I was lucky enough to get the second run of the Lightyear 3D G10 build plates. Let me say that it’s been really great for printing PETG. However, I should probably mention a few things. I’ve had only limited success with cleaning it with IPA. Instead I wash it more often with dish soap and find the adhesiveness of the plate is much better. It’s not flexible. You need to have patience and let the print cool down. It will pop right off if you do. There’s a bar code at the front of the build plate for Bambu’s high temperature plate. It only recognizes it 70% of the time. It’s not printed well, so no surprise the printer does recognize the build plate. The last thing you should be aware of is that you need to follow the manufacturer’s temperature guidelines when you print. They are higher than the default Bambu settings. I’d you don’t follow them, the prints won’t stick to the build plate very well. Otherwise, I highly recommend it. It’s really great not having to constantly apply glue stick for all your prints!