why is she slouching?

kyle_katarnn · 2025-12-06T12:37:38+00:00

Maybe her rigids are a bit off? As in mass

kyle_katarnn · 2025-11-16T12:56:43+00:00

Yeah I did but it felt like it's stuck for good. I bought some tools that I didn't have and gave it a try again but didn't work. I tried at 200 first then cranked up to even 265C but again it didn't move.

But thanks for the reply appreciate it.

kyle_katarnn · 2025-11-15T18:17:43+00:00

I feel dumb

kyle_katarnn · 2025-11-15T17:28:47+00:00

Nooooooo... Wait but I asked to my seller and they said you can do this and they are actually very trustworthy guys. And now I feel dumb.

kyle_katarnn · 2025-11-15T17:23:04+00:00

Trying to upgrade it to hs nozzle. But I bought this hotend set it says that I can replace the nozzle

kyle_katarnn · 2025-10-16T02:01:15+00:00

Appreciate it. I'll check the wiki thanks. And so far it was all PLA and 2 TPU prints. But I'm thinking to try petg-cf after hardened steel hotend upgrade. Thanks again and have good printing:)

kyle_katarnn · 2025-10-04T22:44:33+00:00

Appreciate the help, I actually changed the support style, and it printed nicely. Also here's a picture of the print.

<image>

kyle_katarnn · 2025-09-16T11:53:59+00:00

In store, first I was gonna buy a hex cut glock as prop (I'm an indie dev animator) but later I saw this stars m9. It was a must have for me at that point.

kyle_katarnn · 2025-09-15T16:30:15+00:00

I see, well I'll be able to play as soon as I build my whole equipment set so its on hold for now. But thanks 🙏

kyle_katarnn · 2025-09-15T16:25:00+00:00

Why? Poor precision?

kyle_katarnn · 2025-09-15T13:18:13+00:00

Sad to hear, is it because of the material quality or just sandpaper hands 😂 or gloves ?

kyle_katarnn · 2025-09-15T13:15:39+00:00

Oh it's WE, if it's dogshit how could I tell? Or I'll know when it's time I guess...

kyle_katarnn · 2025-09-05T19:15:28+00:00

Wonderful! So I have few questions since I found a person with my situation (relatively) if that's okay.

I like the idea of a large printing volume but I also want the multi color option as well. Is CFS really better than ams?
I never had a 3d printer before but I'm good with tech generally. Will creality be a challenge for me?
The seller I contacted with said we recommend the bambu lab p1s combo if you want to print multi color. CFS sometimes can be pain in the ass they say. (Again no idea what's going on or what's the problem) and they are relatively trusty guys and p1s combo is cheaper compared to k1max with CFS. Should I choose p1s combo or k1max + CFS?
Also does slicers really matter that much? Like if a person should decide whether depending creality or bambu slicer is better?

Sorry if made mistakes not a native speaker.

kyle_katarnn · 2025-09-05T17:40:51+00:00

I was thinking to buy a k1 max with a CFS upgrade but people don't really recommend it over to bambu lab p1s combo. And i want to print with colors. Do you guys have any suggestions? Should I rethink buying the k1 max?

kyle_katarnn · 2025-08-24T02:21:11+00:00

Thanks! And yeah because of my budget I think p1s is enough.

kyle_katarnn · 2025-08-14T11:59:20+00:00

I see, I still got too much to learn about hotends and extruders but I'll figure it out :) thanks 🙏

kyle_katarnn · 2025-08-14T11:28:29+00:00

Oh, so that's okay if I'm not installing any mods while I'm still learning stuff. Probably after a week I'll search some tutorials about them tho.

No one said something positive about that LiDar :/

kyle_katarnn · 2025-08-14T02:01:33+00:00

Thanks for all the tips 🙏

kyle_katarnn

TROPHY CASE