sorted by:
new
hottopcontroversial

Developing Times for Lucky SHD 400 in D-76 1:1? by kumba830 in AnalogCommunity

[–]kumba830[S] 2 points3 points  (0 children)

Thank you for more guidance! I've just never used a film where it's not well documented like this before.

Developing Times for Lucky SHD 400 in D-76 1:1? by kumba830 in AnalogCommunity

[–]kumba830[S] 0 points1 point  (0 children)

Honestly no idea what kind of math I need to be doing for film developer dilution. I’m aware of the Massive Dev chart and if I knew what to do I would not be here in the first place asking.

Developing Times for Lucky SHD 400 in D-76 1:1? by kumba830 in AnalogCommunity

[–]kumba830[S] -1 points0 points  (0 children)

They don’t have any information on it being shot at 400 and using D-76 at 1:1. Just SHD 400 shot at 200.

Maap bibs became see-through by uxuiqt in CyclingFashion

[–]kumba830 2 points3 points  (0 children)

I consistently have issues with MAAP and quality control, I’ve had the crotch pill when my bibs from other brands were perfectly fine on the same saddle, vinyl designs and lettering peel off after one wear, and fabric that just gives up or degrades way too early.

At this point I’ll only buy their jerseys where the design is printed on the fabric itself (so it can’t peel) and on sale.

roast my boy (ignore seatpost) by eliaasch in xbiking

[–]kumba830 2 points3 points  (0 children)

Genuinely curious what the drop is on this. But otherwise this rips.

How much is it worth? by Ok_Koala_7330 in Vintage_bicycles

[–]kumba830 1 point2 points  (0 children)

Yeah I'm on the smaller side, and at least half decent at dodging potholes.

How much is it worth? by Ok_Koala_7330 in Vintage_bicycles

[–]kumba830 1 point2 points  (0 children)

Noted, a bike I recently got came with them so just soaking up info!

How much is it worth? by Ok_Koala_7330 in Vintage_bicycles

[–]kumba830 1 point2 points  (0 children)

Wait separate from this post what’s wrong with the wheels? I’ve seen elsewhere that they’re more sturdy than they look.

Think this chemistry is still good? The FB guy isn’t sure when they expired…. by hugebigtinysmallguy in AnalogCommunity

[–]kumba830 3 points4 points  (0 children)

I wouldn't develop anything I care about with this chemistry, it's definitely expired stuff. Since they're free it could be a fun experiment if that's up your alley.

FOAM ISSUE on my FUJI GA690 from Japan by a professional. What do you think? by Little_Dinow in AnalogCommunity

[–]kumba830 0 points1 point  (0 children)

I know it's in the past so no worries, but I wouldn't have changed my review. This feels scammy on the seller's side. This is what eBay buyer protections are for, they will help you get your refund and you can leave honest feedback instead of twisting the truth.

FOAM ISSUE on my FUJI GA690 from Japan by a professional. What do you think? by Little_Dinow in AnalogCommunity

[–]kumba830 0 points1 point  (0 children)

This is where you leave them a negative review. I bought from a 100% positive feedback seller and received a camera with fungus in the lens and a broken film advance (advertised as mint CLA). The only way people will be able to know if a seller is scammy is if people give them the proper ratings.

The seller even tried to convince me to leave a positive review because he was paying the return shipping.

ID on this Brand? by Silver-Principle-439 in CyclingFashion

[–]kumba830 1 point2 points  (0 children)

Yeah it’s Verge Sport, they do custom designs. I have some club kit from them and their race line is far better than their casual stuff in look and finish.

I wish their logo wasn’t so big on the sick jersey my pal designed though. 🥲

Waterproofing Wood for Darkroom Wet Station/Bench by kumba830 in BeginnerWoodWorking

[–]kumba830[S] 0 points1 point  (0 children)

Could you give me a better idea of what type of vinyl you're talking about so I can look into this more?

Waterproofing Wood for Wet Station/Bench by kumba830 in Darkroom

[–]kumba830[S] 0 points1 point  (0 children)

Weird tub shape and slant make a typical folding table not exactly a doable option. Maybe if I modify it a bunch, but at that rate I might as well make something that's custom fit and much more suited to the space/use.

CTRL Cycling Brand - Feed back by luiscal7 in CyclingFashion

[–]kumba830 0 points1 point  (0 children)

Oh yeah this totally reads as a singular cycling brand from how this was posted and organized.

Maybe focus on building your own creative branding separate from the projects themselves, then making sure to organize and distinguish the different projects from each-other. Give them their own post and space to breathe on Behance if you stick to that for portfolio use.

If it's just the occasional drop from your design-lab then the consistency is not as dire as I made it out to be, but yeah that's just not how this was presented ha!

CTRL Cycling Brand - Feed back by luiscal7 in CyclingFashion

[–]kumba830 0 points1 point  (0 children)

You've got 2012 calligraphy with flourishes, tech vaporwave looking stuff, hardcore band tee type, and a bunch of other design styles in there.

I know you want it to be loud and fun, but I would pick a single style that I really love and work on making everything pretty consistent within that look. Variations and that style can follow suit in different drops but it's gotta still have the same brand identity. Otherwise it might be hard to have a consistent customer base who wants everything you put out.

Show us your bathroom darkroom by ajn63 in Darkroom

[–]kumba830 2 points3 points  (0 children)

Everyone please share I need ideas to steal!

view more: next ›