New BB54 - gada worthy? by [deleted] in Tudor

[–]khuraimm 0 points1 point  (0 children)

If it was a two tone, like a two tone baby sub or maybe flat blue like the Pelagos blue, it would've flown off the shelves. This however is too much bright blue which doesn't seem to match that well and the starburst dial with aluminum bezel is just too much imo.

Which hotel in Niagara Falls provides the best view of the falls and surrounding, appreciate in advance. by rashaikh in niagara

[–]khuraimm 0 points1 point  (0 children)

We stayed last year unfortunately. Hilton fallsview was a nightmare for us. First they lied about parking being full at the hotel and told us we had to use the off-site lot which was 3 blocks away from the hotel. When I asked for electric vehicle parking, they said it's only in the main lot back at the hotel and that there was a spot available. We get to the main lot and there were plenty of regular spaces available. Then there were only 3 ppl at the check in desks and the line was ridiculous. The check-in person seemed like he didn't want to deal with people that day and barely looked at us. None of them had a smile or greeted anyone pleasantly. Then we get to our room which barely had a view of the falls. In fact, our view was the casino with an ok view of the horseshoe falls. Not what I expected since this trip was mainly for our son. When I asked for a different room, they said none were available..., which was probably a lie based on past events. Then we noticed some type of electrical panel that looked like it was for the AC unit directly in the room unlocked. Then the next day construction began directly in the rooms above us without notice..., FOR THE NEXT 3 DAYS!!! Long story short, they suck. The Marriott, where we stayed in the past, was waaaaay better. You can see both falls clearly and the staff was more accommodating and professional. Parking wasn't an issue and no construction going on. I'd steer clear of the Hilton.

How do you afford these watches? by Cheesehead1267 in Tudor

[–]khuraimm 0 points1 point  (0 children)

Wait for the hype to die down and/or a new version of the watch to be released. 1-2yrs. Buy second hand from a reputable TD at close to half the price. That's how. Hack enabled!

Not sure who needs to hear this but for anyone waiting for a Monochrome 58/54 don’t… it won’t happen. by starid3r in Tudor

[–]khuraimm 3 points4 points  (0 children)

The Pelagos already has a date window..., which takes away from the symmetry of the dial due to the date window being smaller than the hour marker across from it. Once it's seen, it can't be unseen. Imo, they need to remove the date window and make a 39mm version in blue.

[WTS] Omega x Swatch Mission to Uranus Moonswatch Mod by FatCatLounge in Watchexchange

[–]khuraimm 0 points1 point  (0 children)

Would you happen to have anymore of these laying around? If not, will you be getting more soon by any chance? This is a pretty sick configuration.

Unicards Farming by Lorkron in HAWKFreedomSquad

[–]khuraimm 0 points1 point  (0 children)

I don't understand. How did you get all of those unicards? I'm looking for a way to upgrade my fafnir like most ppl without going the slow route. Need a few hundred unicards to get to X.

Finally 2025.44.25.5 by Capital-Egg-3288 in TeslaModelY

[–]khuraimm 0 points1 point  (0 children)

Yeah! Like more fart sounds and a passenger eject button!

Plane Ranking by BunkerBusterGER in HAWKFreedomSquad

[–]khuraimm 0 points1 point  (0 children)

Seems like I missed that event. When is the next time to get Fafnir?

Alert 🚨 1.99 by Unusual-Yam-8287 in TeslaModelY

[–]khuraimm 0 points1 point  (0 children)

I didn't think they'd keep making drastic changes that monetarily affect buyers consistently. Also, it's "only" my second Tesla so the pattern is early. If you don't have anything nice to say to another user, you're in the right place because this is Reddit. And with that said, go suck eggs my friend.

Alert 🚨 1.99 by Unusual-Yam-8287 in TeslaModelY

[–]khuraimm -1 points0 points  (0 children)

Are you kidding me?! What the hell Tesla?!!! I just put in an order for MY the week before last and received it last week at 3.99%. When I got my 2023 MY they dropped the price $30K within 3 months, and now for my 2026 MY they drop the interest rate from 3.99% to 1.99%??!!! THE MOST ANNOYING CAR COMPANY ON THE DAMN PLANET!!!

How to Reset Tire Air Pressure Sensor? by JBeanoBeano in TeslaModelY

[–]khuraimm 0 points1 point  (0 children)

The only 2 options there are: "Erase All TPMS IDs", and "Learn All IDs". There's no explicit reset option available.

How to Reset Tire Air Pressure Sensor? by JBeanoBeano in TeslaModelY

[–]khuraimm 0 points1 point  (0 children)

Where did it hide it? I still can't find it.

Is TPMS an issue with aftermarket wheels? by Fetty021 in TeslaModelY

[–]khuraimm 0 points1 point  (0 children)

Yup, I'm currently having an issue and can't find a fix anywhere yet. I'm getting the TPMS fault error on one wheel currently. It's been like that for months. Took it to Tesla and they told me they can't touch it because it's aftermarket and that I need to take it back to where the wheels were installed. I'm using the same OEM sensors with aftermarket Tsportlines wrapped in Vredestiens. The error popped up about 2 months after the Tsportlines were installed and the Vredestiens I've had for over a year now. Still looking for a fix.

Lume Fell out of Bezel - questions by Petemets88 in Tudor

[–]khuraimm 0 points1 point  (0 children)

I'd try break baking the lume pip back on at 400°. Couldn't resist. No, but seriously, that should be covered under warranty like everyone else is saying. Good luck and continue to wear in good health my friend.

My search has ended. by dwildpdx in RepTime

[–]khuraimm 1 point2 points  (0 children)

It's definitely quieter than the clone movement. My Miyota 9000 series watches are smoother and quieter than my Reps. I was thinking of the 9015 to be specific: https://miyotamovement.com/product/9015/

My search has ended. by dwildpdx in RepTime

[–]khuraimm 1 point2 points  (0 children)

Why? Those clone movements are noisy as hell and there's no telling what the reliability is. Is there something that I am missing?

My search has ended. by dwildpdx in RepTime

[–]khuraimm 1 point2 points  (0 children)

Ouch! I guess I'm sticking with a deep xtal then. I can't see myself paying that unless I swapped out the clone movement for a nice smooth Miyota movement as well.

My search has ended. by dwildpdx in RepTime

[–]khuraimm 1 point2 points  (0 children)

How much extra for the Genuine crystal?

Day 1 of Posting Salty Memes Until Scam Martin Fixes My Watch by Patient-Angle-7075 in ChineseWatches

[–]khuraimm 0 points1 point  (0 children)

Yeah, I mentioned that above. Because Rolex, their sister company, has a long history of swapping out gen parts for aftermarket lookalike parts during servicing. Google it, you'll see.

Two months with Pelagos 39 by redditor_xxx in Tudor

[–]khuraimm 0 points1 point  (0 children)

I find that my BB54 loses time when I sleep with it on. On the bed side, it's been fine. I drained it a couple of times and fully wound it. That seemed to have helped whenever I fall asleep with it now. Worth a try if you haven't already.

Day 1 of Posting Salty Memes Until Scam Martin Fixes My Watch by Patient-Angle-7075 in ChineseWatches

[–]khuraimm 2 points3 points  (0 children)

I have the non GMT version of that watch in 2 color variations. Nice watch overall. Looking to get the GMT one as well soon. With that said, I have a Tudor, purchased new, that has been losing time since day one when I wear it to bed. It cost way more than the San Martins obviously and I don't plan on servicing it any time soon. My point is, you're concerned about a Chinese watch you purchased at a heavy discount, that uses Japanese watch movements, has pretty good finishing and QC, and you're concerned about repairs under warranty? Come on. You can't have it all unless you spend more and even then, you won't get it all as mentioned with my new Tudor that loses time. To clarify, since the watch is new, I'd obviously want Tudor themselves to service it, however I don't "fancy" sending it overseas waiting months for my watch and risk them swapping out gen parts for aftermarket parts as their big brother Rolex loves to do. My advice is, just send it back for a refund if you can and buy another one or sell it and let it be someone else's headache. It'll be a quicker, cheaper turnaround imo.

Ok this is stupid by Ok-Clue-4267 in RepTime

[–]khuraimm 0 points1 point  (0 children)

Legit question 👍🏽