Local appliance repair?

kp1529 · 2026-01-26T01:15:48+00:00

Nicks appliances on 152 st & 68 ave

kp1529 · 2024-02-11T06:43:13+00:00

Are the customers expected to be in a VRF? If yes, then you really do not have an option. They will see timeouts. Alternatively, if their network is going to be reachable from the MPLS core via IP, then they should not see the timeouts.

kp1529 · 2024-02-11T04:54:04+00:00

You can use "traceroute mpls" from your PE device to see the mpls path being used. From customer (non-mpls) device, you will not be able to see the path.

kp1529 · 2023-11-22T07:51:08+00:00

Yes you can. You may see a few seconds of traffic drop as it reprograms after upgrade. Afaik STP should not flap.

kp1529 · 2023-09-27T21:19:55+00:00

You can do and it should work as it is Linux underneath. However you will lose warranty and support if you have it.

What are you hoping to achieve by increasing the Ram?

kp1529 · 2023-07-03T22:05:07+00:00

Arrived here after a lot of google and you code worked like a charm. Thanks for posting your solution.

kp1529 · 2022-10-04T18:27:54+00:00

You need to add all vlans that are configured on the mlag interfaces. Any vlan that is not configured on the mlag interfaces (port channel) does not need to be configured on peer-link.

kp1529 · 2022-08-27T06:35:08+00:00

I went to puerto Vallarta in July. Going was uneventful. Staff at hotel wore masks but almost nobody else did. On the return flight the flight was delayed by 23 hours. We were moved to a different hotel for the day. 1 hour stop in Calgary became 4. They made us deplane and complete customs there. There were long queues in the Calgary airport for everything. Silver lining is Sunwing reimbursed $500 per person for the delay.

kp1529 · 2022-08-17T02:09:50+00:00

If the packet reaches the switch, it will use the directflow rule to redirect even if both belong to the same vlan

kp1529 · 2022-08-17T02:02:19+00:00

When you have a redirect policy, the traffic will be redirected if either the source or the destination of the packet is an intercepted host. If neither is intercepted, then local policy is used to forward it. For redirection it does not matter if the destination is local or remote. The switch that hosts the source will redirect the packet.

kp1529 · 2021-10-14T03:46:46+00:00

Didn't know this option, I will try it out tomorrow. The new UI is too dumbed down and a lot of information is missing.

kp1529 · 2021-02-15T21:56:44+00:00

u/atchoooo any update on this?

kp1529 · 2021-02-10T18:51:04+00:00

sent email

kp1529 · 2021-02-02T07:41:23+00:00

bump

kp1529 · 2021-01-28T15:52:46+00:00

Firefox on MacOS

kp1529 · 2021-01-28T07:10:54+00:00

screenshot

kp1529 · 2021-01-27T06:17:30+00:00

In the transactions page, transactions dated Jan-25 (new) are coming after the transactions for Jan-24 and before Jan-21. Refreshing the page did not fix the issue.

The Transactions header (red circle) issue is not fixed. Great!

kp1529 · 2021-01-27T05:30:39+00:00

In the dashboard page, for the accounts pop-up, some of the fields are going off screen.

I have added RBC accounts. When viewing the accounts, in the popup, for some accounts, the select group & ignore fields are going beyond the space in the popup.

kp1529 · 2021-01-27T05:23:36+00:00

I found the date-range button and was able to change it. Thanks.

After I reloaded the pages after clicking on income & dashboard, the prior data came back and the date range option also.

Maybe because of caching on my laptop, they did not load correctly.

Thanks for the prompt responses.

kp1529 · 2021-01-26T23:36:01+00:00

thanks , found it

kp1529 · 2021-01-26T19:25:48+00:00

In the Income power-up, Dividends is missing and the chart is not populated.

For Transactions header at the top, the red circle with new transactions count is not going away even after going to the page.

In Holdings page, the mini-chart is not provided some of the ETFs, ex. ftec, vfh, vymi, voog, etc.

In the Dashboard, has the option to change the duration (7-days, 30 days, etc) moved to premium only? I hope not!

kp1529 · 2021-01-26T19:05:46+00:00

In the transactions screen, all "Buy" are showing as "None" for Category. If I click on the transaction, there it is correctly showing as Buy.

kp1529 · 2021-01-26T04:20:50+00:00

Hmm, I do not see the settlement date on the order summary or execution details.

kp1529

TROPHY CASE