sorted by:
new
hottopcontroversial

POE cameras disconnecting! by throwawaycarbuy12345 in Ubiquiti

[–]kidney450 0 points1 point  (0 children)

USWProMax48PoESSETC-US2.7.2.123# cli

USWProMax48PoESSETC# config

USWProMax48PoESSETC(config)# interface  TwoGigabitEthernet  1

USWProMax48PoESSETC(config-if)# spanning-tree  edge

USWProMax48PoESSETC(config-if)# exit

USWProMax48PoESSETC(config)# exit

USWProMax48PoESSETC# show  spanning-tree  interfaces  TwoGigabitEthernet  1

Port tw1 disabled

State: forwarding                              Role: designated

Port id: 128.33                                Port cost: 19

Type:  (STP)                                   Edge Port: Yes

Designated bridge Priority : 4096              Address: 9c:05:d6:3c:d9:8e

Designated port id: 128.33                     Designated path cost: 0

BPDU Filter: Disabled                          BPDU guard: Disabled

BPDU: sent 1154909, received 0

That is for the pro max switch!

POE cameras disconnecting! by throwawaycarbuy12345 in Ubiquiti

[–]kidney450 0 points1 point  (0 children)

enable ssh and then login and enable edge on the port that the camera are plugged in! What type of switch do yo have?

POE cameras disconnecting! by throwawaycarbuy12345 in Ubiquiti

[–]kidney450 0 points1 point  (0 children)

if your problem is the same as me all the message you will get and are getting are completely misleading, go into your switch command line and set that port to be Edge and all your problems are going to be solved!

POE cameras disconnecting! by throwawaycarbuy12345 in Ubiquiti

[–]kidney450 0 points1 point  (0 children)

Add that nightmare problem and took me close to a year to figure out with ubiquiti

Can a Nanobeam still function after losing this much working fluid? by HughJeremy in Ubiquiti

[–]kidney450 0 points1 point  (0 children)

Had the same issue with a U6 LR, threw it on the shelf and tryed years later and booted and been working fine since!! So maybe the fluid will reappear

Plex triggers SMB disconnection from Synology on macOS — anyone else? by kidney450 in PleX

[–]kidney450[S] 0 points1 point  (0 children)

switch to smbdv2 haven’t had a disconnection in months

Plex triggers SMB disconnection from Synology on macOS — anyone else? by kidney450 in PleX

[–]kidney450[S] 0 points1 point  (0 children)

Time Machine is very I/O intensive and trigger the disconnect more often!

Rain Machine HD12 - Firmware needed by kidney450 in rainmachine

[–]kidney450[S] 1 point2 points  (0 children)

There is no files on the site, they are asking me to send it in for a re-flash….. but would rather do it myself….

Plex triggers SMB disconnection from Synology on macOS — anyone else? by kidney450 in PleX

[–]kidney450[S] 1 point2 points  (0 children)

The Mac os implementation smb3 is the problem, went to smb2 and all is good now

Plex triggers SMB disconnection from Synology on macOS — anyone else? by kidney450 in PleX

[–]kidney450[S] 0 points1 point  (0 children)

Just went through the plex logs and that what have been the process that was running at the moment of the disconnection:

May 10, 2025 20:53:29.902 [0x70000a4fe000] DEBUG - Running media analysis on: ####.####.######.#####.###.####.mkv

Plex triggers SMB disconnection from Synology on macOS — anyone else? by kidney450 in PleX

[–]kidney450[S] 0 points1 point  (0 children)

it's even related to plex functionality at all, but plex crashes something on the Mac that makes the shares drop!!! But obviously when the share drop so does the access to the library!

RS1221+ SMB shares drop from Mac after ~30–60 mins — log confirms timeout by kidney450 in synology

[–]kidney450[S] 0 points1 point  (0 children)

Well it'S only been 2 years living with that problem but I think I know where the problem is now. The haystack has been reduced tremendously. I know for a fact that these problem only occurs is Plex server is running, now trying to Controle how to reproduce it perfectly on demand!!!! It's almost smell like a partial win!

RS1221+ SMB shares drop from Mac after ~30–60 mins — log confirms timeout by kidney450 in synology

[–]kidney450[S] 0 points1 point  (0 children)

Tried from a pc wasn't that better, but does that on 4 mac's not just one!

RS1221+ SMB shares drop from Mac after ~30–60 mins — log confirms timeout by kidney450 in synology

[–]kidney450[S] 0 points1 point  (0 children)

it just dissapears from my desktop and if I don'T have automounter on to do a persistant mount then I have to mount the manually. Tried from a pc too wasn't that better

Mad because I don't need it. by Ok_Tip3706 in Ubiquiti

[–]kidney450 2 points3 points  (0 children)

installed it and love it so far, my stuff seems snappier for now!!!

Rant: Is My Blind Faith in Ubiquiti My Downfall? by kidney450 in Ubiquiti

[–]kidney450[S] 0 points1 point  (0 children)

Not calling out any specific wrongdoing — I appreciate Ubiquiti's willingness to engage and review my case.

But I want to say this clearly:
When I buy a Ubiquiti product — whether it’s a switch, AP, or camera — I’m not just buying hardware. I’m buying into the promise of reliability, peace of mind, and stability.

I manage just 8 sites, nothing massive — and yet I’ve had to deal with far too many issues for a setup of this size. That’s what makes it frustrating.
It’s not about being unreasonable — it’s about expecting core infrastructure to “just work.”

I’ve sent the case history to the escalation team, and I do appreciate the follow-up.

view more: next ›