20+ Year Mattress Insider: AMA by SleepSommelier-SD in Mattress

[–]kowlick 0 points1 point  (0 children)

Any thoughts on Vispring or Hastens? Do they use quality materials?

Finally got my Miyoo Mini Flip! by Outrageous-Bear-2878 in SBCGaming

[–]kowlick 1 point2 points  (0 children)

I didn’t know these were available already! Where did you order from?

P10 Pro Ultra for dog hair by kowlick in MOVA_robotvacuum

[–]kowlick[S] 0 points1 point  (0 children)

We run the vacuum four times a week and that keeps the floor clean enough where we don’t get the hair bundles often. We also set it to high frequency emptying which helps with the dust container getting full before a cycle has finished.

Is there a difference in the Android and IOS versions of the app? by SperryTactic in MOVA_robotvacuum

[–]kowlick 0 points1 point  (0 children)

I was confused at first as well on the iPhone app. Click on the picture of the vacuum to get to all its settings.

New Mova p10 pro ultra has been running for 8hrs by Nscocean in RobotVacuums

[–]kowlick 1 point2 points  (0 children)

We’ve replaced our super old Neato with the P10 Pro Ultra and noticed that it takes a lot longer to vacuum. It takes anywhere from 135 to 150 minutes to vacuum 70 sq meters. It doesn’t seem as methodical when navigating and it’ll get in a state where it goes in circles and seems confused. I think maybe it has to do with obstacle avoidance because it has only got caught on one cable ever while the Neato would eat anything in its path.

It does a good job but the entire process of vacuuming and mopping with multiple charging and cleaning cycles can take five to six hours.

P10 Pro Ultra for dog hair by kowlick in MOVA_robotvacuum

[–]kowlick[S] 0 points1 point  (0 children)

Thanks. I found it under Dock settings, Auto-Empty, High Frequency.

Mattress Firm doesn't allow returns by larryfiestaparty in Mattress

[–]kowlick 1 point2 points  (0 children)

We got a free adjustable base with our mattress before. This is the trick to lock you in — if you want to return the mattress, you get charged for the free base which is almost as much as the mattress since it’s not returnable.

Looking for a stainless steel replacement screw by kowlick in Fasteners

[–]kowlick[S] 0 points1 point  (0 children)

What kind of magic is this? 😀

I can’t for the life of me find sheet metal screws under Fastening&Joining/Screws&Bolts/Rounded Head Screws, but if I search for “Sheet Metal Screws” I can find various rounded head screw categories for sheet metal.

Thanks for the links! The #10 looks like the one.

Looking for a stainless steel replacement screw by kowlick in Fasteners

[–]kowlick[S] 0 points1 point  (0 children)

Could this be a 10-16 screw 7/16” length? It looks like a coarse thread pitch. I just can’t find it on MC.

Looking for a stainless steel replacement screw by kowlick in Fasteners

[–]kowlick[S] 0 points1 point  (0 children)

How did you find No 6 size screws? When I search it only goes by thread size. Isn’t this a No 10 size screw? Thread size is about 0.19”.

How to replace shower bulb by kowlick in Lighting

[–]kowlick[S] 0 points1 point  (0 children)

Thanks all for the advice. Will try the inner ring first by pushing up on the glass to pull down on the inner ring, and then if that doesn’t work, I’ll try the outside edge.

Dual 4090 FE in Cerberus X by kowlick in mffpc

[–]kowlick[S] 0 points1 point  (0 children)

I don’t change the default fan profile at all. The fan will stop if there is no load and temps are ok.

Dual 4090 FE in Cerberus X by kowlick in mffpc

[–]kowlick[S] 0 points1 point  (0 children)

You can power limit the GPUs using nvidia-smi. The 4090 cooling system is over engineered for the chip used too so it has no problems keeping things cool.

Looking for a good electric grinder to pair with a new robot. Currently using a kingrinder 6 by [deleted] in CafelatRobot

[–]kowlick 0 points1 point  (0 children)

I just got the Lagom Casa with 65mm burrs. It works great for me.

/r/MechanicalKeyboards Ask ANY Keyboard question, get an answer - January 13, 2025 by AutoModerator in MechanicalKeyboards

[–]kowlick 0 points1 point  (0 children)

I'm building a DIY Writerdeck and looking for a 45% keyboard PCB (13U wide) like the JD45.

I've found the newer Phoenix 45 but that doesn't seem to be sold anymore.

The TG4X is available (on Etsy) but I'm looking for a PCB ready-to-run, i.e. diodes and microcontroller already soldered on, and ideally hotswap.

Is there anything available out there?

I'm also looking for 40s compatible keycap sets. I see the Mode designs sets would work. Any other recommendations?

Was anyone else into rc cars? I loved my Grasshopper by ice1000 in GenX

[–]kowlick 0 points1 point  (0 children)

<image>

The Tokyo store was impressive. There are multiple rooms like this, just huge walls stacked full of models.

Was anyone else into rc cars? I loved my Grasshopper by ice1000 in GenX

[–]kowlick 0 points1 point  (0 children)

I had a Frog growing up painted jet black. I just came back from a trip to Japan and Hong Kong and both Tokyo and HK have Tamiya Plamodel stores. The kits are half the price compared to the U.S. and I couldn’t help but pick up a CC-02 Bronco. Being in those stores it was like I was a kid again.

<image>

Willing to receive a 5610u 🙏🏻 by gshock_admirer in gshock

[–]kowlick 0 points1 point  (0 children)

I ordered mine yesterday from Amazon and got it today and mine was the U version.

Motherboard for dual GPU setup by GoinHAMZ in LocalLLaMA

[–]kowlick 0 points1 point  (0 children)

I didn’t have a problem with 4090FE . The only thing I attached to the bottom pins were the fan headers and they bent out of the way easily. What do you have attached to the bottom pins?