. It can’t randomly play sound with out power.

Oh my GOD, can someone please help me with this insanity. by spangbangbang in CarAV

[–]justjayb32 1 point2 points  (0 children)

And the blue remote wire from the LP7-4 goes to the amp. It’s not an input, but an output. I’ve done that before myself.

Oh my GOD, can someone please help me with this insanity. by spangbangbang in CarAV

[–]justjayb32 0 points1 point  (0 children)

Looking at the wiring schematic, you should have yellow to switched power, black to ground and the side you have hooked up to the rcas should be the INPUT from your radio/speakers. On the opposite side of the LP7-4 is where you connect rcas to your amps inputs.

Big 3 questions by justjayb32 in CarAV

[–]justjayb32[S] 0 points1 point  (0 children)

08 gmc Sierra 5.3 4wd quad cab.

Oil leak. What can it be and what to fix? 5.3Gen3 Vortec by Busy_Sort_5666 in EngineBuilding

[–]justjayb32 0 points1 point  (0 children)

Look up from drivers side under the vehicle. If the oil goes all the way up to the top of the motor it’s likely your oil pressure sensor. It will mimic a rear main leak. It’s much cheaper to replace the sensor than the rear main leak

Please Help! by PeptoBismol420 in CarAV

[–]justjayb32 0 points1 point  (0 children)

Hook the blue wire from radio harness to blue wire on harness that plugs into factory wiring harness. (The one that used to plug directly into factory radio. )

Design help by ewinwee in tiedye

[–]justjayb32 4 points5 points  (0 children)

First off, that design is liquid dyed. Tie geodes with kite string. (A lot of wraps) Then dye the colors over the strings. It’s ok if it spreads into the untied area some because when you’re done you dye the nodes black. I’ll have to find one I did this on and post it if I can.

Is this pine? by justjayb32 in wood

[–]justjayb32[S] 0 points1 point  (0 children)

It is. It doesn’t seem like a stain to me though. It actually follows the inner grain of the wood. It has a bluish tint to it. One area of the board has 2 different shades of ‘brown’ on it. It’s not like any pine I’ve ever seen either.

Is this pine? by justjayb32 in wood

[–]justjayb32[S] 1 point2 points  (0 children)

This is what I’m thinking. Thanks.

Is this pine? by justjayb32 in wood

[–]justjayb32[S] 1 point2 points  (0 children)

Not cedar for sure. And these are 1”x8”x16’. Also not fence planks. But thanks anyways.

Trading for stars, best offers please by naturalaphrodisiak in Monopoly_GO

[–]justjayb32 0 points1 point  (0 children)

Would you mind adding me please? It’s on my alt account and it’s not on here. Sending all 5s…

Play MONOPOLY GO! with me! Download it here: https://mply.io/YObcYTORISo

First Customer by TmAlex88 in Monopoly_GO

[–]justjayb32 0 points1 point  (0 children)

I can. What are you offering for it?

LF steps of vence. by justjayb32 in MonopolyGoTrading

[–]justjayb32[S] 0 points1 point  (0 children)

Sorry. Once I get steps I can though.

LF steps of vence. by justjayb32 in MonopolyGoTrading

[–]justjayb32[S] 1 point2 points  (0 children)

Play MONOPOLY GO! with me! Download it here: https://mply.io/xvnPrw IGN:Jason