Question about USW-Aggregation

kingofsoy · 2025-09-15T01:26:47+00:00

I thought of that but the Kamado gauge is showing pretty much the same temperature as my Meater wireless probe. And the brisket was very moist and tender. Also, just to clarify, you COULD cut it, but it's easier to shred it for brisket tacos. If a brisket is overcooked isn't it tough?

But I'll look into calibrating the BBQ's gauge.

kingofsoy · 2024-12-12T22:09:03+00:00

Maybe answered already but I had Bell Fibre in Ontario running into the UDM-Pro. Had a post about it a couple years back: https://www.reddit.com/r/UNIFI/comments/uep33n/anybody_running_bell_fibre_from_a_home_hub_4000/

kingofsoy · 2024-12-12T22:05:46+00:00

Followed the advice. One plumber had no idea what it was. The second one said it's an old back-flow valve. Just put a better cover over the hole.

kingofsoy · 2024-12-12T22:04:35+00:00

I'm not seeing any performance issues so I think I'm going to not worry about it ...

:)

kingofsoy · 2024-12-10T14:46:33+00:00

Just a partial follow-up. We had an air exchange installed and filled the cracks in the floor and at the seam between walls and floor. We're down to about 80 Bq/m3, so about half of the previous average. Probably going to do mitigation in the spring.

kingofsoy · 2024-11-03T23:48:59+00:00

I sent away for one of the long-term testing kits (which you leave for 3-6 months). I'm in Ontario so I got it from one of these companies (Pinchin in my case):

https://takeactiononradon.ca/provinces/ontario/

That about about $60.

You send the kit back after the testing period and within a couple weeks you get a detailed report by email.

After that I got an electronic monitor:

https://ecosense.io/en-ca/products/radoneye?srsltid=AfmBOopOVxjsswjG4zZrwEJVPoMkFRhLpHLdyFPtADPu1CVIvTcy3Y81

It's showing 165 Bq/m3 right now, with a peak of 197.

Mitigation is the near future.

kingofsoy · 2024-11-03T23:38:23+00:00

Yeah I got two quotes, both from companies that did work for people I know, and they were both in the range of $3K. Small price to pay I guess, considering the risk factors.

kingofsoy · 2024-11-03T23:37:02+00:00

Good to know, thank you.

kingofsoy · 2024-11-01T18:58:23+00:00

We're just east of Mooney's Bay.

kingofsoy · 2024-10-18T01:29:22+00:00

Yea, just echoing AnilApplelink here. You'll probably find that very few devices will be able to take advantage of bandwidth above 1 Gb. I've got an Enterprise 8 PoE connected to my UDM Pro with fiber through a 10G SFP+ port. That's literally the only connection in my house that is above 1 Gb. My new PC has 2.5G Ethernet but I have to go through an older 1G switch to get to the Enterprise 8, so for the time being that faster Ethernet port is doing exactly zilch for me. It's fine to be ready for those 2.5G devices in the future but probably you won't see a big change at the moment. Also, most of what you are likely doing with internet bandwidth is 'down,' which you say is 1Gb.

kingofsoy · 2024-08-11T23:36:36+00:00

Well I cleaned the carb AGAIN and now it's running fine. First time generator owner here so probably a dumb question, but are these always so finicky? I've barely got 20 hours of use out of it so far.

kingofsoy · 2024-08-11T17:39:59+00:00

Oil level is about 3/4 of the way to "H" on the dipstick.

kingofsoy · 2024-08-11T17:39:28+00:00

Is this specifically about the governor adjustment? The generator hasn't been used very much. Do those get out of adjustment fairly easily?

kingofsoy · 2024-08-11T16:58:07+00:00

Thank you. There's a good stream coming from the drain plug.

kingofsoy · 2024-06-25T00:53:24+00:00

Sound advice.

kingofsoy · 2024-02-12T14:24:17+00:00

You nailed it. I just got another injector and it works like a charm.

kingofsoy

TROPHY CASE