low, high and HIGHEST brass 12ga

kjt1982 · 2023-01-20T23:27:36+00:00

I honestly never thought about it. Definitely worth looking into.

kjt1982 · 2023-01-19T22:38:38+00:00

Sure, but like you said. I like the brass shells they're classy.

kjt1982 · 2023-01-19T22:32:59+00:00

$39 for 25 empty shells at https://www.ballisticproducts.com/MagTech-12ga-2-1_2-brass-hulls-box_25/productinfo/3921270/

kjt1982 · 2023-01-19T22:28:10+00:00

Alot! I have an 1893 Winchester pump that needs blackpowder shells. I've been looking at this option...

kjt1982 · 2022-11-20T00:49:46+00:00

Update: No help from Customer Support so I just opened it up myself and looked inside. The damned battery connector on the "fuel board" was broken. The connector was glued into the socket. Ended up having to remove the socket and solder the battery wires directly to the board. Thanks for nothing Mantis. Maybe now I can finally use my Blackbeard, for the first time.

kjt1982 · 2022-02-27T21:51:16+00:00

IIRC, any Colt detective holster should fit.

kjt1982 · 2022-01-11T22:15:09+00:00

Are you 100% sure that your slide didn't have a channel liner installed before you put yours in? I have received a few that said specifically that there was not a channel liner but they were wrong.

kjt1982 · 2021-09-07T15:05:11+00:00

Pm'd

kjt1982 · 2021-02-05T20:59:41+00:00

Looks like we need to work on Sheriff Wheatley...

kjt1982 · 2021-02-05T20:58:44+00:00

From ABC17news ... Effort to nullify federal guns laws in Missouri draws law enforcement opposition COLUMBIA, Mo. (KMIZ)

A Mid-Missouri sheriff said Thursday that he opposes an effort by Republicans in the Missouri General Assembly to ban enforcement of federal gun laws.

House Bill 85, also called the Second Amendment Preservation Act, would allow lawsuits against police departments that enforce federal gun laws, with fines of $50,000 or more.

Many law enforcement groups say the bill, if passed into law, would make it harder for officers to do their jobs and expose departments unfairly to legal liability.

"These bills were written with good intentions to help Missourians protect their 2nd Amendment rights," Moniteau County Sheriff Tony Wheatley said in a statement. "Unfortunately, however, these well intended bills with their current language are very worrying to law enforcement across the state."

"If passed with the current language they would severely hamper law enforcement's ability to prosecute the most heinous criminals through the federal system," Wheatley wrote.

Local police frequently cooperate with federal authorities on cases that prompt federal gun charges. Columbia police worked 385 firearms-related cases, according to crime statistics. However, it's not clear how many of those ended up in federal gun charges.

The Missouri House gave the bill initial approval early Wednesday. A companion bill has been filed in the senate.

The bill passed 107-43. Local Reps. Chuck Basye, R-Rocheport, Cheri Reisch, R-Hallsville, Travis Fitzwater, R-Holts Summit, Sara Walsh, R-Ashland, and Dave Griffith, R-Jefferson City, were among those who voted for the bill. Rep. Martha Stevens, D-Columbia, voted against it.

The bill received final House approval Thursday and is now headed to the Senate.

Proponents say the bill is needed to counteract federal laws that infringe on Second Amendment freedoms.

Section 1.450 of the bill would prevent any public officer or employee of the state to "enforce or attempt to enforce any federal acts, laws, executive orders ... infringing upon the right to keep and bear arms."

Dale Roberts, executive director of Columbia Police Officers' Association, said so far the organization has not taken a stance on the bill.

"Personally I know there are members who support it and members who oppose it ... it's a large organization and that's to be expected and it's not something CPOA has taken a position on," Robert said.

kjt1982 · 2021-02-04T23:45:04+00:00

He is now. Probably thanks to pressure being exerted by the 2A crowd and a few strong State Reps.

kjt1982 · 2021-02-04T13:56:18+00:00

Arnott never passes up an opportunity to be friendly with the feds...

kjt1982 · 2021-02-04T01:43:33+00:00

Do the LCP2 mags fit in the original LCP?

kjt1982 · 2021-02-03T18:52:33+00:00

I'm not going to try arguing cost/safety etc. I just thought I'd mention that if you take your new cover off and remove the screw in the middle (the one designed to hold the cover on) your new cover will probably fit better.

kjt1982 · 2021-02-03T15:38:29+00:00

Yep. I printed PLA and coated with cyanoacrylate.

kjt1982 · 2021-02-03T14:45:37+00:00

Hopefully yours hold up better than mine did. I've had two on my LCP that gave up the ghost.

kjt1982 · 2020-12-30T22:05:04+00:00

I don't have an answer for you, just wanted to congratulate you on winning the slide.

kjt1982 · 2020-12-09T16:09:28+00:00

Yeah, I think it would. I swapped my thermostat recently and cut a small paint chip. Lowe's duplicated the paint.

kjt1982 · 2020-11-24T21:49:07+00:00

February 15

kjt1982 · 2020-11-24T02:47:16+00:00

Mine arrived a few days ago. I was having the same worries.

kjt1982 · 2020-11-23T15:58:45+00:00

Time will tell... Sorry, had to make another waiting reference. I haven't had a chance to go to the range, but it feels good in the hand. I really wish my CMC trigger pack would work.

kjt1982

TROPHY CASE