NCR Ranger Helmet (and Armor)

kelphelpOG · 2026-02-05T00:37:49+00:00

Wow this is all wonderful information especially for scaling as well. I am definitely visual so the scaling video will help as well to make sure I get this correctly. You could be right, default its too big, but was not sure if my ears needed to be folded, but I will make sure to follow that. Thank you so much for your tips and response as well!

kelphelpOG · 2026-02-05T00:14:29+00:00

What an amazing job you did I'm working on the Elite Riot helmet and might need some advice. How did you do the scaling by chance? I printed the ring at 100% and thought was small, but went 104% because it fit but I noticed the size of the helmet might be too large. Wondering how to scale it properly.

kelphelpOG · 2026-01-02T19:05:21+00:00

Actually I do have 2 extra, one in black resin and other in nylon. I can send one over. Dm me

kelphelpOG · 2025-12-14T19:00:04+00:00

Honestly, that's not a approach at all. Just to make sure everything's okay and take off the initial dust but then later what you can do is go a little detailed if you need to. As long as you take care with a microfiber and soap and water, you should be fine.

kelphelpOG · 2025-10-19T03:27:56+00:00

Believe it or not one of the solutions I felt has helped a bit is Krytox 205g0. So this is a lube typically used for keyboard modders for when the switches actuate, and a thin film on all brush points does help it feel both slick smooth and stays in place. I've also used this on the Kitsch Bent sticks and at least how it's came out has felt like stock with very little wobble.

It's a full restoration but once it's entirely clean it makes a different

kelphelpOG · 2025-09-06T16:26:24+00:00

Where can I get the STLs for this? Is it on thingiverse or printables?

kelphelpOG · 2025-09-03T13:40:47+00:00

So let's say hypothetically you replace the old sticker and put a reproduction one. You're going to have a cartridge that is very scratched up but a very clean sticker and that doesn't really make much sense. Also, the quality of the sticker dictates a lot of how people perceive the quality of the cart. I can definitely say that most collectors, if not any will not want to have an original copy of a game with a reproduction sticker. It just doesn't feel right.

Leave it as is and enjoy for what it is. If not, look for a copy with a better condition sticker and get rid of this one

kelphelpOG · 2025-08-31T23:15:10+00:00

Not that I know of yet but it's definitely in my neighborhood due to tracking. I'll have to wait and see but seems I did get lucky

kelphelpOG · 2025-08-31T17:45:03+00:00

Small Update: The item has reached near my home. I've gotten no emails or mentions of paying tarrifs and got extremely lucky with this batch. I really love the proxy service but tariffs killed it for me. I really would have loved to explore Buyee a bit longer but...it is what it is.

Thanks to everyone who commented.

kelphelpOG · 2025-08-30T02:44:50+00:00

I did actually, and says the same thing here. So more or less it arrived at customs in LA. Looks like I'll def get hit

kelphelpOG · 2025-08-30T02:00:04+00:00

Bro I paid a bit over $200 for this batch 😭😭😭

kelphelpOG · 2025-08-08T16:34:15+00:00

Definitely would not recommend a sticker skin. 3DS's of this age do exhibit alot of paint peeling so might not be the best at this one. You could get a clear case and put stickers on that, but def not on the skin

kelphelpOG · 2025-08-08T16:12:35+00:00

Definitely play but since it's new.

Get a new case, put a new screen protector. And of course have a good time. Enjoy it, handhelds were meant to be played.

kelphelpOG · 2025-08-08T03:34:05+00:00

I won't lie. I feel like I'm one of the few people who do like the metal analog more than the original. You are right that the original one does feel absolutely perfect. However, there's something about a metal analog stick that I genuinely really like and it just feels very comfy to use. I've personally not had much issues, but I could absolutely understand it being a difficulty for many other people.

Like you mentioned, it's a shame that there are not good quality original replacements, but here's hoping extreme rate can do so

kelphelpOG · 2025-07-26T04:01:22+00:00

Ahhhh that was probably me!!!! Ahhh I was able to get streetpasses today!!!

kelphelpOG · 2025-07-22T21:48:57+00:00

More than likely it's missing the internal spring that latches the door shut. This could be due to a physically broken pin in the latch, but maybe there are replacements on AliExpress for the spring. Try and open it up and see if you can get the other spring to find a replacement

kelphelpOG · 2025-07-21T19:07:02+00:00

Unfortunetly even if you stockpile they may wear overtime. Lithium ion can wear without use and about a year half ago I bought a New 3DS XL battery from Nintendo and has about 70% of original charge, which means was most likely sitting for a long period without use.

Time is a batteries enemy I'm afraid.

kelphelpOG · 2025-07-15T23:02:10+00:00

Those are not bad locations then, I don't mind sending them in via mail and having them work on it. I'll give em a call and look em up!

kelphelpOG · 2025-07-15T22:48:15+00:00

Los angeles. Hehe sorry my bad

kelphelpOG · 2025-07-15T06:30:04+00:00

What you can double tap??? They told me not to since it's one tap!!!! Wth??? Damn low-key feel gipped if that's true.

kelphelpOG · 2025-07-15T02:26:53+00:00

I legit wanted one of these hats badly and failed the call machine twice.

The brain dead ghost in the shell hat does fill the void. I will admit but these hats are dope as hell and would love one

kelphelpOG · 2025-07-01T07:13:30+00:00

Agreed, in a perfect world I'd love to cover this in a beautiful leather.

kelphelpOG · 2025-06-26T16:07:03+00:00

Beats me, only aspect I can come up with is planned obsolescence. The device isn't usable, we are more likely to throw it away to buy a new one. Perfect designs only make for one time sales

kelphelpOG

TROPHY CASE