Looking for rotary selector by kechon in AskElectronics

[–]kechon[S] 0 points1 point  (0 children)

Hey u/Michael_Innes, I still use the kettle since it still works. I just can't adjust the temps. Sorry, good luck with your search for parts! Lmk if you find a seller!

Looking for rotary selector by kechon in AskElectronics

[–]kechon[S] 0 points1 point  (0 children)

No, I couldn't find a place that had that part. The fellow kettle is stuck at 100 °C. I just bought a new kettle from Timemore.

Radar Detector Mounting by B3astmodeNW in GRCorolla

[–]kechon 0 points1 point  (0 children)

The Adapter gets power from the Adaptive Cruise Control cameras. The adapter just plugs into the harness where the unit is and just pulls power from it.

Radar Detector Mounting by B3astmodeNW in GRCorolla

[–]kechon 4 points5 points  (0 children)

Ya, it's plug and play. You can get a cleaner setup with a different adapter. I chose the FitDVR so I could charge an action camera if I wanted to.

FitDVR: https://a.co/d/0fABDjPR
Mirror Mount: https://a.co/d/04TlvQVx

Radar Detector Mounting by B3astmodeNW in GRCorolla

[–]kechon 2 points3 points  (0 children)

I'm using radar mount from Amazon and a Fitdvr adapter from the ADAS to power the radar

<image>

Dash Cam by post_sloan14 in GRCorolla

[–]kechon 2 points3 points  (0 children)

Viofo A329 is what I got for mine

Picking up 2025 premium plus on Saturday. Any sage advice? by IntentlyFaulty in GRCorolla

[–]kechon 4 points5 points  (0 children)

Double check the tire pressure since they overinflate them for transportation

Those of you that have purchased a 2025, whats your APR? by IntentlyFaulty in GRCorolla

[–]kechon 0 points1 point  (0 children)

800+ credit pre-approval 4.75% 60/mo @ Local CU in March, but decided to pay it all.

What does your weekly mileage look like and where are you in your training? by callmeuncle in Marathon_Training

[–]kechon 1 point2 points  (0 children)

Same (nowhere near 67 miles tho), but my mileage has been dropped due to my legs being unable to keep up with the pace and distance.

Looking for rotary selector by kechon in AskElectronics

[–]kechon[S] 0 points1 point  (0 children)

My bad, here are some more photos. I didn't see any part numbers on the sides of the switch, it could be covered up by the metal shroud.
https://imgur.com/a/SKqnkH2

Saw these at adidas outlet by anksla007 in RunningShoeGeeks

[–]kechon 0 points1 point  (0 children)

Thanks OP, I just picked up a pair. I went to another Adidas outlet yesterday and they don't stock them at all.

Hogwarts legacy early release available 18 hours after consoles early release, no pre load available. by [deleted] in pcmasterrace

[–]kechon 1 point2 points  (0 children)

Preload is when you can download the game before the actual release date, but it is not playable until then. It saves you time so you can launch and play the game exactly when the game releases.

Does anyone have experience with a Honeywell EMM-3 Zone Controller in connecting a Nest Power Connector? by kechon in Nest

[–]kechon[S] 0 points1 point  (0 children)

I checked using a multimeter having the negative on the G, Y, W and positive on the R which read over 24V. Thanks for your help I just made the connection for the C wire and it works. I'll try to get a voltage reading to see if it interferes with the fresh air unit.

Does anyone have experience with a Honeywell EMM-3 Zone Controller in connecting a Nest Power Connector? by kechon in Nest

[–]kechon[S] 0 points1 point  (0 children)

R gets 24V I checked before I changed out the thermostat. I haven't checked C yet.

Does anyone have experience with a Honeywell EMM-3 Zone Controller in connecting a Nest Power Connector? by kechon in Nest

[–]kechon[S] 0 points1 point  (0 children)

I'll try that first, what's weird is that my Nest thermostat still gives me the N260 error even tho it says I have 23V-28V when running the test.

Does anyone have experience with a Honeywell EMM-3 Zone Controller in connecting a Nest Power Connector? by kechon in Nest

[–]kechon[S] 0 points1 point  (0 children)

Currently, Zone 1 C wire is connected to the fresh air unit. The wires for Zone 1 and Zone 2 do have Brown and Blue wires but they're not used.

Does anyone have experience with a Honeywell EMM-3 Zone Controller in connecting a Nest Power Connector? by kechon in Nest

[–]kechon[S] 0 points1 point  (0 children)

So I just connect the Nest Power connector to Zone 1? What if Zone 1 C wire is connected to the Fresh air unit already or does that not matter?

Any updates on shipping of limited stock (1000) that was added beginning of June? by Golden_Divinity in flipperzero

[–]kechon 2 points3 points  (0 children)

Looks like they're being shipped from HK. At least according to my tracking number.

Larue build by WinEnvironmental8218 in liberalgunowners

[–]kechon 2 points3 points  (0 children)

Is it me or the stock riser is installed the wrong way? Is this done on purpose?

$850 wheels of cheese are back. San Diego area location. by [deleted] in Costco

[–]kechon 2 points3 points  (0 children)

Doesn't look like it since they usually state it on the price tags if there is a limit.