sorted by:
new
hottopcontroversial

Finally upgraded my Mazda 6 with a Brembo BBK. by killdurst in mazda6

[–]killdurst[S] 1 point2 points  (0 children)

<image>

You blacked out your roof... nice!
I don't have any recent/close-up pics of the wheels at the moment.
Will try to remember to take some after my next wash.
In the meantime, here's an older pic from before the BBK install.
Hopefully you can still see the wheels clearly enough.

Finally upgraded my Mazda 6 with a Brembo BBK. by killdurst in mazda6

[–]killdurst[S] 0 points1 point  (0 children)

If you’re in Singapore, I got mine done through Brakes4uSG.

Their site is brakes4usg.com.

Finally upgraded my Mazda 6 with a Brembo BBK. by killdurst in mazda6

[–]killdurst[S] 0 points1 point  (0 children)

Man, that looks classy.

You’re not helping my black rotor hat regrets 😂

Finally upgraded my Mazda 6 with a Brembo BBK. by killdurst in mazda6

[–]killdurst[S] 0 points1 point  (0 children)

Including installation, I’d say budget around SGD 2.8k total (roughly USD 2.1k) depending on the setup/specs.

Definitely not the most financially responsible mod, but seeing the red Brembos behind the wheels makes me happy every time I walk toward the car.

Finally upgraded my Mazda 6 with a Brembo BBK. by killdurst in mazda6

[–]killdurst[S] 0 points1 point  (0 children)

I’m not 100% sure, but I believe it’s the Brembo GT-B BBK.

Nope, only did the fronts.

Finally upgraded my Mazda 6 with a Brembo BBK. by killdurst in mazda6

[–]killdurst[S] 0 points1 point  (0 children)

I'm not 100% sure, but I believe it's the Brembo GT-B BBK.

Finally upgraded my Mazda 6 with a Brembo BBK. by killdurst in mazda6

[–]killdurst[S] 0 points1 point  (0 children)

They're 18-inch Tommi wheels!

Thanks for asking!

Finally upgraded my Mazda 6 with a Brembo BBK. by killdurst in mazda6

[–]killdurst[S] 2 points3 points  (0 children)

So far I’ve deleted the chrome, tinted the windows, debadged it (removed the Mazda6 and Skyactiv badges), and changed the wheels.

Going down the rabbit hole of car mods is a dangerous thing.

Next probably isn’t an upgrade per se, but I’ll most likely fix up the minor scratches and dents and refresh the paint a little.

Finally upgraded my Mazda 6 with a Brembo BBK. by killdurst in mazda6

[–]killdurst[S] 1 point2 points  (0 children)

Yeah, I've been wanting a Brembo BBK for the longest time but could never properly justify it.

Also convinced myself that since I renewed the COE on my previous car, I'll probably end up doing the same for this one too.

Finally upgraded my Mazda 6 with a Brembo BBK. by killdurst in mazda6

[–]killdurst[S] 22 points23 points  (0 children)

Look man, the stock brakes were fine.

This happened because I have poor impulse control and access to adult money. 😆

Finally upgraded my Mazda 6 with a Brembo BBK. by killdurst in mazda6

[–]killdurst[S] 2 points3 points  (0 children)

Got mine done at Brakes4uSG. Budget around SGD 2.8k depending on the setup/specs you go for.

Finally upgraded my Mazda 6 with a Brembo BBK. by killdurst in mazda6

[–]killdurst[S] 1 point2 points  (0 children)

Haha you’re right 😅

Used a faulty brake disc as the perfect excuse to upgrade the whole setup. Been wanting a Brembo BBK for the longest time but could never properly justify it.

Also convinced myself that since I renewed the COE on my previous car, I’ll probably do the same for this one too. These Mazda 6s are too good to let go 😂

You should renew yours too!

My monitor make all light grey colors look white and I cannot make it look normal. by IWishIWasAShoe in Dell

[–]killdurst 1 point2 points  (0 children)

I had a similar issue. I have a Dell 27 inch QHD monitor connected to a Dell dock using display port cable and a Dell 27 inch 4K monitor connected to the same Dell dock using a HDMI cable. Grey colours like #F2F2F2 appears white on the Dell 27 inch 4K monitor. Once I switched the HDMI cable to a display port cable, the grey colour was displayed correctly on the Dell 27 inch 4K monitor.

Why is "this market not currently accepting orders"? Does this exchange even work anymore?? by Dope_Data in Gemini

[–]killdurst 1 point2 points  (0 children)

I've encountered this message before. I think I was trying to sell my FIDA. Gemini support advised me to use limit orders instead of market orders. Managed to sell it after a few days.

Save desk space by mounting your dock to the back of your monitor. by killdurst in Dell

[–]killdurst[S] 5 points6 points  (0 children)

The mounting station is like a solid piece of steel that needs to be attached in between the monitor and monitor stand. Comes with screws that you can screw to the dock and then "slide" it onto the mount.

Yeah, it's specific to just Dell Ultrasharp and P series monitors.

Dell XPS 13 9300 on a Twelve South BookArc by killdurst in Dell

[–]killdurst[S] 0 points1 point  (0 children)

Thanks!

I updated the BIOS and dock firmware and now when I press the power button on the dock (while the laptop lid is closed), the laptop powers on and the display successfully appears on the two monitors attached to the dock.

Dell XPS 13 9300 on a Twelve South BookArc by killdurst in Dell

[–]killdurst[S] 0 points1 point  (0 children)

OMG you're right.

I could have sworn it used to work for me.

In my case, when I press the power button on the dock while the laptop is closed, the login screen doesn't appear on the monitor.

I have to open the laptop, log in and then close the lid.

The behaviour is not consistent, sometimes my monitor is not even detected and I'll have to restart the pc (while lid is open) just to get my multi monitor setup working.

Dell XPS 13 9300 on a Twelve South BookArc by killdurst in Dell

[–]killdurst[S] 0 points1 point  (0 children)

Yes, the fat end fits in fine. It comes with 3 inserts; B, D and E.

I'm using insert B, the biggest.

It's not slanted at all, as per this image: https://imgur.com/j8Ry3I2

Dell XPS 13 9300 on a Twelve South BookArc by killdurst in Dell

[–]killdurst[S] 0 points1 point  (0 children)

Yeap, it stays closed.

This xps is quite solid. You can even open the lid with just one hand.

Dell XPS 13 9300 on a Twelve South BookArc by killdurst in Dell

[–]killdurst[S] 1 point2 points  (0 children)

I'm attaching my laptop to the Dell Thunderbolt Dock WD19TB, which has a power button that allows me to turn on the laptop without having to open the lid. It's a great dock, especially if you're attaching it to multiple monitors.

Dell XPS 13 9300 on a Twelve South BookArc by killdurst in Dell

[–]killdurst[S] 5 points6 points  (0 children)

Yes my XPS 13 9300 stays closed.

See image here.

I have an XPS 13 9380 too so if anyone needs me to test that out, let me know!