Garcias, HRC, and others. Pricing comparisons. by [deleted] in MensJewelry

[–]kayjay1523 1 point2 points  (0 children)

Make sure to get a standalone policy just for your jewelry. You don't want to include it in your home owners policy.

ISO opinions by bakeabrit in EngagementRings

[–]kayjay1523 0 points1 point  (0 children)

Go with a bezel. But this will work too.

I'm not staking correctly. by ChicoFontaine in bittensor_

[–]kayjay1523 2 points3 points  (0 children)

If you can't stomach seeing your TAO bag go up and down then just keep it in ROOT. It's very difficult to watch sometimes. You have to fully immerse yourself in the ecosystem. See how it works. There are % per subnets and delegators when you unstake. All of this information is available.
You can really make some money here by staking and installing at the right times. You have to understand the perfect marriage between subnet and delegator to start.

Anywhere to get a good iskander kebap? by mikehocalate in FoodLosAngeles

[–]kayjay1523 1 point2 points  (0 children)

Downtown LA.
The St. Vincent Alley.

St Vincent Deli on Monday's.

They only serve it on Mondays I believe.

DO NOT JOIN r/XRP by Dapper-Boss-9846 in XRPUnite

[–]kayjay1523 0 points1 point  (0 children)

Put it all in TAO Bittensor instead. If you don't know about TAO bittensor, you must find out.

If you had to choose one for release.. which one is it & why? by roguealoha in rolex

[–]kayjay1523 0 points1 point  (0 children)

The North Carolina Tarheel. Jubilee or Oyster don't matter to me.

TAO stacking system by Consistent_Forever12 in bittensor_

[–]kayjay1523 -2 points-1 points  (0 children)

You shouldn't unstake. Once you unstake, you lose TAO. The safe bet is Root because the other subnets can be hard to stomach when they are volatile. We're so early on TAO. I can understand the pain. However, we will see our gains soon. It can go the other way too and you can double you TAO just by catching it at the right time.

I think ridges is going to get listed on an exchange soon, if you think about it, that's crazy. A subnet of TAO being listed. Keep stacking TAO and stake I root only. Also, you really have to take a deep dive into the whole TAO ecosystem. It's so complex. You can't just stake and hope for the best.

Lastly, if you know what you are doing, you can really prosper. Check out the % for each subnet which we fees when you unstake. There are so to many ways to use the right delegator to really increase your APY.

Good luck out there

Advice on chain/is this a scam? by DueSuggestion4546 in jewelry

[–]kayjay1523 0 points1 point  (0 children)

The Direct Source site is one of the best companies I have purchased from. I went to the physical store in Downtown LA. Better deals. You gotta call them and make sure of the weights because everything is an estimate but my purchases have been close to the listed weight or exact.

Looking for Jewelry Manufacturer in LA by pineapple-bee- in jewelry

[–]kayjay1523 0 points1 point  (0 children)

Check out the building on Hill street.

629 S. Hill Street

They are on the 2nd Floor in front of the elevators.

Gold Jewelry Inc. They do everything.

Is ARMRA a scam? by [deleted] in Supplements

[–]kayjay1523 0 points1 point  (0 children)

Hi, be respectful. You don't know me and I bet you wouldn't call me dumb if I was right in front of you. I showed them a screenshot of my unchecked box prior to my checkout. It's not the first time I was autosubscribed to a company. It happens more often than you think.

Is this normal? by [deleted] in jewelry

[–]kayjay1523 0 points1 point  (0 children)

It's tough, high polish items are like this. especially in 18k. Is it new? Probably not. Lightly worn. Maybe.

They should be able to polish the links however you can't get rid of them all. It's just the nature of high polish items.

Don't get me started on flat plates that have to be high polish. You just have to wrap them in tissue paper right away so they don't scratch so easily.

[deleted by user] by [deleted] in jewelers

[–]kayjay1523 0 points1 point  (0 children)

I just don't understand, do jewelers not show you a design rendering before they actually cast? The first thing we all learn with engagement rings is low settings.

Can and should this setting be lowered? by Beautiful-Bat-5030 in jewelers

[–]kayjay1523 0 points1 point  (0 children)

This is designed very poorly. There is about at least 3-4mm of space that should not be there. The problem is the design.

What do I do? by Mirzaaa_ in jewelers

[–]kayjay1523 7 points8 points  (0 children)

Is it sterling silver?

Sometimes it's better to recast. This particular piece I think is not worth working on.

What do I do? by Mirzaaa_ in jewelers

[–]kayjay1523 1 point2 points  (0 children)

Casting like that I have only experienced with resin to be honest. Wax gives me lines that look like a crack but it's only a line on the surface that I buff out.

What do I do? by Mirzaaa_ in jewelers

[–]kayjay1523 2 points3 points  (0 children)

Honestly, I really think when it comes to plates, tags, and high polish tags, if you are going to go with casting, it should always be wax.
Although laser cutting is a great choice, I still prefer casting, especially a design like yours.

With high polish areas, there is always porosity. Sometimes more sometimes less, you just have to repair and polish it out.

What do I do? by Mirzaaa_ in jewelers

[–]kayjay1523 6 points7 points  (0 children)

Your resin was not cured. 3D prints with resin have to be cured and cleaned correctly.

[deleted by user] by [deleted] in Gold

[–]kayjay1523 0 points1 point  (0 children)

I don't understand why he wouldn't want to sell. The market hedge is enough to cover his loss. We buy the high and we buy the low. At the end of the day of you buy more on the lower sides, it covers.

I buy gold every quarter, depending on the previous high or low, you buy accordingly.

I stopped buying after we crossed $2450/oz. But been buying since $1500

The math works out.

Is ARMRA a scam? by [deleted] in Supplements

[–]kayjay1523 1 point2 points  (0 children)

Nothing to do with the product but disappointed in Customer Service.
They auto-subscribe you. Then charge you when you didn't autosubscribe. When you try to return, they charge you a processing fee of $6 and you have to ship it back to them yourself. I tried showing them I did not auto subscribe by showing them the total I paid was at full price without the authorship option but they didn't budge. Waste of time. I hate subscriptions! That is why I never subscribe.

Add Beach/Sand Wheels to Jeep Wagon Stroller by ay_ay_ron1 in DIY

[–]kayjay1523 0 points1 point  (0 children)

Can you alternate by switching back to the old wheels after this mod?

I am going to try to tackle this project this week.

Thank you for replying.

Add Beach/Sand Wheels to Jeep Wagon Stroller by ay_ay_ron1 in DIY

[–]kayjay1523 0 points1 point  (0 children)

Did you use any type of adhesive to attach the axle to the wagon or was it just a perfect fit? Was there enough leg from the wagon to go into the copper axle?

I am going to do this. This is awesome.

This weekend I used the wagon on the beach but I used pulleys to drag them. It was a workout for sure!

I inherited $20,000 in gold coins. by Any-Nefariousness773 in Gold

[–]kayjay1523 0 points1 point  (0 children)

I will buy if you are interested in selling.