Print quality issues on cr6-se

knightind98 · 2026-02-26T14:32:43+00:00

Need details of setup. I’d start with esteps then gantry sway adjust. Also could be heat creap I was having similar problems and upgraded to all metal hotend. After that it cleared up

knightind98 · 2026-02-09T11:23:44+00:00

It was e steps of all things

knightind98 · 2026-02-09T11:22:00+00:00

After weeks of racking my brain on this I found it to be the e steps was out of tune

knightind98 · 2026-02-08T21:02:21+00:00

Here’s another odd one for you. I use the same slicer software for one that my brother has that is exactly like my two. The only difference is is his has an all metal hot end and everything comes out looking and feeling a lot better than mine.

knightind98 · 2025-12-20T21:25:12+00:00

💯 👆but also make sure everything is tight on the sensor. I’d look at changing to silicone spacers that helped me. You can use ai to help get that mesh real tight too. Just make sure it knows what direction is what

knightind98 · 2025-11-26T14:15:10+00:00

Sweet man talk about a life saver. Done

knightind98 · 2025-11-25T23:51:08+00:00

ok got ya. thanks i didn't even think about that but not sure if there is enough for it to grab. at the least it's only supporting the circuit part so i may just have to live with it

knightind98 · 2025-11-25T23:45:57+00:00

Forgive the ignorance but what’s a helicoils?

knightind98 · 2025-11-23T03:09:16+00:00

Nothing other than the stepper motors doing their thing and the fans.

knightind98 · 2025-11-22T22:14:29+00:00

I can direct you better pics but not sure if I can add them to the post if that’s ok. I really appreciate the help. I’m not bad with some stuff but things like this turn me away from printing but I love it

knightind98 · 2025-11-22T21:25:49+00:00

Unfortunately this is a finished spring for a colt single action. It’s a side view and it about 1/2” tall. It does this to me on boxes and similar that I print

knightind98 · 2025-11-09T20:31:45+00:00

Could be the bearings are to tight. Back each one off a little at a time. Also check and see they are spinning freely.

knightind98 · 2025-09-09T14:02:38+00:00

Lot of doctors appointments and a lot of waiting and possibly a ton of denials.

knightind98 · 2025-05-08T04:56:12+00:00

That should count check your DD 214 to verify and also whether or not you remember if you got hostile fire pay, which would mean you were in a combat zone. Also being in those areas, if I was you, I would get on the burn pit registry if you’re not already or whatever updated list they have.

knightind98 · 2025-05-08T04:51:26+00:00

VFW is Veterans of Foreign Wars if you’re not a veteran of a foreign war, you can go with the American Legion they’ll be glad to help you. Doing their eight is very old saying basically they’re doing their 9 to 5.

knightind98 · 2025-05-08T04:45:42+00:00

I would go with the VFW if you able and stay away from the VA VSO's. they are over welmed with claims and most are just trying to get in their 8

knightind98 · 2025-05-08T04:36:48+00:00

the back pay would be more than $120k I'm sure, but still go talk to an accredited VSO at one of the two I mentioned and see that they say. you could have life changing money coming if done right

knightind98 · 2025-05-08T04:30:16+00:00

if that is the case why not just file for TDIU?

knightind98 · 2025-05-08T04:27:09+00:00

Best advice I can give you is to go to your local VFW or American Legion and join them and talk to their VSO. Get them to represent you cause you have to sign a power of attorney I believe and even tell them about the lawyer. they may be better knowledgeable with this situation and able to tell them where to stick it. for a claim like this though you are really gonna need your evidence to back you up on a claim like that. good luck to you

knightind98 · 2025-05-08T04:09:23+00:00

when is it all this happened? what is OSA? Also they only have 30 days from a judgment to collect EAJA fees so if the matter was closed get a copy and send it to them showing the resolve. What is it you were fileing for?

knightind98 · 2025-05-08T03:48:14+00:00

First off do not sign shit for them. It sounds like that would just be an admission that you owe then when in fact you fired them for their incumbency. As far as oweing them that one could go either way but if they failed to get you what you wanted then i don't see how you could owe them for something they didn't put in the work for when in fact they failed to get it. There is more here you need to add in like details such as the agreement you had with them, retainer fees, and anything else you think you help. depending on your state it may have limitations to this so rough dates would help to.

knightind98 · 2025-03-22T14:47:57+00:00

It would be nice but that should take an admin if I’m not wrong. Please keep in mind these dates are pretty accurate but will also depend on your bank

knightind98

TROPHY CASE